Hi,
both dd copies of barebox (with and without offset) reproduced a system which
no longer shows anything on the console.
Probably I setup something wrong when building barebox.
Regards
hu
> Hi Ahmad,
>
>>
>> Hello,
>>
>> On 1/23/20 4:30 PM, Hans-Ulrich Schlieben wrote:
>>> Hi Robert,
>>>
On 1/23/20 5:11 PM, Hans-Ulrich Schlieben wrote:
> Hi Ahmad,
>
>>
>> Hello,
>>
>> On 1/23/20 4:30 PM, Hans-Ulrich Schlieben wrote:
>>> Hi Robert,
>>>
>>> there where no SDK, bison and flex missing. Now it compiled. Thanx.
>>> There are
>>>
>>> Copying it onto the system and running it from the
Hi Ahmad,
>
> Hello,
>
> On 1/23/20 4:30 PM, Hans-Ulrich Schlieben wrote:
> > Hi Robert,
> >
> > there where no SDK, bison and flex missing. Now it compiled. Thanx.
> > There are
> >
> > Copying it onto the system and running it from the console just returned
> > error code 132 and:
> >
: Tuesday, 21 January 2020 21:21
To: Hans-Ulrich Schlieben ; Enrico Joerns
; yo...@lists.yoctoproject.org
Cc: barebox@lists.infradead.org
Subject: Re: [yocto] #yocto bootchooser: Cannot get state 'state'
Hi,
On 1/21/20 6:51 PM, Hans-Ulrich Schlieben wrote:
> Hi Ahmad,
>
> thank you for
Hello,
On 1/23/20 4:30 PM, Hans-Ulrich Schlieben wrote:
> Hi Robert,
>
> there where no SDK, bison and flex missing. Now it compiled. Thanx.
> There are
>
> Copying it onto the system and running it from the console just returned
> error code 132 and:
> Illegal instruction
Running what?
>
and Best Regards
hu
-Original Message-
From: Robert ber...@yocto.user
Sent: Wednesday, 22 January 2020 18:59
To: Hans-Ulrich Schlieben ; Ahmad Fatoum
; Enrico Joerns
Cc: yo...@lists.yoctoproject.org; barebox@lists.infradead.org
Subject: Re: [yocto] #yocto bootchooser: Cannot get state
Hi,
Did you install the SDK?
Did you run the environment script?
make: /path/to/your/yocto/toolchain/bin/arm--linux-gnueabihf-gcc: Kommando
nicht gefunden
LEX scripts/kconfig/lexer.lex.c
/bin/sh: 1: flex: not found
YACCscripts/kconfig/parser.tab.h
/bin/sh: 1: bison: not
ll try the upstream version.
>
> Thank you very much for your help.
>
> Best Regards
>
> hu
>
>> -Original Message-
>> From: Ahmad Fatoum
>> Sent: Monday, 20 January 2020 16:23
>> To: Hans-Ulrich Schlieben ; Enrico Joerns
>> ; yo...@lists.yoctopr
Hello Hans-Ulrich,
On 1/21/20 7:28 PM, Hans-Ulrich Schlieben wrote:
> Hi Ahmad,
>
>> git clone
>>
Hi Ahmad,
> git clone
>
From: Ahmad Fatoum
> Sent: Monday, 20 January 2020 16:23
> To: Hans-Ulrich Schlieben ; Enrico Joerns
> ; yo...@lists.yoctoproject.org
> Cc: barebox@lists.infradead.org
> Subject: Re: [yocto] #yocto bootchooser: Cannot get state 'state'
>
> Hello,
>
> On 1/16/20 4:09
Hello,
On 1/16/20 4:13 PM, Hans-Ulrich Schlieben wrote:
> Hi Enrico,
>
> thank you for your help and for telling me about fdtdump. Works great.
> I could not find any references to state in the device tree.
> There where no references to state and bootchooser in the devicetree.
> The only
Hello,
On 1/16/20 4:09 PM, Hans-Ulrich Schlieben wrote:
> Hi Ahmad,
>
> Thanks to your Mail I tested with barebox_2017.12.0-phy6.bb (thud used
> barebox_2017.12.0-phy4.bb) and this works in zeus too.
>
>> According to the state command output under thud, your state is stored on
>> the
-Original Message-
From: Enrico Joerns
Sent: Wednesday, 15 January 2020 15:48
To: Hans-Ulrich Schlieben
Cc: barebox@lists.infradead.org; yo...@lists.yoctoproject.org; Ahmad Fatoum
Subject: Re: [yocto] #yocto bootchooser: Cannot get state 'state'
On Wed, 2020-01-15 at
yo...@lists.yoctoproject.org
Cc: barebox@lists.infradead.org
Subject: Re: [yocto] #yocto bootchooser: Cannot get state 'state'
Hello Hans-Ulrich,
On 1/15/20 3:25 PM, Hans-Ulrich Schlieben wrote:
>> Can you copy the device tree snippet you use for defining state?
> Is there a problem because ubi works now a
if v2020.01.0 suffers from the same problem?
>
> Cheers
> Ahmad
>
> >
> > Thank you and Regards
> >
> > hu
> >
> >
> > -Original Message-
> > From: Ahmad Fatoum
> > Sent: Wednesday, 15 January 2020 14:40
> > To: Hans-Ulric
; Enrico Joerns
> ; yo...@lists.yoctoproject.org
> Cc: barebox@lists.infradead.org
> Subject: Re: [yocto] #yocto bootchooser: Cannot get state 'state'
>
> On 1/15/20 2:26 PM, Hans-Ulrich Schlieben wrote:
>> Hi Enrico,
>>
>> thank you very much for your help.
>> I'm using bar
om: Ahmad Fatoum
Sent: Wednesday, 15 January 2020 14:40
To: Hans-Ulrich Schlieben ; Enrico Joerns
; yo...@lists.yoctoproject.org
Cc: barebox@lists.infradead.org
Subject: Re: [yocto] #yocto bootchooser: Cannot get state 'state'
On 1/15/20 2:26 PM, Hans-Ulrich Schlieben wrote:
> Hi
nning the state command say?
(now again, but with CC-list intact)
>
> Thank you
> Regards
>
> hu
>
>> -Original Message-
>> From: Enrico Joerns
>> Sent: Wednesday, 15 January 2020 14:03
>> To: Hans-Ulrich Schlieben ;
>> yo...@lists
say?
> In thud this worked.
>
> Thank you
> Regards
>
> hu
>
>> -Original Message-
>> From: Enrico Joerns
>> Sent: Wednesday, 15 January 2020 14:03
>> To: Hans-Ulrich Schlieben ;
>> yo...@lists.yoctoproject.org
>> Cc: barebox@
etree and so on when moving to
warrior/zeus?
In thud this worked.
Thank you
Regards
hu
> -Original Message-
> From: Enrico Joerns
> Sent: Wednesday, 15 January 2020 14:03
> To: Hans-Ulrich Schlieben ;
> yo...@lists.yoctoproject.org
> Cc: barebox@lists.infradead.org
>
Hi,
this is mainly a barebox-related question, thus I'd suggest asking it
on the barebox ML.
[cc-ing barebox mailing list]
On Wed, 2020-01-15 at 04:10 -0800, hu.schlie...@codewrights.de wrote:
> Hi,
>
> booting the new yocto zeus system manually by "boot mmc" works fine
> but default
22 matches
Mail list logo