Hi Robert,
On Tue, Feb 23, 2016 at 01:27:43PM +0200, robert wrote:
> I forgot to mention that the reason for the this failure is described
> in diagnostic as “CLIR not subscribed”. At each call setup there is a
> “CLIR invocation” although in the mobile.cfg file it is set to “no
> clir”. How can I
I forgot to mention that the reason for the this failure is described in
diagnostic as “CLIR not subscribed”. At each call setup there is a “CLIR
invocation” although in the mobile.cfg file it is set to “no clir”. How can I
remove this condition in LCR ?
Best regards,
Robert,
On Feb 22, 20
HI,
When I try to route calls, the osmo phone which is connected to the real
network starts initiating the call but then immediately releases the connection
with the following cause “Requested facility not subscribed”. Does anyone know
what is causing this error ?
Best regards,
Robert,
On
I will give it a try !
Best regards,
Robert,
On Feb 14, 2016, at 10:13 PM, Harald Welte wrote:
> On Sat, Feb 13, 2016 at 09:31:02AM +0100, Tomcsányi Domonkos wrote:
>> As far as I know osmocomBB doesn’t have a SIP sink yet, you’d need to
>> create the code for that.
>
> You can connect Osmoco
On Sat, Feb 13, 2016 at 09:31:02AM +0100, Tomcsányi Domonkos wrote:
> As far as I know osmocomBB doesn’t have a SIP sink yet, you’d need to
> create the code for that.
You can connect OsmocomBB via its MNCC interface to LCR as a gsm-ms
channel. This is similar to attaching OsmoNITB via its MNCC i
Hi,
Is it the same if try to receive calls from outer networks and route them to a
certain phone connected to my network. Does it also require adding some code?
On Feb 13, 2016, at 10:30 AM, robert wrote:
> Hi Domonkos,
>
> So I understand that it could be done but some more work should be
As far as I know osmocomBB doesn’t have a SIP sink yet, you’d need to create
the code for that.
Cheers,
Domi
> 2016. febr. 13. dátummal, 9:30 időpontban robert
> írta:
>
> Hi Domonkos,
>
> So I understand that it could be done but some more work should be done. Is
> it only a matter of get
Hi Domonkos,
So I understand that it could be done but some more work should be done. Is it
only a matter of getting the right configuration to route outgoing calls via
LCR to the SIP sink of osmocomBB or must I also change some code in
OpenBSC/OsmocomBB ?
Best regards,
Robert,
On Feb 12, 201
Hi Robert,
As far as I know technically this is possible, but you'd need to add some code.
I think you could connect openBSC with osmocomBB using SIP, but I think there
is no SIP sink code yet in the mobile app. Andreas might have something along
these lines, but I could be fully wrong.
So the
Hi,
Is it possible to route a call from a phone connected to openBSC (virtual BTS)
to a real network using an osmocombb phone. In other words, to give a user
within my own network the ability to call another phone connected to any other
operator without routing the call through internet.
10 matches
Mail list logo