Peter Diesner wrote:
Hi,
I think I'm a little closer to a solution.
Wlan0 doesn't work after system start. But executing the following
command manually helps:
sudo modprobe -r b43
sleep 3
sudo modprobe b43
sleep 3
sudo iwconfig wlan0 essid
sleep 3
sudo dhclient wlan0
Hi,
I think I'm a little closer to a solution.
Wlan0 doesn't work after system start. But executing the following command
manually helps:
sudo modprobe -r b43
sleep 3
sudo modprobe b43
sleep 3
sudo iwconfig wlan0 essid
sleep 3
sudo dhclient wlan0
Without sleep 3 it doesn't work. May
Peter Diesner skrev:
Hi,
I downloaded, compiled and installed
http://linuxwireless.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2
following the instruction at http://www.linuxwireless.org/en/users/Download.
I also installed the firmware from
+0100
From: Peter Diesner [EMAIL PROTECTED]
Subject: b43 on gutsy using 2.6.24 doesn't work
To: bcm43xx-dev@lists.berlios.de
Message-ID:
[EMAIL PROTECTED]
Content-Type: text/plain; charset=iso-8859-1
Hi,
i just can't get my wlan work properly on my extensa 5220.
Here's
On Friday 07 March 2008 19:57:57 Peter Diesner wrote:
Hi,
i compiled kernel 2.6.24 with debbuging for b43 enabled:
dmesg | grep b43
[ 38.504708] b43-phy0: Broadcom 4311 WLAN found
Use bleeding edge b43.
--
Greetings Michael.
___
Bcm43xx-dev
Hi,
I downloaded, compiled and installed
http://linuxwireless.org/download/compat-wireless-2.6/compat-wireless-2.6.tar.bz2
following the instruction at http://www.linuxwireless.org/en/users/Download.
I also installed the firmware from
Hi,
i just can't get my wlan work properly on my extensa 5220.
Here's a bunch of information about my notebook.
uname -r
2.6.24-8-generic
lspci | grep -i netw
04:00.0 Network controller: Broadcom Corporation BCM94311MCG wlan mini-PCI
(rev 01)
dmesg | grep b43
[ 34.924306] b43-phy0:
ext Peter Diesner wrote:
Hi,
i just can't get my wlan work properly on my extensa 5220.
Here's a bunch of information about my notebook.
[...]
dmesg | grep b43
[ 34.924306] b43-phy0: Broadcom 4311 WLAN found
[ 40.414718] input: b43-phy0 as /devices/virtual/input/input9
[ 42.491768]