The DTS file for MBa6x is imx6q-mba6x.dts, so it looks like this file doesn't make any sense.
Signed-off-by: Robert Schwebel <r.schwe...@pengutronix.de> --- arch/arm/dts/imx6q-tqma6x.dts | 319 ------------------------------------------ 1 file changed, 319 deletions(-) delete mode 100644 arch/arm/dts/imx6q-tqma6x.dts diff --git a/arch/arm/dts/imx6q-tqma6x.dts b/arch/arm/dts/imx6q-tqma6x.dts deleted file mode 100644 index f556381..0000000 --- a/arch/arm/dts/imx6q-tqma6x.dts +++ /dev/null @@ -1,319 +0,0 @@ -/* - * Copyright 2013 Sascha Hauer, Pengutronix - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ -/dts-v1/; - -#include "imx6q.dtsi" - -/ { - model = "TQ TQMa6x"; - compatible = "tq,tqma6x", "fsl,imx6q"; - - chosen { - linux,stdout-path = "/soc/aips-bus@02100000/serial@021e8000"; - }; - - memory { - reg = <0x10000000 0x40000000>; - }; - - gpio_buttons: gpio_buttons@0 { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpiobuttons_1>; - - button@1 { - label = "button0"; - linux,code = <0x100>; - gpios = <&gpio7 13 0>; - }; - - button@2 { - label = "button1"; - linux,code = <0x101>; - gpios = <&gpio7 12 0>; - }; - - button@3 { - label = "button2"; - linux,code = <0x102>; - gpios = <&gpio1 8 0>; - }; - }; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can1_1>; - status = "okay"; -}; - -&can2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_can2_1>; - status = "okay"; -}; - -&ecspi1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi1_1>; - fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio3 19 0>; - status = "okay"; - - flash: m25p80@0 { - compatible = "m25p80"; - spi-max-frequency = <40000000>; - reg = <0>; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - status = "disabled"; -}; - -&hdmi { - status = "okay"; - ddc = <&i2c2>; -}; - -&i2c3 { - status = "okay"; - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_2>; - - pmic: pf0100@08 { - compatible = "pf0100-regulator"; - reg = <0x08>; - interrupt-parent = <&gpio6>; - interrupts = <10 8>; - - regulators { - reg_vddcore: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-always-on; - }; - - reg_vddsoc: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-always-on; - }; - - reg_gen_3v3: sw2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_ddr_1v5a: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-always-on; - }; - - reg_ddr_1v5b: sw3b { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-always-on; - }; - - reg_ddr_vtt: sw4 { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-always-on; - }; - - reg_5v_600mA: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - regulator-always-on; - }; - - reg_snvs_3v: vsnvs { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - reg_vrefddr: vrefddr { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - regulator-always-on; - }; - - reg_vgen1_1v5: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - /* not used */ - }; - - reg_vgen2_1v2_eth: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - regulator-always-on; - }; - - reg_vgen3_2v8: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_vgen4_1v8: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_vgen5_1v8_eth: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_vgen6_3v3: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - - sensor1: lm75@48 { - compatible = "lm75"; - reg = <0x48>; - }; - - sensor2: lm75@49 { - compatible = "lm75"; - reg = <0x49>; - }; - - eeprom: m24c64@50 { /* FIXME: Baseboard */ - compatible = "st,24c64", "at24"; - reg = <0x50>; - }; - -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - can1 { - pinctrl_can1_1: can1grp-1 { - fsl,pins = < - MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000 - MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000 - >; - }; - }; - - can2 { - pinctrl_can2_1: can2grp-1 { - fsl,pins = < - MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000 - MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000 - >; - }; - }; - - hog { - pinctrl_hog: hoggrp-1 { - fsl,pins = < - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 /* FEC phy reset */ - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* usdhc2 CD */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* usdhc2 WP */ - MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* eCSPI1 SS1 */ - MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x80000000 /* PMIC irq */ - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 - >; - }; - }; - - i2c3 { - pinctrl_i2c3_2: i2c3grp-2 { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; - }; - - uart2 { - pinctrl_uart2_2: uart2grp-2 { - fsl,pins = < - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - >; - }; - }; - - gpiobuttons { - pinctrl_gpiobuttons_1: gpiogrp-1 { - fsl,pins = < - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 - MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 - >; - }; - }; -}; - -&sata { - status = "okay"; -}; - -&uart2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_2>; -}; - -&usbh1 { - status = "okay"; - barebox,phy_type = "utmi"; - disable-over-current; -}; - -&usbotg { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - phy_type = "utmi"; - dr_mode = "host"; - disable-over-current; - otg_id_pin_select_change; - status = "okay"; -}; - -&usdhc2 { /* Baseboard Slot */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2_1>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; - max-frequency = <1000000>; - status = "okay"; -}; - -&usdhc3 { /* eMMC */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; - non-removable; - bus-width = <8>; - status = "disabled"; -}; -- 1.8.4.3 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
