Re: MFGTools from NXP

2019-10-18 Thread Ahmad Fatoum
Hello, On 10/17/19 10:40 AM, Mihaita Ivascu wrote: > Yes I have tried with 2019.01.0 barebox but no change. On linux I > cannot even connect with PUTTY even though /dev/ttyACM0 is present. On > Windows at least I can connect via PUTTY There's A Linux PuTTY client? Have you tried with a more

Re: MFGTools from NXP

2019-10-17 Thread Mihaita Ivascu
Yes I have tried with 2019.01.0 barebox but no change. On linux I cannot even connect with PUTTY even though /dev/ttyACM0 is present. On Windows at least I can connect via PUTTY On both OSes fastboot does not list any device. But the board is detected in device manager/dmesg. Best regards,

Re: MFGTools from NXP

2019-10-16 Thread Ahmad Fatoum
On 10/16/19 2:44 PM, Mihaita Ivascu wrote: > 2018.04.0 I've v2019.09.0 and did the same steps you described and it works for me. Can you try with a newer version? > > On Wed, Oct 16, 2019 at 2:41 PM Ahmad Fatoum wrote: >> >> On 10/16/19 2:35 PM, Mihaita Ivascu wrote: >>> No it does not. Still

Re: MFGTools from NXP

2019-10-16 Thread Mihaita Ivascu
2018.04.0 On Wed, Oct 16, 2019 at 2:41 PM Ahmad Fatoum wrote: > > On 10/16/19 2:35 PM, Mihaita Ivascu wrote: > > No it does not. Still no devices listed. > > Strange. What barebox version? > > > > > Thanks, > > Mihaita > > > > On Wed, Oct 16, 2019 at 1:36 PM Ahmad Fatoum > > wrote: > >>

Re: MFGTools from NXP

2019-10-16 Thread Ahmad Fatoum
On 10/16/19 2:35 PM, Mihaita Ivascu wrote: > No it does not. Still no devices listed. Strange. What barebox version? > > Thanks, > Mihaita > > On Wed, Oct 16, 2019 at 1:36 PM Ahmad Fatoum wrote: >> >> On 10/16/19 1:28 PM, Mihaita Ivascu wrote: >>> On Wed, Oct 16, 2019 at 11:53 AM Ahmad

Re: MFGTools from NXP

2019-10-16 Thread Mihaita Ivascu
No it does not. Still no devices listed. Thanks, Mihaita On Wed, Oct 16, 2019 at 1:36 PM Ahmad Fatoum wrote: > > On 10/16/19 1:28 PM, Mihaita Ivascu wrote: > > On Wed, Oct 16, 2019 at 11:53 AM Ahmad Fatoum > > wrote: > >> > >> > >> On 10/16/19 11:48 AM, Mihaita Ivascu wrote: > >>> On

Re: MFGTools from NXP

2019-10-16 Thread Ahmad Fatoum
On 10/16/19 1:28 PM, Mihaita Ivascu wrote: > On Wed, Oct 16, 2019 at 11:53 AM Ahmad Fatoum > wrote: >> >> >> On 10/16/19 11:48 AM, Mihaita Ivascu wrote: >>> On Wed, Oct 16, 2019 at 11:26 AM Ahmad Fatoum > wrote: On 10/16/19 11:21 AM, Mihaita Ivascu wrote: > Hello, > >

Re: MFGTools from NXP

2019-10-16 Thread Mihaita Ivascu
On Wed, Oct 16, 2019 at 11:53 AM Ahmad Fatoum wrote: > > > On 10/16/19 11:48 AM, Mihaita Ivascu wrote: > > On Wed, Oct 16, 2019 at 11:26 AM Ahmad Fatoum > > wrote: > >> > >> On 10/16/19 11:21 AM, Mihaita Ivascu wrote: > >>> Hello, > >>> > >>>Thanks for your answer. Yes i am able to connect

Re: MFGTools from NXP

2019-10-16 Thread Ahmad Fatoum
On 10/16/19 11:48 AM, Mihaita Ivascu wrote: > On Wed, Oct 16, 2019 at 11:26 AM Ahmad Fatoum wrote: >> >> On 10/16/19 11:21 AM, Mihaita Ivascu wrote: >>> Hello, >>> >>>Thanks for your answer. Yes i am able to connect via PUTTY to the target. >>>Then I should use some adb commands in

Re: MFGTools from NXP

2019-10-16 Thread Mihaita Ivascu
On Wed, Oct 16, 2019 at 11:26 AM Ahmad Fatoum wrote: > > On 10/16/19 11:21 AM, Mihaita Ivascu wrote: > > Hello, > > > >Thanks for your answer. Yes i am able to connect via PUTTY to the target. > >Then I should use some adb commands in order to push the new > > barebox/firmware ? do you

Re: MFGTools from NXP

2019-10-16 Thread Ahmad Fatoum
On 10/16/19 11:21 AM, Mihaita Ivascu wrote: > Hello, > >Thanks for your answer. Yes i am able to connect via PUTTY to the target. >Then I should use some adb commands in order to push the new > barebox/firmware ? do you know where I could find some examples? fastboot device -l works

Re: MFGTools from NXP

2019-10-16 Thread Mihaita Ivascu
Hello, Thanks for your answer. Yes i am able to connect via PUTTY to the target. Then I should use some adb commands in order to push the new barebox/firmware ? do you know where I could find some examples? Also I have a question: purpose of this activity is for me to be able to flash

Re: MFGTools from NXP

2019-10-16 Thread Ahmad Fatoum
On 10/16/19 10:40 AM, Mihaita Ivascu wrote: > Hello again, > >I have the target in otg peripheral mode, ADB and fastboot drivers > installed but fastboot does not list any device. The board is detected > in device manager Try enabling the ACM gadget in barebox and connect with PuTTY and see

Re: MFGTools from NXP

2019-10-16 Thread Mihaita Ivascu
Hello again, I have the target in otg peripheral mode, ADB and fastboot drivers installed but fastboot does not list any device. The board is detected in device manager Please see attachment. Any ideas how should I proceed? Thanks for the support. Thanks, Mihaita On Wed, Oct 16,

Re: MFGTools from NXP

2019-10-16 Thread Mihaita Ivascu
Thanks. I have installed ADB and fastboot drivers for Win from https://www.getdroidtips.com/how-to-install-adb-and-fastboot-on-windows/ I have installed according to the attachment. But is not recognized in Windows. I did reboot the system after installation but did not add any new env variable.

Re: MFGTools from NXP

2019-10-15 Thread Ahmad Fatoum
On 10/15/19 4:41 PM, Mihaita Ivascu wrote: > barebox@Phytec phyCORE-i.MX6 Ultra Lite SOM:/ fastboot devices -l That's what you run on your host system, not on the target. -- Pengutronix e.K. | | Industrial Linux Solutions |

Re: MFGTools from NXP

2019-10-15 Thread Mihaita Ivascu
Hello, Thanks for your link. I have tried and got to the step shown in the attachment. Looked here: https://www.barebox.org/doc/latest/user/usb.html#usb-gadget-autostart-support did not understand how to create and execute a script from the host. For me the imx6ul board must be in

Re: MFGTools from NXP

2019-10-15 Thread Ahmad Fatoum
Hello, On 10/15/19 4:07 PM, Mihaita Ivascu wrote: > Hello, > >does anyone have experience with using imx_usb_loader to flash the > barebox on a NAND(mtd partition)? If yes some reference scripts would > be helpful for me. Or where should I look for an example? Check out this thread:

Re: MFGTools from NXP

2019-10-15 Thread Mihaita Ivascu
Hello, does anyone have experience with using imx_usb_loader to flash the barebox on a NAND(mtd partition)? If yes some reference scripts would be helpful for me. Or where should I look for an example? Thanks, Mihaita Ivascu On Mon, Oct 14, 2019 at 3:07 PM Mihaita Ivascu wrote: > >

Re: MFGTools from NXP

2019-10-14 Thread Mihaita Ivascu
Hello all, Can I use imx-usb-loader tool from a windows host? I don't think so. If that is the case then I am stuck with MFGTools Thanks, Mihaita On Fri, Oct 11, 2019 at 11:47 AM Mihaita Ivascu wrote: > > Hello Marco, > >Thanks to your reply. I am not keen to use specifically

Re: MFGTools from NXP

2019-10-11 Thread Mihaita Ivascu
Hello Marco, Thanks to your reply. I am not keen to use specifically MFGTool but I do need a method to load flash new barebox and kernel images from windows side. I have tried with MFGTools but was not successfully when using kobs-ng to flash the barebox. I have attached a log that I send

Re: MFGTools from NXP

2019-10-11 Thread Marco Felsch
Hi Mihaita, On 19-10-10 15:03, Mihaita Ivascu wrote: > Hello all, > > Does anybody have experience with using MFGTools to flash the > barebox and kernel in NAND for imx6ul platforms? Hm.. I think the most of us are using the imx-usb-loader tool ;) I used it a long time ago but let's try if

MFGTools from NXP

2019-10-10 Thread Mihaita Ivascu
Hello all, Does anybody have experience with using MFGTools to flash the barebox and kernel in NAND for imx6ul platforms? Thanks, Mihaita ___ barebox mailing list barebox@lists.infradead.org