Look up Part 21 in the CASA website.
Unfortunately the intent of Part 21 for amateur
built aircraft has become subverted in CASA's
regulatory re-writes and the current SAAA is too inept to defend it.
Mike
At 07:27 PM 8/31/2015, you wrote:
What if you are not the manufacturer, but your
on.net] *On Behalf Of *Peter Champness
> *Sent:* Monday, 31 August 2015 6:57 PM
> *To:* Discussion of issues relating to Soaring in Australia. <
> aus-soaring@lists.internode.on.net>
> *Subject:* Re: [Aus-soaring] Aerodynamics
>
>
>
> What if you are not the manufacturer, b
What if you are not the manufacturer, but your aircraft is registered as
experimental. Does that give you the freedom to experiment?
On Mon, Aug 31, 2015 at 3:42 PM, Mark Newton wrote:
> There's plenty of guidance from SAAA.
>
> If you’ve built an EAB aircraft, you’re
From: aus-soaring-boun...@lists.internode.on.net
[mailto:aus-soaring-boun...@lists.internode.on.net] On Behalf Of Peter Champness
Sent: Monday, 31 August 2015 6:57 PM
To: Discussion of issues relating to Soaring in Australia.
<aus-soaring@lists.internode.on.net>
Subject: Re: [Aus-s
On 27 Aug 2015, at 10:50 am, Ross McLean ross...@bigpond.net.au wrote:
Beautiful!
And despite what CASA says, these guys had no problems mounting GoPro's on
the wings.
It’s an Experimental. CASA is happy for you to mount as many gopros on the
wings of those as you like, as long as they
There's plenty of guidance from SAAA.
If you’ve built an EAB aircraft, you’re the manufacturer, you’re the authority
that approves modifications. So if you want to put a camera mount on it, you
just need to give due consideration in the design to make sure it doesn’t fall
off (same as any
Is there a CASA web page about experimental aircraft phase 1 testing?
On Mon, Aug 31, 2015 at 8:47 AM, Mark Newton new...@atdot.dotat.org wrote:
On 27 Aug 2015, at 10:50 am, Ross McLean ross...@bigpond.net.au wrote:
Beautiful!
And despite what CASA says, these guys had no problems mounting
http://www.airspacemag.com/daily-planet/bugatti-racer-finally-takes-flight-180956361/
Look at the blended wing/fuselage intersection at the leading edge.
Mike
Borgelt Instruments - design manufacture of quality soaring
instrumentation since 1978
www.borgeltinstruments.com
tel: 07
...@lists.internode.on.net] On Behalf Of Mike
Borgelt
Sent: Thursday, 27 August 2015 6:22 AM
To: Discussion of issues relating to Soaring in Australia.
Subject: Re: [Aus-soaring] Aerodynamics
http://www.airspacemag.com/daily-planet/bugatti-racer-finally-takes-flight-1
80956361/
Look at the blended wing/fuselage
-soaring-boun...@lists.internode.on.net
[mailto:aus-soaring-boun...@lists.internode.on.net] *On Behalf Of
*Mike Borgelt
*Sent:* Thursday, 27 August 2015 6:22 AM
*To:* Discussion of issues relating to Soaring in Australia.
*Subject:* Re: [Aus-soaring] Aerodynamics
http://www.airspacemag.com/daily
.'
*Subject:* Re: [Aus-soaring] Aerodynamics
Beautiful!
And despite what CASA says, these guys had no problems mounting GoPro's on
the wings.
ROSS
_
*From:* aus-soaring-boun...@lists.internode.on.net
10:50 AM
To: 'Discussion of issues relating to Soaring in Australia.'
Subject: Re: [Aus-soaring] Aerodynamics
Beautiful!
And despite what CASA says, these guys had no problems mounting GoPro's on
the wings.
ROSS
Adam,
I think that it is fairly obvious that your extracter is working. But it
is probably not a good thing that you are getting leakage from the
wing/fuse junction?? For what it is worth.
Ron
On 14 April 2013 16:24, Adam Woolley go_soar...@hotmail.com wrote:
G'day all,
In the past my
I was going to say that it indicates that before we only thought it but now
we have proof that the cirrus really does suck. ... but I'm not going to say
that.
cheers
JR
___
Aus-soaring mailing list
Aus-soaring@lists.internode.on.net
To check or change
It indicates to me that you should seal the pushrods where they come
out of the wing.
You can make seals from spinnaker cloth. Used to be a common thing to
do before the manufacturers put seals in the wingroots.
Mike
At 04:24 PM 14/04/2013, you wrote:
G'day all,
In the past my wing
Add a porous skin and plumb it to the vent. Boundary layer suction complete
___
Aus-soaring mailing list
Aus-soaring@lists.internode.on.net
To check or change subscription details, visit:
http://lists.internode.on.net/mailman/listinfo/aus-soaring
Don't tease me James, you know I'd probably do it if pushed!
On 14/04/2013, at 20:24, james dutschke james.m.dutsc...@gmail.com wrote:
Add a porous skin and plumb it to the vent. Boundary layer suction complete
___
Aus-soaring mailing list
relating to Soaring in Australia.
Subject: Re: [Aus-soaring] Aerodynamics Query
Don't tease me James, you know I'd probably do it if pushed!
On 14/04/2013, at 20:24, james dutschke james.m.dutsc...@gmail.com wrote:
Add a porous skin and plumb it to the vent. Boundary layer suction
...@lists.internode.on.net] On Behalf Of Adam Woolley
Sent: Monday, 15 April 2013 6:04 AM
To: Discussion of issues relating to Soaring in Australia.
Subject: Re: [Aus-soaring] Aerodynamics Query
Don't tease me James, you know I'd probably do it if pushed!
On 14/04/2013, at 20:24, james dutschke
This is an interesting paper. Found while searching for information
on Dick Butler's Concordia project
http://www.frotor.fs.cvut.cz/doc/37.pdf
Check out the aspect ratio of Concordia project.
Mike
Borgelt Instruments - manufacturers of quality soaring instruments
phone Int'l + 61 746 355784
Is there any news on when Dick might have one flying?
Looks like the Sinha detubulator is also undergoing some improvements but no
mass production as yet
Nigel
This is an interesting paper. Found while searching for information
on Dick Butler's Concordia project
At 09:29 AM 25/09/2007, you wrote:
Is there any news on when Dick might have one flying?
Looks like the Sinha detubulator is also undergoing some improvements but no
mass production as yet
Nigel
Nope, that was the only thing that I could find. I didn't try very hard though.
Mike
Borgelt
22 matches
Mail list logo