info available.
#0 0x in ?? ()
No symbol table info available.
#0 0x in ?? ()
No symbol table info available.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL
is actually stored on your backup media? (What was the
FD/SD Bytes Written message when you performed the backup? What
does list volumes etc. give?)
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80
-1
[Note: both patches are mutually exclusive.]
Hope this helps.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Those who will be able to conquer software
08783000-087a4000 rw-p 08783000 00:00 0 [heap]
b7f95000-b7f96000 rw-p b7f95000 00:00 0
b7fb2000-b7fbb000 rw-p b7fb2000 00:00 0
bfea5000-bfebb000 rw-p bfea5000 00:00 0 [stack]
Aborted (core dumped)
Any ideas what might go wrong?
Best regards,
Wolfgang Denk
--
Software
to look for?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Is a computer language with goto's totally Wirth-less
()? DEVICE::rewind()?
Let's see...
Right. A 'mt -f ... rewind' hangs, too. so this is in fact a kernel
(driver) problem, and not bacula's fault.
Thanks.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142
),
refers to the Maximum Volumes and Maximum Volume jobs directives.
Yes, but please note the spelling. The last letter is a 'm', not a 'n'.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email
possible at all?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Conceptual integrity in turn dictates that the design must proceed
from one mind, or from
-host=XXX
- make
That's all.
OM, on second thought I think the critical RPM that is needed must be
gnome-libs-devel, because this imports a lot of vital header files.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142
for cleaning tape with a special LED, also
manufacurer tells you only to use cleaning tape when asked for it
Or (some) autoloaders can be configured to run cleaning cycles
automagically when they need it.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime
backaups in a single magazine which I replace each
Monday morning - works fine for me.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Karl's version of Parkinson's
In message [EMAIL PROTECTED] you wrote:
Why not add a large enough hd, move ALL the data to it and then softlink the
entire directory to the new drive.
Why not using LVM so this problem just does not happen at all?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded
in place with all relevant data is IMHO a very, very serious error.
For me it's close to being a killing point :-(
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Why
.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Life, loathe it or ignore it, you can't like it.
- Marvin the paranoid android
it tuirned on for differential and
incremental ones.
I didn't find out yet how to do this. Any pointers?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
The speed
will a restore be much faster compared to a tape
where all A data are consecutive, followed by all B and then all
C data?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL
because data transfer from the FDs is simultaneous.
Thanks for the confirmation!
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Madness has no purpose. Or reason
. Everything is fine.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
I will also, for an appropriate fee, certify that your keyboard is
object-oriented
at bacula, or at least at the bacula tape
access pattern.
Has anybody else ever seen something like this? Any ideas what to
look for?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email
and is
not available and does not compile for current kernel versions.
Lesson learned.]
Thanks anyway.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
[Doctors
DDS-3
Ummm... bacula can access the media just fine for backup, so why does
it complain on restore?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
365 Days
=No such file or directory
...
I have no hardlink related settings in any of my config files, i. e.
I expect that the default setting of hardlinks=yes takes effect.
What might have caused the above problem, and how can it be avoided?
Best regards,
Wolfgang Denk
--
Software Engineering
; mt -f /dev/nst0 stoptions 0 after mounting
a tape; if this is an autoloader device, add these commands to your
mtx-changer script after loading a tape.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49
message Strange SCSI problems of March 13 on this list.
Check your system logs if you see any error messages there; look
especially for messages like these: sense key Unit Attention,
Additional sense: Power on, reset, or bus device reset occurred.
Best regards,
Wolfgang Denk
--
Software
relative or absolute path names.
I've been told at that time that one must not use --one-file-system
and --listed-incremental in one call, which makes this unusable for
any bigger systems with mounted partitions.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime
-hostname.conf) which we include
in bacula-dir.conf; with such a setup it is easy judt to comment out
the include statement.
And it makes the config file much more readable...
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10
good, or
must I fear to lose data when trying to restore from this archive?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Knowledge, sir, should be free to all
during my full backups, so it's easily
reproducible for me.
So let's remember that fact, too.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Open the pod bay doors
run my backups manually, but the next scheduled run
will fail with the same errors.
Any ideas?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
The universe
idle?
Why cannot we close and reopen when needed?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Do not underestimate the value of print statements for debugging
and then type a list volumes or any other command accessing the
database in the console.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
If I had to live my life again, I'd
data: 6st0: Current: sense key: Unit Attention
Additional sense: Power on, reset, or bus device reset occurred
???
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL
: Wolfgang Denk [EMAIL PROTECTED]
Date: Mon, 13 Mar 2006 13:00:57 +0100
and
Subject: [Bacula-users] tape writing error in bacula
From: david robert [EMAIL PROTECTED]
Date: Fri, 17 Mar 2006 09:30:52 + (GMT)
No, I didn't find any of these messages. However, at the time
issue in
the SCSI tape driver layer.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Plan to throw one away. You will anyway.
- Fred
In message [EMAIL PROTECTED] you wrote:
I am more and more convinced that this is a subtel timing issue in
the SCSI tape driver layer.
Do you think it could be an overrun situation?
Overrun of what?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime
different systems with different
cables, terminators, drives, etc. And only with bacula, when writing
without spooling.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED
), or it overran the SCSI command queue.
I will try to run some tests...
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
...this does not mean that some of us should
regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
I can call spirits from the vasty deep.
Why so can I, or so can any man; but will they come when you do call
for them
,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
What's the sound a name makes when it's dropped?
---
Using Tomcat but need to do more
.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Today is the yesterday you worried about tomorrow.
---
Using
not be able to put this information to use.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
What the scientists have in their briefcases is terrifying.
- Nikita
. The SF people hope that the new
version might fix all the mailing list problems they have, and had -
again and again. We've seen lng delays on several mailing lists.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142
in the future?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
I express preference for a chronological sequence of events which
precludes a violence. - Terry
to Munich this summer?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
If there was anything that depressed him more than his own cynicism,
it was that quite often it still
in the same direcotry
where the volumes are stored result in the expected no space left
errors.
May I re-ask:
BTW: are you still planning for a trip to Munich this summer?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49
options to the given value,
0.
So stsetoptions will leave any options set to 1 unchanged, while
stoptions will reset thtese to zero.
Small difference in typing, big difference in effect.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
data while the first one is blocked while spooled data is
written to tape. The number of jobs you need obviously depends on how
quickly you can collect and spool data, and on the speed of your tape
drive.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems
the shoe shining.
It's not only the network speed which plays a role, but also the
speed of the bacula client collecting the data. Especially when
running incremental backups on large partitions with little changes,
data can trickle pretty slowly.
Best regards,
Wolfgang Denk
--
Software
regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
When the ax entered the forest, the trees said, The handle is one of
us! -- Turkish
regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
...all the good computer designs are bootlegged; the formally
planned products, if they are built at all, are dogs
Hi,
has anybody any plugins available for monitoring bacula status
under munin?
Thanks in advance.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
For every
, even using the same disk sizes, raid configuration and
RAID controller. And I see the same thing, and I measured that we
spend most time in iowait. See my previous posting.
Also, I can confirm that other setups (no RAID, no 3ware controllers)
behave differently.
Best regards,
Wolfgang Denk
Priority Project Number
=
11
23
36
4 25
5 18
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80
In message [EMAIL PROTECTED] you wrote:
Implementing a disk to disk to tape setup would be the other choice, now
that 2.0 is out.
Is there some example for such a configuration available somewhere?
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems
regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Doubt is a pain too lonely to know that faith is his twin brother.
- Kahlil Gibran
=...
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office: Kirchenstr. 5, D-82194 Groebenzell,Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Put your Nose to the Grindstone
are not web browsers.
verified belief is that newbies presented with a choice of forum
versus e-mail list will choose the forum.
You are probably right. That's because they don't know it better.
Most experts decide the other way.
Best regards,
Wolfgang Denk
--
DENX Software Engineering
.) about new features in 1.40.0, so can I assume that
this problem has been fixed for the 2.x releases?
Thanks in advance.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone
sure that you built your FD running on the 64 bit machine in
64bit mode?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80
}
(This assumes you use the pool names FULL, DIFF and INCR, resp.)
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL
the problem.
Is my interpretation correct that only the SD is affected, i. e.
there is no need to touch the DIR and FD? So most clients which just
run the FD need no patching?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich
frequently find myself in the position that I need to restore some
file which is not listed any more in the catalog. I am usually pretty
happy then to be able to restore a N months old copy so I need only
two steps.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang
Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [EMAIL PROTECTED]
Horses just naturally have mohawk haircuts
the difference in how tar writes to tape versus how btape
writes to tape.
This is a misinterpretation.
The physical *tape* block size or record size is a multiple of the 512
byte block size, as determined by the '-b' resp. '--blocking-factor'
option.
Best regards,
Wolfgang Denk
--
DENX Software
to reference slot 4.
Catalog record for Volume K-Q-9 updated to reference slot 5.
Catalog record for Volume K-S-0 updated to reference slot 6.
Catalog record for Volume K-S-1 updated to reference slot 7.
Hope this helps...
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD
: disable it) in the
Run statements in the schedule.
However, how can I do the same when running a job manually using the
run command on the console?
It seems there is no option to enable or disable spooling then?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD
(that does not
perform other services which would utilize the CPU) s/w RAID gives
much better performance - at least in the usage szenarios we see
(which means serving a *big* number of relatively small files).
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang
?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Prediction is very difficult, especially of the future
: disable it) in the
Run statements in the schedule.
However, how can I do the same when running a job manually using the
run command on the console?
It seems there is no option to enable or disable spooling then? Or am
I missing something?
Best regards,
Wolfgang Denk
--
DENX Software
-changer completes normally, but I will test this.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Vulcans
that value).
getconf _NPROCESSORS_ONLN (respective the equivalent C code) might
be a good start.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax
Item 1: Enable/disable spooling when starting jobs with run
Date: Mon Feb 9 00:41:01 CET 2009
Origin: Wolfgang Denk w...@denx.de
Status:
What: I would like to be able to override the spooling settings
of a job when manually starting it using run.
Why:Normally we
; it
thus is part in the most recent 2.5 beta releases and will be part of the
upcoming 3.0 release.
Ah, cool. Thanks for the information.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194
,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
A person with one watch knows what time it is; a person
-001
ABV102 I-002
ABV103 I-003
ABV104 I-004
ABV105 I-005
ABV106 I-006
...
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989
?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
READ THIS BEFORE OPENING PACKAGE: According to Certain
efficient.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
There is a time in the tides of men, Which
-password=bacula23 \
--with-mon-fd-password=bacula23 \
--with-mon-sd-password=bacula23 \
--with-db-name=bacula \
--with-db-user=bacula \
You want to use MySQL, so you should add (at least) --with-mysql
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev
autoloaders are extremely picky
and require a special high-reflective material (all my attempts to use
self-printed labels failed so far), but in this case this looks not so
difficult. You know GNU Barcode ?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev
hand, I don't want to job to stall until Monday when the tape
finally fills up.
If it was possible to signal a tape full condition, I could enforce
the insertion of a new magazine.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235
/firewall/mysql/archive/sdw_netflow/netflow_20100430.tar
on that system show? Is there any chance that this is a sparse file
with (big) holes (eventually even unintentionally, like after some
error in a RAID)?
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk
that this might be a sparse file (eventually
unintentionally, like after disk errors) and you consume the time
compressing a zillion of null bytes or similar.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194
,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Emotions are alien to me. I'm a scientist.
-- Spock, This Side
will write in 63 KiB blocks, so you should never need that
much.
What does your /etc/stinit.def look like? [Or where else do you
configure your tape driver to use such buffers?]
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich
-common-5.0.3-13.fc16.x86_64
bacula-storage-mysql-5.0.3-13.fc16.x86_64
Anything ales I could look for?
Thanks in advance.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell
that, but I could not see any.
The log file is available here: ftp://ftp.denx.de/pub/tmp/log.gz
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10
to solve that.
I understand the problem is located, and no further testing on my side
is needed?
Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989
regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
This restaurant was advertising breakfast any time. So I
on the impacted hosts
Yes, I do have some of these, too. But these are easy to spot as they
don't accept larger MTU's:
# ifconfig eth0 mtu 9000
SIOCSIFMTU: Invalid argument
# ifconfig eth0 mtu 7200
#
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
Dear Frank Sweetser,
In message 4f0722a4.5090...@wpi.edu you wrote:
Are all of the machines on the same subnet? If not, you'll also have to check
the MTU on all of your local router interfaces.
Yes, they are all in the same net, and all on the same switch.
Best regards,
Wolfgang Denk
the advice.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
An expert is a person who avoids the small
is something
that involves the DIR and the SD only, so it should not block the
client from starting the next backup job.
Seems I'm missing something here. Any ideas are highly welcome.
Thanks in advance.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev
Dear John Drescher,
In message CAEhu1-7L0Q=jNQqBf_d_5VPaRHxsNKN-Szh7Zh_h=nk8op-...@mail.gmail.com
you wrote:
Do you have any restrictions on how many jobs go per volume?
No.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235
that?
All these jobs use the same pool, so both jobs and thus both clients
will use the same volume. There are other jobs running in parallel,
too (but not as many as to run into the max job limit).
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev
and DIR
are still processing this job.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
An open mind has
a limitation.
[Yes, I am aware that the Adaptec 2940 is not exactly new. But I
should get more than 8.8 MB/s out of it, should I not?]
Any help welcome. Thanks in advance.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office
my suspicion that I should start by
replacing the SCSI adapter.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w
that this should be chosenin the 1024 ... 2048 KiB
range.
With this setup I get now sustained data rates of 55...59 MiB/sec for
uncompressible data, and data rates varying between 80...140 MiB/sec
for compressible data.
Thanks!
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk
on the console command line?
Any help welcome, thanks in advance.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w
'
# Spool Data to disk before writing to tape
Spool Directory = /backup/spool
Maximum Spool Size = 5120GB
Maximum Job Spool Size = 5120GB
}
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194
1 - 100 of 169 matches
Mail list logo