On Wed, May 11, 2011 at 02:06:44PM -0700, Jerry Lowry wrote:
another mistake on my part. You have to give bls the correct spelling
of the volume ( sometimes I wonder )
Once I corrected the volume name this is the results I get:
Volume Record: File:blk=0: 206 Sessid=16 SessTime=1303843290
On 12/05/11 12:41, Mike Seda wrote:
During my research on the above solution, I read that it's possible to
run multiple storage (and director) daemons. This was very interesting
to me, but I'm just wondering what the reasons would be for doing so.
I'm running two storage daemons, each on a
Hi,
since i have upgraded our Backup Server to Debian Squeeze and Bacula
5.0.2 the Jobs are only write with ~ 5 MB/s.
status storage:
Device IBMLTO4-sd (/dev/nst0) is mounted with:
Volume: MITT01
Pool:MittwochPool
Media type: LTO4
Total Bytes=157,171,864,755
Hello,
I just installed bacula for a first time, successfully configured it
and checked that backup-restore to file storage works. The next step
is to use the tape service (CASTOR), which is a little bit special in
our organization (CERN). To write/read to/from a tape I need to use a
command
Hi,
i would like to bscan an old archive back into bacula.
Name: Vol0029
Size: 50GB, File Based
bls -j -V Vol0039 Backup-Long
--
11-May 13:36 bls JobId 0: Ready to read from volume Vol0039 on device
Backup-Long (/mnt/backup-long).
Volume Record: File:blk=0:185 SessId=64 SessTime=128860
2010/11/22 Paulo Martinez martinez...@googlemail.com:
Dear List,
i have still problems by enabling encryption and hfsplussupport for
osx's fs.
Setup: fd on osx, dir and sd on linux and data encryption enabled for
fd .
FileSets for the osx client is configured on the linux box (dir
Hi,
for some reason old backups are still in the database, even if they are purged.
| 635 | Vol0635| Purged| 1 |928,733,695 |
0 |7,776,000 | 0 |0 | 0 | File | 2010-10-11 23:47:09
|
| 636 | Vol0636| Purged|
Am 12.05.2011 13:14, schrieb Richard Marnau:
Hi,
for some reason old backups are still in the database, even if they are
purged.
| 635 | Vol0635| Purged| 1 |928,733,695 |
0 |7,776,000 | 0 |0 | 0 | File | 2010-10-11
As indicated in the following excerpt from the Bacula Manual, the list
of included files can be contained in a separate file. I would like to
do the same with files to be excluded. Is this not possible using the
same method?
Any file-list item preceded by a less-than sign () will be taken to
Le 12/05/2011 15:17, Dan Schaefer a écrit :
As indicated in the following excerpt from the Bacula Manual, the list
of included files can be contained in a separate file. I would like to
do the same with files to be excluded. Is this not possible using the
same method?
Any file-list item
Am 12.05.2011 13:14, schrieb Richard Marnau:
Hi,
for some reason old backups are still in the database, even if they
are purged.
| 635 | Vol0635| Purged| 1 |928,733,695
|0 |7,776,000 | 0 |0 | 0 | File |
2010-10-11
On 05/12/2011 09:49 AM, Jérôme Blion wrote:
Le 12/05/2011 15:17, Dan Schaefer a écrit :
As indicated in the following excerpt from the Bacula Manual, the list
of included files can be contained in a separate file. I would like to
do the same with files to be excluded. Is this not possible
I am setting up Bacula for the first time. I am attempting to test it
by backing up a test folder on an XP machine.
Here are the messages I get when I try to run my job:
12-May 08:45 DoraleeII-dir JobId 26: No prior Full backup Job record found.
12-May 08:45 DoraleeII-dir JobId 26: No prior or
The file I have setup to backup is: C:\jaketestfolder It isn't a
network share or anything, just a folder I created with a couple .mpeg
in there so give it something to backup.
On Thu, May 12, 2011 at 9:29 AM, John Drescher dresche...@gmail.com wrote:
I am setting up Bacula for the first time.
On Thu, May 12, 2011 at 09:36:37AM -0500, Jake Debord wrote:
The file I have setup to backup is: C:\jaketestfolder It isn't a
network share or anything, just a folder I created with a couple .mpeg
in there so give it something to backup.
Have you tried this?
C:/jaketestfolder
(forward slash
The file I have setup to backup is: C:\jaketestfolder It isn't a
network share or anything, just a folder I created with a couple .mpeg
in there so give it something to backup.
Okay. I searched the archives for No drive letters found for
generating VSS snapshots. but did not find any
Ok error@blocksize :D Sorry
regards
Tobias
# Stegbauer Datawork
# Tobias Dinse
# Oberjulbachring 9, 84387 Julbach
On 12.05.2011 11:29, Tobias Dinse wrote:
Hi,
since i have upgraded our Backup Server to Debian Squeeze and Bacula
5.0.2 the Jobs are only write with ~ 5 MB/s.
status
Thanks, I haven't tried that yet! I'll change it, and give it another
try. I'll let you know if that fixes it.
On Thu, May 12, 2011 at 9:59 AM, John Drescher dresche...@gmail.com wrote:
On Thu, May 12, 2011 at 10:57 AM, Jake Debord jake.deb...@gmail.com wrote:
Thank you I appreciate that, I
I am using webmin to edit Bacula. I went to file sets, and changed the
files and directories to backup
Everytime I change it to c:/jaketestfolder when I save it, it reverts
it back to c:\jaketestfolder
That normal? Should I just change it in the conf?
On Thu, May 12, 2011 at 10:05 AM, Jake
I am using webmin to edit Bacula. I went to file sets, and changed the
files and directories to backup
Everytime I change it to c:/jaketestfolder when I save it, it reverts
it back to c:\jaketestfolder
That normal?
No. But by your second question you are not editing the configuration
file
Ok edited the conf directly and reloaded through bconsole.
Any other Ideas?
Same error:
12-May 10:22 DoraleeII-dir JobId 28: Start Backup JobId 28,
Job=XPtest.2011-05-12_10.22.35_04
12-May 10:22 DoraleeII-dir JobId 28: Using Device FileStorage
12-May 10:22 jake-laptop-fd JobId 28: DIR and FD
On Thu, May 12, 2011 at 11:28 AM, Jake Debord jake.deb...@gmail.com wrote:
Ok edited the conf directly and reloaded through bconsole.
Any other Ideas?
Same error:
Can you post your bacula-dir.conf?
You can zap the passwords if you want.
John
Have you tried turning off VSS for this FileSet?
Enable VSS = no
On Thu, May 12, 2011 at 11:28 AM, Jake Debord jake.deb...@gmail.com wrote:
Ok edited the conf directly and reloaded through bconsole.
Any other Ideas?
Same error:
12-May 10:22 DoraleeII-dir JobId 28: Start Backup JobId 28,
Sure, here you go:
#
# Default Bacula Director Configuration file
#
# The only thing that MUST be changed is to add one or more
# file or directory names in the Include directive of the
# FileSet resource.
#
# For Bacula release 5.0.2 (28 April 2010) -- ubuntu 10.10
#
# You might also want
On Thu, May 12, 2011 at 10:28:13AM -0500, Jake Debord wrote:
Ok edited the conf directly and reloaded through bconsole.
Any other Ideas?
Same error:
12-May 10:22 DoraleeII-dir JobId 28: Start Backup JobId 28,
Job=XPtest.2011-05-12_10.22.35_04
12-May 10:22 DoraleeII-dir JobId 28: Using
No I haven't. Do I need to add the to the Job block in the dir conf?
or is there a setting I'm overlooking?
On Thu, May 12, 2011 at 10:31 AM, Kevin O'Connor
kevin.ocon...@arc90.com wrote:
Have you tried turning off VSS for this FileSet?
Enable VSS = no
On Thu, May 12, 2011 at 11:28 AM, Jake
On Thu, May 12, 2011 at 11:35 AM, Jake Debord jake.deb...@gmail.com wrote:
Sure, here you go:
#
# Default Bacula Director Configuration file
#
# The only thing that MUST be changed is to add one or more
# file or directory names in the Include directive of the
# FileSet resource.
#
Part of the FileSet resource.
On Thu, May 12, 2011 at 11:40 AM, Jake Debord jake.deb...@gmail.com wrote:
No I haven't. Do I need to add the to the Job block in the dir conf?
or is there a setting I'm overlooking?
On Thu, May 12, 2011 at 10:31 AM, Kevin O'Connor
kevin.ocon...@arc90.com
}
Client {
Name = jake-laptop-fd
Password = **
Address = 10.0.6.107
FDPort = 9102
Catalog = MyCatalog
File Retention = 30 days
Job Retention = 6 months
}
FileSet {
Name = WinXPTest
Include {
File = C:/jaketestfolder
Options {
}
On Thu, May 12, 2011 at 10:35:29AM -0500, Jake Debord wrote:
Sure, here you go:
I don't think your fileset is connected to your job.
If you are using fileset WinXPTest and job XPtest, then job XPtest should have:
FileSet = WinXPTest
whereas it currently has:
FileSet = Full Set
#
# Default
Thank you, I changed it from Fullset to another option I had
predefined but forgot to switch to it. I changed it to WinXPtest which
pointed to C:/jaketestfolder
Ran it without a hitch! Thanks everyone I appreciate the help.
On Thu, May 12, 2011 at 10:40 AM, John Drescher dresche...@gmail.com
Yea, that is exactly what I did. Thanks! :)
On Thu, May 12, 2011 at 10:40 AM, J. Echter
j.ech...@elektro-mayer-echter.de wrote:
}
Client {
Name = jake-laptop-fd
Password = **
Address = 10.0.6.107
FDPort = 9102
Catalog = MyCatalog
File Retention = 30 days
Job
thanks for the help. Looks like I have some digging to do to figure out
what is actually happening. I know that I one time I had some problems
with the raid controller. I have since gotten that resolved.
If the volume has been recycled will the corruption remain with the
volume or will it
On Wed, May 11, 2011 at 6:08 PM, John Drescher dresche...@gmail.com wrote:
That restart doesn't work.
Then we will need some more information. I need the output of
list media pool=YourPoolName
Also the bacula messages that are displayed when you run your job.
John
*list media
On Thu, May 12, 2011 at 1:14 PM, pedro moreno syxt...@gmail.com wrote:
On Wed, May 11, 2011 at 6:08 PM, John Drescher dresche...@gmail.com wrote:
That restart doesn't work.
Then we will need some more information. I need the output of
list media pool=YourPoolName
Also the bacula messages
On Thu, May 12, 2011 at 10:56 AM, John Drescher dresche...@gmail.com wrote:
On Thu, May 12, 2011 at 1:14 PM, pedro moreno syxt...@gmail.com wrote:
On Wed, May 11, 2011 at 6:08 PM, John Drescher dresche...@gmail.com wrote:
That restart doesn't work.
Then we will need some more information. I
This is version 2.0 of my checkhost tool.
Significant changes from previous version (v1.1):
- Now has the ability to send a wake-on-LAN packet to each client before
checking for client connection
- Reads client hardware Ethernet addresses from a DB table (schema
documented in the tool)
- Now
On 05/12/11 14:57, Phil Stracchino wrote:
This is version 2.0 of my checkhost tool.
Except that somehow I accidentally attached the wrong version. Let's
try this again.
To make up for the error, here's a standalone lanwake tool using the
same DB backend as well.
--
Phil Stracchino, CDK#2
Hello Bacula Users,
There's some way to see the progress of a Backup or Restore during your
execution? Because with the status dir command, I can just see the backup
is running and nothing more. I didn't found nothing in the Manual about
that too.
Thanks in advance.
Rickifer Barros.
2011/5/12 Rickifer Barros rickiferbar...@gmail.com:
Hello Bacula Users,
There's some way to see the progress of a Backup or Restore during your
execution? Because with the status dir command, I can just see the backup
is running and nothing more. I didn't found nothing in the Manual about
Rickifer Barros schrieb:
There's some way to see the progress of a Backup or Restore during your
execution? Because with the status dir command, I can just see the backup
is running and nothing more. I didn't found nothing in the Manual about
that too.
try status client=yourclientname. This
Rickifer Barros writes:
There's some way to see the progress of a Backup or Restore during your
execution? Because with the status dir command, I can just see the backup
is running and nothing more. I didn't found nothing in the Manual about
that too.
Once you know which client is running, the
Ok, but, I would like to see a estimated time for the end of the backup or
even the transfer rate, but, if there's no way, ok.
Thanks John.
On Thu, May 12, 2011 at 4:30 PM, John Drescher dresche...@gmail.com wrote:
2011/5/12 Rickifer Barros rickiferbar...@gmail.com:
Hello Bacula Users,
Yes! This command status client works fine for what I wanted, but, I think
that it will be cool if Bacula calculate the estimated time based on these
information and show it with the command status client.
Thank you everyone.
On Thu, May 12, 2011 at 4:38 PM, hymie! hy...@lactose.homelinux.net
Ok, but, I would like to see a estimated time for the end of the backup or
even the transfer rate, but, if there's no way, ok.
There is no way inside bacula.
John
--
Achieve unprecedented app performance and
Hello,
I am using Cancel Duplicate Jobs =yes to avoid duplicate jobs from
running. This is working great except I get a Fatal error: JobId
already running. Duplicate job not allowed. error message
everytime a duplicate job is canceled.
Does anyone know if it is possible to suppress this
46 matches
Mail list logo