[Bacula-users] I'm searching for MSL6030 snmp mib
Hi at all, I'm trying to monitor our old HP MSL6030 (rebranded Overland 6000) tapelibrary. Due to these libraries are quite old, we cannot find the Mib specs. Can someone help us? Thanks in advance. Simone -- 01010011 01011001 01010011 Skylogic a EutelSat Company -- -- Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Problem with a volume: unable to solve
Good evening, I got a problem with an old Bacula 5.2.5 (26 January 2012) i686-pc-linux-gnu redhat. Sometimes, during week-end differential backups I got a fail with mysql dump job: 25-Apr 05:10 backup.lan-sd JobId 22026: Error: block.c:577 Write error at 0:0 on device "Drive-1" (/dev/st1). ERR=Bad file descriptor. 25-Apr 05:10 backup.lan-sd JobId 22026: Error: Error writing final EOF to tape. This Volume may not be readable. dev.c:1551 ioctl MTWEOF error on "Drive-1" (/dev/st1). ERR=Bad file descriptor. 25-Apr 05:10 backup.lan-dir JobId 22026: Fatal error: Volume Files at 88 being set to 0 for Volume "GJ8634L5". This is incorrect. 25-Apr 05:10 backup.lan-sd JobId 22026: Fatal error: Error getting Volume info: 1992 Update Media error. VolFiles=0, CatFiles=88 With the same mysql backup we run succesfully other jobs saving simple files without beforescripts. These jobs terminated correctly using the same GJ8634L5 LTO-5 tape, so I believe is not a problem with the tape. Have you ever seen a similar prbolem? Thanks in adavance for attention and sorry for my poor english. Simone Martina -- 01010011 01011001 01010011 Skylogic a EutelSat Company -- This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. No employee or agent is authorized to conclude any binding agreement on behalf of this Company nor, through this latter, any of the Eutelsat Communication group with another party by email without express written confirmation by a duly authorized officer of the Company. The list of duly authorized officers and the scope of their powers is published on the Trade Register according to the national law of each affiliate. -- One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] problem with MSL4048
Hi at all, since two weeks I got problem with my HP MSL4048, a two reader library connected by SAS to my Centos 5 (32bit) Bacula server. Randomly the s.o. is not able to see the library, but this one return no error (on the web managemente): the only signs of problem could be seen into dmesg output: cciss :13:00.0: unknown unit attention detected cciss :13:00.0: unknown unit attention detected cciss :13:00.0: unknown unit attention detected Could indicating an error into SAS board? Anyone encountered the same error? This system runs correctly since two year... Thanks in advance for your attention, Simone -- 01010011 01011001 01010011 Skylogic a EutelSat Company -- This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. No employee or agent is authorized to conclude any binding agreement on behalf of this Company nor, through this latter, any of the Eutelsat Communication group with another party by email without express written confirmation by a duly authorized officer of the Company. The list of duly authorized officers and the scope of their powers is published on the Trade Register according to the national law of each affiliate. -- HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions Find What Matters Most in Your Big Data with HPCC Systems Open Source. Fast. Scalable. Simple. Ideal for Dirty Data. Leverages Graph Analysis for Fast Processing & Easy Data Exploration http://p.sf.net/sfu/hpccsystems ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Building directory tree for JobId(s) very slow
= 1 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash [isamchk] key_buffer = 256M sort_buffer_size = 256M read_buffer = 2M write_buffer = 2M [myisamchk] key_buffer = 256M sort_buffer_size = 256M read_buffer = 2M write_buffer = 2M [mysqlhotcopy] interactive-timeout [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I got an HP Proliant DL360 G5, 4 CPU, 6GB of RAM: this server runs bacula-dir, mysql and nothing else. Where's my mistake? Could you suggest me some optimization. Thanks in advance. Simone Martina -- 01010011 01011001 01010011 Skylogic a EutelSat Company -- This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the Company. No employee or agent is authorized to conclude any binding agreement on behalf of this Company nor, through this latter, any of the Eutelsat Communication group with another party by email without express written confirmation by a duly authorized officer of the Company. The list of duly authorized officers and the scope of their powers is published on the Trade Register according to the national law of each affiliate. -- Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Verify tape
Il 14/06/2012 16:29, Gandalf Corvotempesta ha scritto: > How can I verify the copy? Can I list the contents of my tapes? Maybe you can use bscan to scan the tape, the tool returns a DB resultset normally used to retrive tape content due to recover a pruned job. Simone -- Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Error building 5.2.2 client only
Good evening, I got some troubles building 5.2.2 client-only file deamon onto Centos 5.7 x86_64 server. I could rightly make a ./configure --with-dump-email=emailOperator@domain --with-smtp-host=IPaddressOfMailServer --with-job-email=emailoperator@domain \ --disable-readline --disable-build-dird --disable-build-stored --disable-conio --enable-client-only and a make, but when I lounched make install process stops installing make pages with these errors: gzip: //usr/share/man/man8/accept.8.gz already has .gz suffix -- unchanged gzip: //usr/share/man/man8/accton.8.gz already has .gz suffix -- unchanged gzip: //usr/share/man/man8/acpid.8.gz already has .gz suffix -- unchanged gzip: //usr/share/man/man8/acpi_listen.8.gz already has .gz suffix -- unchanged gzip: //usr/share/man/man8/addpart.8.gz already has .gz suffix -- unchanged gzip: //usr/share/man/man8/adduser.8.gz already has .gz suffix -- unchanged ... and so on until make: *** [install] Error 2 I could complete my installation voiding install: section into manpages's Makefile, but it is just a dirty workaround. There is something wrong into my system or is it a little bug? Regards, Simone Martina -- Cloud Services Checklist: Pricing and Packaging Optimization This white paper is intended to serve as a reference, checklist and point of discussion for anyone considering optimizing the pricing and packaging model of a cloud services business. Read Now! http://www.accelacomm.com/jaw/sfnl/114/51491232/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] MTX-Changer support list disappears
Good morning, I've to buy a new tape library and I've discovered that HP dismisses on July the well known MSL6030 (analog to Overland NEO 2000e). Our seller want's to sell us a HP MSL4048, but mtx-changer web site is offline and I could not see compatibility list: http://mtx.opensource-sw.net/compatibility.php Have some one tried an HP MSL4048 tape library with Bacula? Thanks for any suggestions, Simone -- Doing More with Less: The Next Generation Virtual Desktop What are the key obstacles that have prevented many mid-market businesses from deploying virtual desktops? How do next-generation virtual desktops provide companies an easier-to-deploy, easier-to-manage and more affordable virtual desktop model.http://www.accelacomm.com/jaw/sfnl/114/51426474/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] One SD two subnets
Goodevening,
I got a little problem: I have a bacula director on a server with two
NIC interfaces, each of one got a different subnet: 172.20.60.0/24 and
172.20.61.0/24 and I could only use a single LTO-4 tape reader.
Now, the problem is howto configure storage section in director
configuration file, because the differnt client (from the two nets)
should receive two different IP to contact SD.
Now I have tried this storage config:
Storage {
Name = TAPECORP
Address = 172.20.60.1
SDPort = 9103
Password = "foobar1"
Device = TAPE
Media Type = LTO-4
Maximum Concurrent Jobs = 20
}
Storage {
Name = TAPECUST
Address = 172.20.61.1
SDPort = 9103
Password = "foobar2"
Device = TAPE
Media Type = LTO-4
Maximum Concurrent Jobs = 20
}
172.20.60.1 and 172.20.61.1 are, respectively, the IPs of BaculaDIR/SD
for each net (DIR and SD are located onto the same physical server).
Is it the right way to configure it?
Thanks in advance for your suggestions,
Simone
--
BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA
The must-attend event for mobile developers. Connect with experts.
Get tools for creating Super Apps. See the latest technologies.
Sessions, hands-on labs, demos & much more. Register early & save!
http://p.sf.net/sfu/rim-blackberry-1
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Installing SD only
On 03/09/2011 02:28 PM, Bartłomiej Syryjczyk wrote: > Hi, > Is it possible to install storage daemon only from sources and in > this case is the MySQL is needed? > I've got director and catalog on different machine without connection to > tabe library, and want to install SD on another host. > Yes, if you lounch ./configure --help you can see that using --disable-build-dird --without-mysql you should compile only the storage deamon. Anyway, I'have not try this on my installations. Simone PS: Sorry, I've replied only to Bartłomiej Syryjczyk -- Colocation vs. Managed Hosting A question and answer guide to determining the best fit for your organization - today and in the future. http://p.sf.net/sfu/internap-sfd2d ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Problems compiling
On 02/25/2011 12:41 PM, Mathieu BALCERAK wrote: > Host: x86_64-unknown-linux-gnu -- debian wheezy/sid Have you installed all needed dev and header packages? Simone -- Free Software Download: Index, Search & Analyze Logs and other IT data in Real-Time with Splunk. Collect, index and harness all the fast moving IT data generated by your applications, servers and devices whether physical, virtual or in the cloud. Deliver compliance at lower cost and gain new business insights. http://p.sf.net/sfu/splunk-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] It's possible to parallelize backups?
Hi at all,
since some weeks I got a new SCSI controller due to use a second tape
reader into the HP MSL6030 (a Overland NEO 2000 clone) tape library.
After some initially troubles and a some telephonic shout with HP
support, now I'm able to use both internal reader (nst0 and nst1) and to
control the autocharger (sg1).
Actually I've defined two test pools: IncrWeek and WinIncrWeek. My goal
is to get two simultaneous backups from two different client onto two
tapes, one for each pool.
The problem is that, when a job start gets the first drive ([0])
meanwhile the second job wait for first terminating, to use the same drive.
I've attached my sd.conf and my storage section, where's wrong?
Thanks for you time,
Simone
== sd.conf =
Autochanger {
Name = tl2ch
Device = tl2drv1, tl2drv2
Changer Device = /dev/sg1
Changer Command = "/etc/bacula/mtx-changer %c %o %s %a %d"
}
Device {
Name = tl2drv1
Media Type = LTO-4
Drive Index = 0
Archive Device = /dev/nst1
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Changer Device = /dev/sg1
Autochanger = yes
Autoselect = yes
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
Spool Directory = /srv/baculaspool/drive1
Maximum Spool Size = 10G
Maximum File Size = 2G
Block Positioning = no
}
Device {
Name = tl2drv2
Media Type = LTO-4
Drive Index = 1
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
Changer Device = /dev/sg1
Autochanger = yes
Autoselect = yes
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
Spool Directory = /srv/baculaspool/drive2
Maximum Spool Size = 10G
Maximum File Size = 2G
Block Positioning = no
}
=== storage ===
# MSL6030 Autochanger
Storage {
Name = TL2CH
Address = 172.20.25.28# N.B. Use a fully qualified
name here
SDPort = 9103
Password = "password"
Device = tl2ch
Media Type = LTO-4
Autochanger = Yes
Maximum Concurrent Jobs = 20
}
# Internal drive1
Storage {
Name = TL2DRV1
Address = 172.20.25.28# N.B. Use a fully qualified
name here
SDPort = 9103
Password = "password"
Device = tl2srv1
Media Type = LTO-4
Maximum Concurrent Jobs = 20
}
# Internal drive2
Storage {
Name = TL2DRV2
Address = 172.20.25.28# N.B. Use a fully qualified
name here
SDPort = 9103
Password = "password"
Device = tl2srv2
Media Type = LTO-4
Maximum Concurrent Jobs = 20
}
--
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 security defects in the development cycle.
Locate bottlenecks in serial and parallel code that limit performance.
http://p.sf.net/sfu/intel-dev2devfeb
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] MSL6030: added a second tape reader -> problem
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi at all,
yesterday I've added a second LTO-4 ULTRIUM 1640 tape reader into my HP
MSL6030 SCSI tape library. I'm using Bacula 5.0.2 on Centos 5 x64.
I've updated my config in this way:
## bacula-sd.conf
Autochanger {
Name = "Autochanger"
Device = Drive-1, Drive-2
Changer Device = /dev/sg5
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
}
Device {
Name = Drive-1
Drive Index = 0
Media Type = LTO-4
Archive Device = /dev/nst1
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
# Maximum File Size = 5GB
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg5
AutoChanger = yes
Spool Directory = /srv/baculaspool
Maximum Spool Size = 50G
# Enable the Alert command only if you have the mtx package loaded
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
# If you have smartctl, enable this, it has more info than tapeinfo
Alert Command = "sh -c 'smartctl -H -l error %c'"
}
Device {
Name = Drive-2
Drive Index = 1
Media Type = LTO-4
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
# Maximum File Size = 5GB
Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg5
AutoChanger = yes
Spool Directory = /srv/baculaspool
Maximum Spool Size = 50G
# Enable the Alert command only if you have the mtx package loaded
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
# If you have smartctl, enable this, it has more info than tapeinfo
Alert Command = "sh -c 'smartctl -H -l error %c'"
}
##bacula-dir.conf (storage section):
# LTO-4 Storage
Storage {
Name = TAPE
Address = backup2.lan
SDPort = 9103
Password = "sdpassword"
Device = Drive-1
Media Type = LTO-4
Maximum Concurrent Jobs = 20
}
# LTO-4 Storage 2nd drive
Storage {
Name = TAPE2
Address = backup2.lan
SDPort = 9103
Password = "sdpassword"
Device = Drive-2
Media Type = LTO-4
Maximum Concurrent Jobs = 20
}
# MSL6030 Autochanger
Storage {
Name = MSL6000
Address = backup2.lan
SDPort = 9103
Password = "sdpassword"
Device = Autochanger
Media Type = LTO-4
Autochanger = Yes
Maximum Concurrent Jobs = 20
}
The old drive is Drive-1, meanwhile the new one is Drive-2. I've
connected both the library (/dev/sg5) than the two reader to the same
SCSI chain using 3 SCSI cables and an ending SCSI terminator.
The library is happy, but when I've tried to run a backup job, Bacula
choices the first tape (the old one): after 2 or 3 megabytes the job
fails with this messages:
01-Dec 12:41 backup2.lan-sd JobId 2032: Wrote label to prelabeled Volume
"NN6036L4" on device "Drive-1" (/dev/nst1)
01-Dec 12:41 backup2.lan-sd JobId 2032: Error: block.c:577 Write error
at 0:12 on device "Drive-1" (/dev/nst1). ERR=Input/output error.
01-Dec 12:42 backup2.lan-sd JobId 2032: Error: block.c:318 Volume data
error at 0:4294967295!
Block checksum mismatch in block=11 len=64512: calc=669ee9d3 blk=a7b18121
01-Dec 12:42 backup2.lan-sd JobId 2032: Error: Re-read last block at EOT
failed. ERR=block.c:318 Volume data error at 0:4294967295!
Block checksum mismatch in block=11 len=64512: calc=669ee9d3 blk=a7b18121
and tries to load a new tape from the same pool (incremental pool).
After used any of available tapes, Bacula request a new one but fails again.
Now I've cancelled all jobs and, after erased a tape, I've tried to run
a manual backup jobs forcing use the new tape reader: this jobs ends
successful!
Till yesterday morning I've always use the old reader without troubles,
but now I got this error into dmesg:
st1: Current: sense key: Aborted Command
Add. Sense: Information unit iuCRC error detected
INFO: task mt:19730 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mtD 810001587120 0 19730 7392
(NOTLB)
810027741cd8 0082 0001 810020ed2d68
81003efa5928 0007 81003c138080 81003ff3f080
0a275d268df9 3627 81003c138268 00028807aa5a
Call Trace:
[] wait_for_completion+0x79/0xa2
[] default_wake_function+0x0/0xe
[] :st:st_do_scsi+0x1f4/0x221
[] :st:st_int_ioctl+0x5f2/0x92b
[] __handle_mm_fault+0x5f3/0x1039
[] :st:st_ioctl+0xaa5/0xe1f
[] do_page_fault+0x4fe/0x874
[] do_ioctl+0x55/0x6b
[] vfs_ioctl+0x457/0x4b9
[] audit_syscall_entry+0x180/0x1b3
[] sys_ioctl+0x59/0x78
[] tracesys+0xd5/0xe0
Any suggestions?
Thanks,
Simone
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQEcBAEBAgAGBQJM9kzaAAoJEC9yUzzw9wFDjzsIAJBFXZ0iruR8tmksNzENBqJ1
2XnFLdK8Mcqt4s0udfhgqT5E/HAIVIeg3Yd8y4761Tw9HIfrczZxayM5C+PWWFMW
+w6oFAUrm2uSnBXr1t39m5Ye0Mz5dAlBVqs1/vUl7YB4d/uBCHQPi4qPp+S1/klU
FZS6
[Bacula-users] How to recover wrong overwritten tape?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi at all, this (sad) morning I've tried to append a job to a used volume (a tape): despite I've tried to update status, job retention and so on, Bacula marks that tape like purgeable and begin to write the new data on the beginning of the tape. When I see that situation, I've cancelled the jobs, but the damage was just done. Anyway, I've written only 45MB over 170GB of data. I've tried to use bscan and bls to read the tape, but only the last overwriting job is listed. How can I scan the whole tape and recover old, non overwritten, jobs? Thanks for any suggestions, Simone -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJMtYa1AAoJEC9yUzzw9wFDtwcIAJu4I38e8DvGSm8zzTP8bWBm 8a2stc5uS7+6qI3Z6bbA139JjcCRr9klU+cb1WuIIvfHtnqeeyDs11M3c26s9vEh 2AAqMD50aLxbgoO7JAzu7FnW4+DrnxOQ2SUvMk1VKcTGxDVcVEifJyuEmdwK45No 9zeBzP73x4D6pCW+UfRYsL+9CbJRBK4VMBiqbRJZ9/LQsGJoCnLuxIVKY5jZ1wxF HyPIikDI4y+/9IvkY1Bdxje6Vojz1ddWfThKwwsLymTvIcRu7LW8Tajo3UaHjeoH rmPg1ZN1MvfMVIvDjUpwukAO4Nn9hEhAGpP6Hpi6z8SJfzAvfLrSfBQQMOQL+QY= =rQUN -END PGP SIGNATURE- -- Beautiful is writing same markup. Internet Explorer 9 supports standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 & L3. Spend less time writing and rewriting code and more time creating great experiences on the web. Be a part of the beta today. http://p.sf.net/sfu/beautyoftheweb ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Trouble with regex fileset
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I'm trying to backup some folders from a server. I could list them from
bash with this command:
ls /ftpdir/linkstar/rncc??/burst/*.gz
But I wasn't able to write the right file set, I've tried in this way:
Include {
Options {
signature = MD5
compression=GZIP9
Wild = "*.gz"
}
File = /ftpdir/linkstar/rncc??/burst
}
and also in this one:
Include {
Options {
signature = MD5
compression=GZIP9
regex = "rncc[.][.]/burst/*.gz"
}
File = /ftpdir/linkstar/
}
But in the first manner Bacula couldn't find my files, in the second one
none file is selected.
I would like to save on backup only .gz files from subdirectories of
/ftpdir/linkstar/ wich begin with rncc and end witch two char
(alphanumeric non predictable).
Could you help me?
Many thanks.
Simone
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQEcBAEBAgAGBQJMqwrwAAoJEC9yUzzw9wFDf0sH/jznfiLrC5Bn4zqNChJL+CAQ
42xTEjV+yKR0AKEZrcDB7HD/j+IFoBUWsI8Xdhz+LwVIecFjivy/gtEkah+AfrgB
o9o++KanhWxHNPYTwYgc0u1HqGyZ7Ur2Etb5Gz+9ASc9O6P2GP6H/xOGgqXajH5+
XQX9+kT1gf4Hv62eOK6XdvSYUpQo54zGoDzdUGFu1LQfubfqG4QUJh6r+R6TmeOD
9z5FewJm1L7C1Kah/Fa/+WRXYdMmoS7dEmm9vvbIrqFjq5ZiC1OaKhIf0alRPGmj
oTokkg8hjjqXJsL1jlLsNKI5OjeXrMvKlX283LY+7AjONHJIownqmc+WOJgdvLk=
=zCow
-END PGP SIGNATURE-
--
Beautiful is writing same markup. Internet Explorer 9 supports
standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 & L3.
Spend less time writing and rewriting code and more time creating great
experiences on the web. Be a part of the beta today.
http://p.sf.net/sfu/beautyoftheweb
___
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Backup limited to 10% of network speed
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 09/16/2010 04:43 PM, John Drescher wrote: > No. Bacula does not throttle bandwidth. Are you using spooling? Do you > have millions of small files? Are the source disks highly fragmented? > Are we talking about full backups because any other level will spend a > large time finding what files to backup instead of just backing up > every file. Are you running "accurate" backups. Hi John, no, we have a vanilla installation of Bacula 5, we have not configure any spooling system and we don't use accurate option. Anyway we got heterogeneous behaviour between different server, so I would like to exclude Bacula from the list of possible cause of this low speed. Thanks, Simone -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJMkjXdAAoJEC9yUzzw9wFDQkYH/R9oc1D2cvJAi4jbfwOb8V/M Gzr5q2PDjrPqAWBCVH4PISlJV5a+7HEu36fE+R/zbhVH4O2NsGnXgDScR5QBBXS7 LNI/tQkETj3IcgC14Rpnfz57qMVmgSLHspwHr1WscJJfxsS5OGn9xjaaJ8il1/Wp cotyCjFOodx7GqFJS5Adk7iGyNcfNGtbutVY+isZQ55kGgXILznWbaJE44levB6X 2yI5CnIELYdnFs24zrkfVVLd4Y0kw9sHT0GD2ufW9JhD8lF06Na1G6xmRlyh0nK7 ALab5Iq/NaJ4zZPmbo31yE35fNnwqZRSEPdAzpj01sLUWKg+E0B+NMViXFs5L8s= =QFF7 -END PGP SIGNATURE- -- Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Backup limited to 10% of network speed
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi at all, I've noticed that our backup system keeps much time to finish servers' backup. Monitoring our 100Mbps net, by cacti, I see that backup speed run at 1MBps, at least, meanwhile on another 1000Mbps we could have a 10MBps backup. This condition is the same over many different machines, some behind router, other on the same net of backup server; we got the same result both with a HP StorageWorks single tape reader LTO-3 either on MSL6000 LTO4 Tape Library. I began to think that Bacula limit its transfer speed to 10% of network bandwidth: it's possible? Any suggestions will be appreciated, Simone -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJMkiiOAAoJEC9yUzzw9wFD/zMIALN0quoGHFYZghOLwsxIDniy sZ1+y9OIx+HIiVG84dVTf7MMZmDhZCAc9I/B+4ZPR5UoYIMXDDWo60brz5iYwNW1 gWogtFCbKnPHBoKNArHV6SUpNJ/yxNddcaHdGLbWR15sa2zxaUk6WNpQPvP426L9 pY/eCoMdEXNs70FgvaNevtGSPdfXLcRq0road6utQ7VbF4/jQMHEcb9d9ja3rzAj ugQ2OdhhS3Fx6hrasb6g3nLjg98TFJ8haDlBrAgTlSZdTiUMrG6+Bq54sv+8yMG8 1otLexEOPKNUoJBFmQdeZY9o+Kq/EnTzly1lxca/hwvRI7X7KZfzTt2j14bY/ik= =92ek -END PGP SIGNATURE- -- Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Limit backup speed
On 08/13/2010 05:59 PM, Alex Chekholko wrote: > On Fri, 13 Aug 2010 17:00:21 +0200 > Simone Martina wrote: > >>Hi at all, >> I got a trouble: a server of our server farm runs some perl scripts that >> are bad influenced by Bacula backup. >> Until our developers will return from holiday (damn), I need to limit >> bacula speed. >> Our servers are connected by 100Mbps ethernet network, should I tune >> Maximum Network Buffer Size parameter? >> > If you are running Linux, you probably want to use the tc command to > throttle traffic to the bacula port. > > Search Google for "linux tc throttle". Something like this: > http://www.cyberciti.biz/faq/linux-traffic-shaping-using-tc-to-control-http-traffic > > Regards, -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Limit backup speed
On 08/13/2010 05:59 PM, Alex Chekholko wrote: > If you are running Linux, you probably want to use the tc command to > throttle traffic to the bacula port. > > Search Google for "linux tc throttle". Something like this: > http://www.cyberciti.biz/faq/linux-traffic-shaping-using-tc-to-control-http-traffic > Thanks for your suggestion, but, despite I'm on Centos 5.5 x64, our firewall is disabled due to make simple server management (it's an internal system). I would hope there is a bacula parameter to tune file speed transfer... Simone -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Limit backup speed
Hi at all, I got a trouble: a server of our server farm runs some perl scripts that are bad influenced by Bacula backup. Until our developers will return from holiday (damn), I need to limit bacula speed. Our servers are connected by 100Mbps ethernet network, should I tune Maximum Network Buffer Size parameter? Thanks. Simone -- This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Two directors?
Hi at all, at the end of this year probably I will have to solve a trouble: my boss would like to have an adjunctive bacula director (and sd, tape-reader and so on) due to respect redundancy asset policy. Now, my Bacula contacts every db server to remotely dump mysql tables to make a backup of them. The problem comes when each director want to start a client side script: without a coordination system two jobs could dump the same db or, worser, clean a dump while another backup is running. There is not a coordination system between two directors? Thanks, Simone PS: My english becomes very bad, sorry. -- The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details: http://p.sf.net/sfu/dev2dev-palm ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] recycle volume
On 07/23/2010 06:45 PM, Jeremiah D. Jester wrote: I have a volume that I am recycling back into the pool before the volume expiration date. How do I simply wipe this tape or start the write position to the beginning of the tape to overwrite the old data? When I've to force recycling a tape, for first I delete it from the db (delete volume=yadayada...), then I umount the tape and out of bconsole I do: # mt -f /dev/nst0 weof Once the tape was erased, I re-login into bconsole and relabel the tape with the oldname (yadayada...). Not very elegant, but functional. Simone -- This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Fwd: How to limit DB growing
On 06/18/2010 05:41 PM, John Drescher wrote: > You are talking about mysql binary logs? > There is a command to purge these in mysql. > > John > > Yes, I've found a radical solution with mysql: truncate Log I would hope there were a inside Bacula way... doesn't matter, many thanks for your help. Simone -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Fwd: How to limit DB growing
On 06/18/2010 04:38 PM, John Drescher wrote: > run dbcheck > John > Thanks, I've just cleaned many orphaned entries, but I got just another problem: the Log tables (in mysql) is quite 30GB! :O dbcheck does not get a function to clear this data. Should I purge them manually? Simone -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] How to limit DB growing
Hi at all, my Bacula 5 system is still running since the beginning of February and now I've seen that the size of my mysql instance is grown to 30GB. My scheduled backups are so divided: - a full backup on Thursday, recycled every 4 weeks - a month full backup on the last Thursday of the month, never recycled (will buried in a hole till the end of world :-P) - a incremental backup every other day of the week recycling the tape every two weeks. I've noticed there is a prune (or maybe purge) parameter that permits to clean old datas from DB, could someone suggests a useful configuration? Thanks in advance, Simone PS: At the end, my boss order a MSL6030 from HP. I'm waiting for the monster :-P. -- ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] How to find all file .avi from full tape
Thanks for your suggestions, I propose a query made with help of a friend of mine: SELECT CONCAT(Path.Path,Filename.Name) FROM Filename Inner Join File ON Filename.FilenameId = File.FilenameId Inner Join Path ON File.PathId = Path.PathId where (Filename.Name LIKE "%avi") OR (Filename.Name LIKE "%AVI") OR (Filename.Name LIKE "%mpeg") OR (Filename.Name LIKE "%MPEG") OR (Filename.Name LIKE "%mpg") OR (Filename.Name LIKE "%MPG"); Now, I bring up the "reasoner" (http://wggw.bellobello.it/macek.jpg) and will go to talk to some of my collegues :-P. Simone -- ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] How to find all file .avi from full tape
Hi at all, someone of my colleagues tends to save non-work files (like large avi file) in shared directory and so my bacula backup Job take a lot of time due to save these unuseful rubbish... I would like to find full path of something file name contaings avi or AVI, has bconsole a sort of command for these type of query, or should I do a query directly to mysql? Thanks for your soggestions, Simone -- ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] I need to buy a Tape Library
Hi at all, my boss give me a budget of 20.000$ to buy a new tape library for our Bacula 5 server. I've tried to cross informations between MTX HCL (http://mtx.opensource-sw.net/compatibility.php?sorttype=1&start=1&count=0) and HP, our main supplier. From HP I've selected these libraries: http://h71016.www7.hp.com/dstore/ctoBases.asp?oi=E9CED&BEID=19701&SBLID=&ProductLineId=450&FamilyId=2244&LowBaseId=&LowPrice=&familyviewgroup=238&viewtype=Matrix&Matrix= because our goal is: - to have an autoloader system :-) - to be able to connect two director to the same library (a main Dir and a backup one for HA) - if possible, to have two tape reader in the library, due to make speediest search operations - we have to use Centos 5.4 x64, so the library needs to be compatible with it. Someone, from this ML, has bought a new tape library working with Linux and mtx-changer? Thanks for any suggestions. Simone -- ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Poor Performance
> -- Messaggio originale --- > Storage:"LTO4Driver" (From Job resource) > [...] > Rate: 6816.5 KB/s Aren't you using a TAPE to store your backup? IMHO, probably the speed is bottlenecked by the TAPE trasmission rate. Simone -- Chi ride ultimo ha fatto un backup. -- c...@cynic.wimsey.bc.ca (Curt Sampson) -- Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
