of batmand is bmx6/7, which is actively developed, has IPv6
support, originator message aggregation support and many other bells and
whistles.
There might be a *BSD port already, but I don't know. Porting bmx* should be
relatively easy, as it is a IP routing daemon.
Cheers,
Elektra
On Tue, 13
to refer to this project. The
project is about mesh.networking - so the domain name matches that very nicely.
Cheers and thanks again,
Elektra
--
Viral meme of radical freedom
The fact that you talk in your head doesn't mean that you think.
The best way to lose control over yourself is trying
.
This year I'm on a tight budget. So if anyone wants to throw in a coin or two
to share the costs, this would be appreciated. The amount due this year is
around 39 Euro.
If you want to donate, drop me a personal e-mail.
Cheers,
Elektra
, use the
network announcement feature of batmand: -a
Happy testing!
Elektra
On Wed, 30 Mar 2016 07:31:45 +
Mika Rajala <mika.raj...@patria.fi> wrote:
> Hi
>
> I'm using the latest batmand with ns-3 to test routing.
>
> I'm a bit of a newbie with this stuff, so this m
Hi Sven -
commited. Thank you!
Cheers,
Elektra
--
Elektra <onelek...@gmx.net>
Hi Sven –
commited. Thank you!
Cheers,
Elektra
at hostapd.conf) and you
might have discovered that by pushing it to the limit. It might as well be the
limitation of your WiFi driver / hardware, though.
Cheers,
Elektra
--
Viral meme of radical freedom
The fact that you talk in your head doesn't mean that you think.
The best way
Hello Sven –
I have applied your pending patches in 036ae...
Many thanks for your kind support!
Cheers,
Elektra
Hi -
Is there a bug ?
We can't exclude or confirm that from your report.
batmand + vis have been used by the Villagetelco community, I'm not assumming a
basic bug there.
Cheers,
Elektra
Hello –
applied in a27537a...
Thanks for your kind support.
Cheers,
Elektra
--
Elektra onelek...@gmx.net
Subject: [PATCH] Either all or no source file should #define _GNU_SOURCE.
Thanks to Sven Eckelmann and Michael Tautschnig for reporting and fixes.
---
Makefile|1 +
linux/route.c |1 -
posix/unix_socket.c |1 -
3 files changed, 1 insertion(+), 2 deletions(-)
diff
Applied in commit 1e275d939d45ecc1d96957a353dc639d28aefb52
Author: Elektra Wagenrad onelek...@gmx.net
Date: Thu Mar 21 15:57:45 2013 +0100
Either all or no source file should #define _GNU_SOURCE.
Thanks to Sven Eckelmann and Michael Tautschnig for reporting and fixing
manner. Unfortunately I know of none.
If anybody has something that actually works, I'd love to know.
Cheers,
Elektra
time. It is unlikely that
I will take up development on it again. I'd recommend to use OpenWrt for X86.
Cheers,
Elektra
Hi -
the wiki already stated quite clearly that this project is old, outdated and
unmaintained. The only new development is that the link to
http://zolder.scii.nl/~elektra is broken.
http://wiki.c-base.org/coredump/MeshLinux still works and has the ISO image.
The wiki now reads as follows
compile any other software package in this build environment?
Cheers,
Elektra
--
Viral meme of radical freedom
The fact that you talk in your head doesn't mean that you think.
The best way to lose control over yourself is trying to control yourself.
Most people experience themselves
Applied, thanks!
Cheers,
Elektra
Am Freitag, 23. Dezember 2011 13:15:50 schrieb Sven Eckelmann:
Signed-off-by: Sven Eckelmann s...@narfation.org
---
INSTALL|9 +-
Makefile | 18
bsd/compat.c | 53 -
bsd/kernel.c | 145
Applied, thanks!
Cheers,
Elektra
Am Freitag, 23. Dezember 2011 13:15:52 schrieb Sven Eckelmann:
Signed-off-by: Sven Eckelmann s...@narfation.org
---
CHANGELOG |2 +-
INSTALL | 16
man/batmand.8 |2 +-
3 files changed, 10 insertions(+), 10 deletions
Applied, thanks!
Cheers,
Elektra
Am Sonntag, 1. Januar 2012 00:41:39 schrieb Sven Eckelmann:
Signed-off-by: Sven Eckelmann s...@narfation.org
---
Makefile|2 +-
allocate.c |2 +-
allocate.h |2 +-
batman.c|2 +-
batman.h
Applied, thanks!
Cheers,
Elektra
Am Sonntag, 1. Januar 2012 00:41:40 schrieb Sven Eckelmann:
Signed-off-by: Sven Eckelmann s...@narfation.org
---
Makefile |2 +-
allocate.c|2 +-
allocate.h|2 +-
hash.c|2 +-
hash.h|2 +-
list-batman.c
Hi -
thanks for the tip!
Cheers,
Elektra
in 9cd7382.
Thanks!
Cheers,
Elektra
Hi -
A short amendment to avoid potential misunderstandings:
thanks for clarifying.
Cheers,
Elektra
me beforehand?
Elektra
--
Viral meme of radical freedom
The fact that you talk in your head doesn't mean that you think.
The best way to lose control over yourself is trying to control yourself.
Most people experience themselves as a voice in their head, telling them
who they are, what
instead.
Unfortunately, I can`t get internet too.
You will be there in no time ;)
Cheers,
Elektra
--
Viral meme of radical freedom
The fact that you talk in your head doesn't mean that you think.
The best way to lose control over yourself is trying to control yourself.
Most people
!) tunnel.
Cheers,
Elektra
--
Viral meme of radical freedom
The fact that you talk in your head doesn't mean that you think.
The best way to lose control over yourself is trying to control yourself.
Most people experience themselves as a voice in their head, telling them
who they are, what
.
The requirement to enter a IP via the phone keypad is not exactly zero
configuration, but given
the enormous set of features that we can offer, it is pretty close. Thanks!
Cheers,
Elektra
The current vis server JSON output format is breaking the json_decode()
function for PHP.
This patch mainly:
- Removes all spaces
- Removes all the \t TABS
- Double quotes the string-variables
Reported-by: Alberto Escudero-Pascual a...@it46.se
Signed-off-by: elektra onelek...@gmx.net
The current vis server JSON output format is breaking the json_decode()
function for PHP.
This patch mainly:
- Removes all spaces
- Removes all the \t TABS
- Double quotes the string-variables
Reported-by: Alberto Escudero-Pascual a...@it46.se
Signed-off-by: elektra onelek...@gmx.net
Hi Sven -
AFAIK *vis* has no maintainer at the moment.
I am currently working on the routing loop issue in batmand and link-local OGM
aggregation, in order to improve scalability.
Will do some testing at the Battlemesh.
Cheers,
Elektra
in a Layer 3 mesh.
Cheers,
Elektra
anybody shed some light on this, please?
facilities are available and rented from Monday to Sunday. So if you wish to
spend more time (like me and most participants, I suppose) you can join
earlier than the official opening.
Cheers,
Elektra
there but practically broken. I
know of no proprietary vendor driver that works properly.
The fact that you are usually bound to a very old version of Linux is telling.
I only use / promote chips with decent open-source support. OpenWrt is
awesome.
Cheers,
Elektra
EIRP.
Any device with a external antenna connector can be used together with a high-
gain antenna. Again you get far beyond the legal limits.
Cheers,
Elektra
Hello list -
Bracciano is the place to be between June 2nd and 6th this year. See our
algorithms perform compared to others, swim in the lake, have barbeque, meet
cool people, have nice Italian food and wine and hack all day all night
long!
Cheers,
Elektra
Hello Simon -
I'll be in hall 13 at the booth of Atcom E42 to present the Mesh-Potato
router. (With B.A.T.M.A.N. inside, of course) Will arrive tomorrow afternoon
and be there until Saturday 18:00.
Cheers,
Elektra
no, sorry, and i won't be able to do it this week as i am at the cebit
IBSSID...
Cheers,
Elektra
(cu @26c3:)
Hi George -
Are any freifunk networks purely peer-to-peer, without any server or
core nodes ?
That is, are any freifunk networks using ipv6 autoconf, or zeroconf ?
I suggest to post this question on the Freifunk mailing list.
Cheers,
Elektra
Hi!
Out of curiousity, what does the freifunk network use for assigning IPs ?
At Freifunk Berlin users register with a user name and a valid e-mail address.
Then you can register IPs in the data base.
Cheers,
Elektra
-deutsch/much..html
Read your own writing on the OLSR-users list below.
Cheers,
Elektra
[Olsr-users] Current OLSR protocol
L. Aaron Kaplan aaron at lo-res.org
Fri May 22 14:29:52 UTC 2009
Previous message: [Olsr-users] Current OLSR protocol
Next message: [Olsr-users] Current OLSR protocol
with our data. Again, debugfs seems like a good
solution. That does not need to be decided now but could be a consistent
path towards mainline integration.
Seems like the way to go.
Cheers,
Elektra
subnetworks 0.0.0.0/1 and 128.0.0.0/1
instead of 0.0.0.0/0.
batmand -a 0.0.0.0/1,128.0.0.0/1 your interface
Cheers,
Elektra
to say big THANKS to all people - testers, developers - that are
contributing to the project. Marek, Andrew, Sven, Axel, Yang, Antoine,
Simon... - it is a great joy for me to see your contributions!
Cheers,
Elektra
. Don't start
batman-adv.
Send broadcasts (by sending ping to the networks broadcast address for
example) and check if the driver reports the same behaviour or not.
Cheers,
Elektra
I'm using Openwrt/compat-wireless-2009-06-25 on a AR7161 board. I'm using
ath9k trying to get 11n speed for batman
with 6 nodes is not pushing things to the limit
for the Batman protocol (well, you can decrease the OGM interval to a
much smaller value than 1 second!). But it will help developers to find
bugs in recent code changes if you happen to test new versions.
Cheers,
Elektra
I have 6 fonera
and convergence speed (both
topics are linked to each other, of course) is something we should work
on - and hammering your head on algorithms is fun.
Cheers,
elektra
Hello!
I have about 20 weeks to do the master thesis. This time includes: getting
familiar with the protocol, gathering
switching when NAT is used on the
gateway. With IPv6 NAT on gateways should become superfluous one sunny
day :-)
Cheers,
elektra
these
protocols which are not designed to deal with a high level of packetloss
have difficulties to work on a Layer 2 mesh as the number of hops and
packet loss on the media increases)
Cheers,
elektra
Hi!
My name is Vojislav Marinkovic and I am a student of Electrical Engineering
don't need to use -a to connect to
the internet in your case, however. But you have to set up simple NAT towards
the interface of the batman-gateway connected to the ADSL modem.
If that interface is eth0 the command would be:
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
Cheers,
elektra
Hi .
Any Hints?
sure: You are not announcing a default route.
On mesh router connected to ADSL:
batmand -g 1000 ath0
On other mesh router:
batmand -r 1 ath0
You have to NAT towards the internet on the gateway.
Cheers,
elektra
:
wlanconfig ath0 create wlandev wifi0 wlanmode adhoc nosbeacon
iwconfig ath0 ap 02:CA:FF:EE:BA:BE
This is the only driver that works reliably. Broadcom proprietary driver with
IBSS-fix hack works also (Linux 2.4.X from OpenWrt only)
Happy meshing!
cu elektra
I just installed OpenWRT
in Ahdemo mode - and you
have the possibility to set up a AP VAP on the same interface, too.
Performance is fine. That may be different if you run a Ahdemo-only network in
range with other wireless networks - they won't detect collisions, hence
performance can suffer.
Cheers,
elektra
is Zydas, I guess.
cu elektra
:CA:FF:EE:BA:BE
# Configure IP of VAP interface
ip a add 103.130.30.10/8 brd 103.255.255.255 dev ath0
# Switch it on.
ip link set ath0 up
# Start batmand with preferred internet gateway
batmand -p 103.130.1.67 ath0
cu elektra
Subject says it all.
cu elektra
.
I've heard wmfhotspot for windows mobile is just thesame... and best
of all the HTC brand consumes more energy than it's charger so even
with a powerplug you have no chance :-)
That sounds like a miserable design.
Cheers,
elektra
Hi -
the Meraka server is not available, so the link to the PDF is currently
broken. Use http://downloads.open-mesh.net/batman/misc/batman_ifip.pdf
for now.
cu elektra
Hi -
somehow the initial posting from Juliusz (j...@pps.jussieu.fr
juliusz.chroboc...@pps.jussieu.fr) got lost.
elektra
Dear all,
For some time now, I've been wanting to comment on the BATMAN
protocol. The following are my conclusions from a careful reading of
the BATMAN draft dated 7
, the protocol should start using
different channels. There is however no dedicated mechanism to coordinate the
re-use of channels. Therefore Batman will need traffic in order to channel
adaption. However this is AFAIK untested, and we'd love to hear about your
results.
cu elektra
I am
Hi -
I'd say if you run a data network you can run BATMAN on it. For packet
radio you may want to choose a Originator interval in the range of 30
seconds or more, though.
cu elektra
Hello
would it be possible to use BATMAN over CB Funk?
Thanks
-- Forwarded message
...
cu elektra
Hi thanks for the feedback
CB Funk is only up to 9000 baud, that is too slow.
The question is, if every laptop has a HDSPA WIMAX stick, if those can
connect directly to each other, so, that they can exchange data,
the answer is now, as both need a SIM card, but then the question
Hi Holger -
great, tnx! apt-get install batman (0.2) works even in Ubuntu now!
cu elektra
Hi,
subject says it all, batmand 0.3-1 has been uploaded to Debian sid.
http://packages.qa.debian.org/b/batmand.html
regards,
Holger
interface depending on
the chipset/type of your wifi card.
cu elektra
Hello,
I have a 3 node mesh network with layout as follows:
node #1 node #2node #3
192.168.2.1 192.168.2.5192.168.2.9
Each node has only one radio and #1 talks to #3 via #2 and vice versa.
If I want
with a notebook I used a year
ago, but I didn't try that recently.
Broadcom would be an option, but the company doesn't provide drivers for
Linux-PCs. There is an open-source driver but I don't know whether it
actually works in ad-hoc mode now.
cu elektra
thanks, elektra, would
started to work on mesh networks I
have been battling with firmware/driver issues. But as more and more
people start using mesh networks the demand for working drivers is
increasing. So we can expect that - finally, after many years - the
situation will improve quickly.
cu elektra
hi
in ad-hoc,
but has range issues. As could be read recently in the news, Atheros is
actively sponsoring development of their hardware for the kernel now
(they are paying a guy to develop drivers).
cu elektra
Hi Elektra,
I haven't replied on the list about my problems with mesh networks but
I
with that I'll be
much more than happy.
If I could utter a wish to a fairy coming my way I would also ask to
have at least one good performing usb chipset for 802.11abgn that works
with Linux as well. I'd start assembling omnis and directionals with
usb-connector immediately ;-)
Cheers,
cu elektra
Hi -
correction: May 2nd-4th not May 2nd-5th.
cu elektra
Hi -
at the Wireless Community Weekend (May 2nd-5th in Berlin/Germany @
C-Base) there will be a test with 20+ Foneras running RO.B.I.N.
The B.A.T.M.A.N. developers will be around (maybe we'll miss Axel, he
wasn't sure whether he
on the throughput, and it was one of my worries in the early days
of the protocol design. As far as I have seen in practice this is not
the case.
That'd be great (and I'll test that tonight!)
Yes, please test it.
cu elektra
in the center
of the grid, B.A.T.M.A.N. was switching routes quite often (every few
seconds).
I see therefore no point in adding hysteresis. If someone can show that
there is an issue we can add hysteresis to the protocol.
cu elektra
I tried that but I think it's only for switching from a gateway
Hi -
I usually spend my wednesday evening there.
cu elektra
Hi,
my name is Solon and I'm trying to build a wifi network for the Studentendorf
Schlachtensee in Berlin. For various reasons, I'd like to integrate
BATMAN Advanced into the ROBIN-FW or any other FW that makes deployment
through
02:CA:FF:EE:BA:BE (or whatever cell-id you wish)
Also it is recommended to select the ministrel rate adaption mechanism
when loading the driver.
Try a recent Madwifi version from OpenWRT Kamikaze (i.e. get the
OpenWRT patches and apply them to the Madwifi version used in OpenWRT).
cu elektra
I don't know if anyone is interested
Thanks for posting.
cu elektra
Hi -
Sorry, I wasn't sure what constituted 'newer.'
quote
Btw.: IANA has assigned port 4305 for the newer versions of Batman. _So
if you are going to update to_ Experimental or Beta open the firewall
for udp ports 4305 and 4306 instead of 1966. 4305 is for protocol
messages, 4306 is used
Hallo Murphy -
das Angebot nehme Ich gerne an, Ich bin allerdings nur noch bis 6. Januar in
D - komme voraussichtlich Ende Januar zurück.
cu elektra
Hallo,
habe Deine Mail-Addresse nirgends gefunden, habe Chaosradio gehört
und da hattest Du gesagt, daß Du keine Fonera besitzt und
Hello Jan -
indeed, your report is the wage for our work. Your application is one of our
prime targets.
Cheers!
cu elektra
16, 2007 at 12:04:37PM +0200, elektra wrote:
We'll post a message to the list as soon as we think it is fixed and
worth a try.
i never saw that post (maybe i missed it?), so i only tested exp-0.3 :)
You didn't miss it. I still don't consider it usable.
cu elektra
One more idea:
How about forwarding the average TQ-Value of the best ranking neighbor instead
of the actual incoming value? This should avoid inconsistency amongst
TQ-Values to a great degree!
cu elektra
We'll post a message to the list as soon as we think it is fixed and
worth a try
a message to the list as soon as we think it is fixed and worth a
try.
Looking forward to the results!
Cheers!
cu elektra
I'm sorry to say that 0.3beta is not usable at the moment. We are in the
status of bug-hunting.
cu elektra
169.254.0.0/16 is the MDNS (multicast DNS) address space. Part of zeroconf
repectively 'Bonjour' (Apple Computers)
This has nothing to do with Batman.
cu elektra
This is a my opinion elektra, no criticism... all what we want is only
give hints and tips in order to improve batman.
Ok?
Sure. Why do you have the impression that your hints and tips are not
appreciated?
cu elektra
are sometimes unfortunate (choosing routes with
bad performance in transmit direction, rumors saying it is preferring routes
with small hopcount too much.) We are addressing this with 0.3 and in the
experimental branch of batmand.
Also it could indicate a problem with the wireless devices.
cu elektra
- the number of OGMs
received should provide enough information for the client to choose the right
gateway.
cu elektra
A client node take its decision about chosing a gateway in a unilateral
way, that is chosing gateway on a ranking basis (or wathever else)
checking the path node--gateway or node
We are going to use it. Unfortunately I can't start to work on this
project right now due to lack of time.
cu elektra
I have seen a testbed made with UML instances here to test OLSR:
https://wiki.funkfeuer.at/index.php/OLSR-NG
I was wondering if it would be possible to setup such system
of B.A.T.M.A.N.
We may write a draft of B.A.T.M.A.N.-IV as soon as it is properly
implemented and thoroughly tested.
cu elektra
Hi -
I just received mail from Yury Shevchuk, he has written a nice manpage
for batman-0.2. I really like it. There are a few typos and he is
considering it as a bug that 0.0.0.0/0 can't be announced via HNA ;-)
Have a look at it.
cu elektra
batmand-man.tgz
Description: GNU Unix tar
*. You
can share it on a non-commercial base with everyone for sure.
You are welcome using our software for community, civil - non
surveillance - and commercial use. If you have any further questions we
are happy to ask them. Comments, experiences are welcome.
Happy routing!
cu elektra
Greetings
If you have any further questions we
are happy to ask them.
Too much beer yesterday...
Hi -
please use the most recent version in the download section for your
tests. There are known bugs in 0.1.
Happy routing!
cu elektra
Hi,
We met with several people in Brussels active on the reseaucitoyen
project to test Batman.
Our configuration was 4 laptops like this:
laptop1
90 matches
Mail list logo