og upgrade is triggered by some packages
on some platforms, and it's always an interesting discussion if that is
reasonable or incorrect. There is no solution that is correct for
everybody, I fear.
Cheers,
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080
.
Cheers,
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists
n was that you could access the
drive thingies using WebDAV, which would allow for a pretty lean
solution to back up *from* them.
Cheers,
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
___
Bacula-users mailing list
Bacula-users@l
to do the micro management. You
care about the big picture :-)
Cheers,
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo
ust too time consuming (for me at
least...)
Good luck!
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
an impression.
You can find a somewhat official notice here:
https://lists.denx.de/pipermail/u-boot/2022-October/497955.html
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
___
Bacula-users mailing list
Bacula-users
of Jobs per Volume, with a maximum Volume size of 5GB.
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Download Intel#174; Parallel Studio Eval
Try the new software tools for yourself
explain, what's really going wrong and how to avoid that?
Best regards,
Peter
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Download Intel#174; Parallel Studio Eval
Try
Hi,
06.03.2010 18:46, Peter Allgeyer wrote:
Hi Arno!
Am Samstag, den 06.03.2010, 14:00 +0100 schrieb Arno Lehmann:
I'm guessing that you're running an USB or (less likely, but still
possible) FireWire external disk. If that's the case, you probably
struck a bad USB-to-(S)ATA controller
this in a blog post).
Thanks for bringing this to our attention!
Arno
http://code.google.com/p/baculafs/
- Exposes the Bacula catalog and storage as a Filesystem in USErspace
I've heard FUSE mentioned here before.
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its
and the SD's device configuration.
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Download Intel#174; Parallel Studio Eval
Try the new software tools for yourself. Speed
Hello,
27.02.2010 19:08, Stan Meier wrote:
* Arno Lehmann a...@its-lehmann.de:
27.02.2010 14:46, Stan Meier wrote:
1. Keeping configuration sane: With more than 120 servers, we need to
find a way to keep the configuration files readable. Our servers all
follow some naming scheme, for example
strategy?
Yes. Properly set up, that's a very reasonable approach. You'll need
to understand retention times and how to select jobs for migration in
detail.
Cheers,
Arno
Any hints on this would be very appreciated.
Stan
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
Hi,
--- Originalnachricht ---
Von: Ralf Gross ralf-li...@ralfgross.de
An: bacula-users@lists.sourceforge.net
Gesendet: 23.2.10, 23.02
Betreff: Re: [Bacula-users] Can't restore a file. Might have an issuewith
my mysql DB.
Arno Lehmann schrieb:
Hello,
23.02.2010 14:05
.
Enter done to leave this mode.
cwd is: /
$
0 Files
Ever tried the 'ls' or 'dir' command here, at the $ prompt?
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Download
@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Download Intel#174; Parallel Studio Eval
Try the new software tools
mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Download Intelreg; Parallel
Hi,
17.02.2010 22:29, Bob Hetzel wrote:
From: Arno Lehmann a...@its-lehmann.de
Subject: Re:
To: bacula-users@lists.sourceforge.net
Message-ID: 4b7bc766.4040...@its-lehmann.de
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Hi,
16.02.2010 16:48, Bob Hetzel wrote:
Last year
..
On Tue, 16 Feb 2010, Arno Lehmann wrote:
Hi,
16.02.2010 11:50, Daniel Kamm wrote:
That's maybe a stupid question, but I really wonder...
Using Disk Spooling prior to write data to tape, heads in a sequential
write order:
a) write data from backup client to disk spool directory
b) write data
schrieb Arno Lehmann:
Hi,
15.02.2010 15:32, Torsten Maus wrote:
Hey guys,
I have a problem, I installed bacula 5.0 on da fresh machine (fresh Mysql
Server)
My Systems looks like:
- debian lenny
- Mysql 5.0
- Bacula 5.0
When I start a backup, the bacula service automated label volumes
- hopefully - be handled by the normal backup and
system state backup. The Metabase... well, I don't even know what
that's good for, but seeing that you can force that to exist as
regular files is already good!
Cheers,
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW
are not remembered by Bacula - if you need those, you pot
them in /etc/fstab :-)
What happens on Windows is all a big miracle to me, so I can't tell
you much regarding that.
Cheers,
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
Hi,
16.02.2010 12:49, Silver Salonen wrote:
On Wednesday 03 February 2010 10:35:22 Arno Lehmann wrote:
You find it in the example subtree of the source code - I would
recommend to use 5.0 source to built it, since it's included in the
./configure routine, which makes creating it much easier
Hi,
16.02.2010 13:33, Silver Salonen wrote:
On Wednesday 03 February 2010 10:35:22 Arno Lehmann wrote:
check_bacula *should* work with all Bacula versions, though I admit I
heven't trsted on anything except 3.0 and development versions shortly
before 5.0.
If you've got more questions
/solaris-dev2dev
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW
way to spend lots of time for windows admins
thinking about backup and recovery ;-)
Not really being a windows admin myself and needing that stuff makes
me spend even more time with it...
Thanks for your insight!
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its
http://p.sf.net/sfu/solaris-dev2dev
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
/Testing_Your_Tape_Drive.html
Cheers,
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
SOLARIS
@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
SOLARIS 10 is the OS for Data Centers - provides features
startBackupFile, cmd =
exchange:/@EXCHANGE/Microsoft Information Store
nasex-fd: storage_group_node.c:65-2590 startBackupNode_STORAGE_GROUP
state = 1, name = First Storage Group
nasex-fd: storage_group_node.c:97-2590 No specific database specified -
backing them all up
--
Arno Lehmann
IT-Service Lehmann
at all :-)
Arno
Thanks in Advance
KP:working:
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
The Planet: dedicated and managed hosting, cloud storage, colocation
Stay online
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
The Planet
://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
The Planet: dedicated and managed hosting, cloud storage, colocation
Stay online with enterprise
Hi,
26.01.2010 23:25, Daniel wrote:
Arno,
On 26 Jan, 2010, at 15:21 , Arno Lehmann wrote:
Hi,
26.01.2010 18:05, Daniel wrote:
I have the following situation:
I am backing up a Windows hard disk (let's call it R: for
remote)... it is NOT the C: drive on the remote host. I wish
/sfu/theplanet-com
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service
list Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
The Planet: dedicated and managed
-bits Windows to me.
Can anyone report success?
Yes, lots of successes.
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Throughout its 18-year history, RSA Conference
that helps,
Arno
Thanks!
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest
/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest in the field
Hello,
19.01.2010 10:19, Cyril Lavier wrote:
Cyril Lavier wrote:
Dan Langille wrote:
Arno Lehmann wrote:
Hello,
18.01.2010 15:21, Cyril Lavier wrote:
Hi.
I read the documentation about the FileSet configuration, but I have
some problems doing a correct
Hi, again,
this is the solution. It's actually simple - a bit of though and voilà...
19.01.2010 10:35, Arno Lehmann wrote:
Hello,
19.01.2010 10:19, Cyril Lavier wrote:
Cyril Lavier wrote:
Dan Langille wrote:
Arno Lehmann wrote:
18.01.2010 15:21, Cyril Lavier wrote:
...
I need
Hi,
19.01.2010 11:05, Cyril Lavier wrote:
Arno Lehmann wrote:
Hi, again,
this is the solution. It's actually simple - a bit of though and voilà...
19.01.2010 10:35, Arno Lehmann wrote:
Hello,
19.01.2010 10:19, Cyril Lavier wrote:
Cyril Lavier wrote:
Dan Langille wrote
that, good luck!
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest in the field
luck!
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Throughout its 18-year history, RSA Conference consistently attracts the
world's best and brightest in the field, creating
at work late :-)
Arno
TIA
Cheers
Glyn
Arno Lehmann wrote:
Hello,
15.01.2010 08:25, Glyn wrote:
Using 3.0.2 on Ubuntu 8.04 server with MySQL.
It is now Friday of the 2nd week of January so the schedule A with Pool
A should be used, I would have thought. However, this morning at 9:05
Hello,
and sorry for replying so late... I've been busy with lots of other
things.
20.12.2009 11:44, Oliver Lehmann wrote:
Arno Lehmann wrote:
This happens, as far as I can see, only with external drives (USB in
your and other cases, FireWire here), so I attribute it to imperfect
found in the last Options resource.
As a consequence, if you want a particular set of default options,
you should put them in an Options resource after any other Options.
That should explain what you see...
Cheers,
Arno
I use bacula 2.4.4 on a Debian Lenny 64bits server.
Thanks.
--
Arno
1st, 3rd, 5th mon-fri at 09:10
}
Schedule {
Name = DayTimeAfterBackupA
Run = Full 2nd, 4th mon-fri at 09:10
}
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Throughout
4 status unknown.
And I excluded disk volumes from query 15...
Does that help?
Arno
2009/12/18 Arno Lehmann a...@its-lehmann.de:
Hello,
17.12.2009 14:41, John Drescher wrote:
is there any sample config for using a virtual tape library storing
files on disk out there?
There is vchanger
unknown.
Lots of slots to manage, which makes using bconsole a bit hard, but
there's always BAT :-)
Cheers,
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
This SF.Net email
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
parameters on file
configuration and run update pool on bconsole, could that the source
of this problem?
I don't think so.
I would suggest to just set this volume to status Used and let the
normal recycling routine do its work.
Cheers,
Arno
Thanks in advance!
--
Arno Lehmann
IT-Service
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
This SF.Net
from a different pool. Should work, though I haven't
tested it yet.
Arno
I'm using bacula 3.0.2
Thanks
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Join us December 9, 2009
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Join us December 9, 2009 for the Red Hat Virtual Experience,
a free event focused on virtualization and cloud computing.
Attend
Hello,
03.12.2009 07:08, Jens Froehlich wrote:
Arno Lehmann schrieb:
...
Looks all very good.
I would try dd'ing some random data to tape next.
Running sar or, at least, vmstat and top during testing and a slow
backup might reveal some unexpected bottlenecks.
Also, it's important
://bugs.bacula.org/view.php?id=1428
Also, this has been discussed recently, either here or on -devel. You
might want to search the archives for more information.
Cheers,
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Join us December 9, 2009 for the Red Hat Virtual Experience,
a free
Hello,
02.12.2009 07:23, Jens Froehlich wrote:
Arno Lehmann schrieb:
Hello,
and welcome!
30.11.2009 13:21, Jens Froehlich wrote:
Hi bacula-users,
I has a problem with my Bacula (3.0.2) installation on OpenSuSE 11.1
(32Bit). The LTO-1 tapes are described only a half, nevertheless
separate jos would be reasonable).
Cheers,
Arno
I would be happy if anybody has an idea how to solve this problem.
Thanks,
Dietrich
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
Hello,
02.12.2009 15:17, Clark Hartness wrote:
Hi Arno,
-Original Message-
From: Arno Lehmann [mailto:a...@its-lehmann.de]
Sent: Wednesday, December 02, 2009 4:19 AM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Is it possible to Set a Job Level
, The host machine is Fedora 11 x64. I have been running Bacula 2.4.4 on
this machine without issue for months but need to upgrade
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Join us
@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Join us December 9, 2009 for the Red Hat Virtual Experience
could run your script from a RunScript resource in
the Job.
Arno
TIA Clark
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Join us December 9, 2009 for the Red Hat Virtual
?
By Jens
Sorry for my bad English :-(
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify
new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
___
Bacula-devel mailing list
bacula-de...@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-devel
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
Maximum Concurrent Jobs = 20
}
That should be all that's required.
Cheers,
Arno
-
Juergen Koch
Arno Lehmann schrieb:
Hello,
26.11.2009 16:31, Juergen Koch wrote:
I use a autochanger with bacula on debian/lenny.
The changer has two drives and I can load tapes into the drives using
scheduling
restore jobs doesn't work very well...
To get integrated into Baculas scheduling, you could run your script
as a run script inside Bacula... for example, to run after the
successful verify job.
Cheers,
Arno
Best,
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment
Hi,
26.11.2009 09:45, Sascha Retzki wrote:
Arno Lehmann wrote:
Hi,
25.11.2009 14:20, Sascha Retzki wrote:
Hello List,
I've got a best practice question. When a Job is started it changes
to Status=Running and the FD tries to connect to the SD. Let's assume
this fails due to network
; dbpassword = bacula
#125;
No, that way works here (and has done for years), so I'm pretty sure
it's not the problem.
What was the original question? I don't find it in my mail...
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
:20
Run = Level=Differential 2nd-5th tue at 8:25
Run = Level=Incremental sun,mon,wed-sat at 8:25
}
Pool {
Name = DiskLong
Storage = FileCh
...
}
Pool {
Name = DiskShort
Storage = File3Ch
...
}
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080
@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Let Crystal Reports handle the reporting - Free
Hello,
26.11.2009 14:02, Christoph Litauer wrote:
Arno Lehmann schrieb:
...
Please post the result. Thanks in advance!
Sure...
mysql EXPLAIN SELECT Path.Path, Filename.Name, File.FileIndex, File.JobId,
File.LStat FROM ( SELECT max(FileId) as FileId, PathId, FilenameId FROM (
SELECT
(Drive Index = 1)
any hints?
is this a bug in the mount-command?
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Let Crystal Reports handle the reporting - Free Crystal Reports
the other jobs are succeeding regardlessly ;-)
Soo, give me your best practice advice, or tell me if I just did
something wrong with teh configuration and I am on the wrong track!
Thanks in advance, Sascha
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its
, too :-)
Cheers,
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design
. Possible causes:
Passwords or names not the same or
Maximum Concurrent Jobs exceeded on the FD or
FD networking messed up (restart daemon).
Please see http://www.bacula.org/rel-manual/faq.html#AuthorizationErrors
for help.
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
rows in set (6.99 secs)
This is a MyISAM catalog with 14776513 Files, 1163114 FileNames, and
198492 Paths. Machine is a Dual-Core Opteron with 2GB RAM and a decent
disk subsystem. MySQL is not exactly configured for maximum performance.
Hope this helps you,
Arno
--
Arno Lehmann
IT-Service
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
-july
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
://p.sf.net/sfu/bobj-july
___ Bacula-users
mailing list Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify
for various scenarios.
If the above patch is okay then things become much simpler.
Regards,
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Let Crystal Reports handle the reporting
, since I won't
have partially filled USED tapes throughout my library.
Regards,
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Let Crystal Reports handle the reporting - Free
Hello,
17.11.2009 02:48, Jerome Alet wrote:
Hi again,
On Tue, Nov 17, 2009 at 02:09:03AM +0100, Arno Lehmann wrote:
17.11.2009 00:49, Jerome Alet wrote:
On Mon, Nov 16, 2009 at 02:35:12PM +1100, Jerome Alet wrote:
...
But during restore, what happens is that only volumes configured
coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr
://p.sf.net/sfu/bobj-july
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6
/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need
James Harper schrieb:
Arno Lehmann schrieb:
30.10.2009 07:24, Leslie Rhorer wrote:
2. Span multiple target drives
Sure.
I'm not sure if he might has thought of a single backup job
spanning
multiple drives.
This wouldn't be possible AFAIK.
It should work afaict. It certainly works
-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year
@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
--
Come build with us! The BlackBerry(R) Developer Conference in SF
device:
# mt -f /dev/st0 rewind
# mt -f /dev/st0 weof
Once you restart bacula, you should be able to write a new tape
label.
Alternatively, 'add' the volume using bconsole, then 'relabel' it.
Arno
HTH Uwe
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its
1 - 100 of 2393 matches
Mail list logo