After reading through the mailing list archives I was able to learn that
I would need the latest CVS version in order to get my new Curve 8330 up
and working with Barry. I got all the -dev packages downloaded and barry
compiled just fine.
I went through the whole ./buildgen.sh, ./configure, and m
Just to confirm that I get the exact same error. I did not get this with my
8830.. But I wonder also if something didn't change in Ubuntu itself and the
switch to the Curve was a coincidence.
J
--
http://www.shampoo.ca
-Original Message-
From: Matthew McKimmy <[EMAIL PROTECTE
On Fri, Jun 13, 2008 at 05:01:22PM -0400, Matthew McKimmy wrote:
> I went through the whole ./buildgen.sh, ./configure, and make process
> smoothly. However it seemed necessary for me to run make install using
> sudo privileges for it to install properly.
That's correct. Unless you install it so
On Fri, Jun 13, 2008 at 10:54:27PM +, Justin F. Knotzke wrote:
>
>
>Just to confirm that I get the exact same error. I did not get this with
> my 8830.. But I wonder also if something didn't change in Ubuntu itself and
> the switch to the Curve was a coincidence.
Ahh yes, I almost fo
2008/6/13 Chris Frey <[EMAIL PROTECTED]>:
> When you first plug in your device, what Product ID shows when you run
> "lsusb -v" ?
For the 8830 it is:
Bus 003 Device 003: ID 0fca:0004 Research In Motion, Ltd.
For the 8330 it is:
Bus 005 Device 007: ID 0fca:8004 Research In Motion, Ltd.
J
On Fri, Jun 13, 2008 at 08:31:43PM -0400, Justin F. Knotzke wrote:
> For the 8830 it is:
>
> Bus 003 Device 003: ID 0fca:0004 Research In Motion, Ltd.
>
> For the 8330 it is:
>
> Bus 005 Device 007: ID 0fca:8004 Research In Motion, Ltd.
I'm guessing that the MaxPower for these is:
5
Yup, I get 500mA
J
--
http://www.shampoo.ca
-Original Message-
From: Chris Frey <[EMAIL PROTECTED]>
Date: Fri, 13 Jun 2008 20:46:54
To:Barry project development discussion
Subject: Re: [Barry-devel] BB8330 and Ubuntu 8.04 privileges issue
On Fri, Jun 13, 2008 at 08:31:43PM -040
Using the latest out of CVS and with my 8330 connected, when I run
the gui backup program as root I get a dialog box that says:
Socket: Bad OPENED packet in Open
The bash shell reads:
[EMAIL PROTECTED]:~/Projects/barry/udev$ sudo barrybackup
Packet:
: 00 00 08 00 0b 06 01 00
2008/6/13 Justin F. Knotzke <[EMAIL PROTECTED]>:
> Using the latest out of CVS and with my 8330 connected, when I run
> the gui backup program as root I get a dialog box that says:
>
> Socket: Bad OPENED packet in Open
>
> The bash shell reads:
>
> [EMAIL PROTECTED]:~/Projects/barry/udev$ sudo
