William, or short Vusb to 5V, the result is the same - total stability. You
can do it if you need to enable the USB-Host function at USB0
2015-08-08 23:22 GMT+03:00 William Hermans yyrk...@gmail.com:
So far shorting Vusb to ground seems to be doing the trick. We'll give it
a couple days to be
Hello!
This is the first time I write here. I'm from Spain, so firstly sorry for
my bad english :D
We are connecting a BBB with a 5v 8-relay module, with the pins
66,67,68,69,45,44,23,26, and pin p9_01 for gnd and P9_05 for 5V
We have two problems. When the system start, the relay #1 goes on,
But i think audio (output) was still not working..
Now that the reset bug has a workaround, i'll try and look at audio
again today..
Ok. I'll wait for your reply then.
Thanks for taking the time. Much appreciated.
Best,
Shadi
--
For more options, visit
On Mon, Aug 10, 2015 at 11:09 AM, Nuno Gonçalves nuno...@gmail.com wrote:
On Mon, Aug 10, 2015 at 5:04 PM, Robert Nelson robertcnel...@gmail.com
wrote:
PS, i'm working on adding a PRM_RSTST check to u-boot so i can catch
the reboot reason..
That's really great Robert. Thanks!
Felipe
*It was config_mii=m yeah we need that =y for nfs root, as the phy*
* won't load.. kernel fix pushed out...*
* Regards,*
Yeah figured it was something like that. Was a bit upset at the time . . .
Had just spent all day messing with that, among many other things related -
When All I
On Sun, Aug 09, 2015 at 05:59:09PM -0500, Robert Nelson wrote:
Update:
Last friday i built v4.1-rc1 and 4.1.4-ti-r8 with the commit Nuno
found and reverted it..
[test-bbb-1: 4.1.4-ti-r8.1 (up 2 days, 10 hours, 3 minutes)]
[test-bbb-2: 4.1.4-ti-r8.1 (up 2 days, 9 hours, 58 minutes)]
On Mon, Aug 10, 2015 at 10:57 AM, Felipe Balbi ba...@ti.com wrote:
On Sun, Aug 09, 2015 at 05:59:09PM -0500, Robert Nelson wrote:
Update:
Last friday i built v4.1-rc1 and 4.1.4-ti-r8 with the commit Nuno
found and reverted it..
[test-bbb-1: 4.1.4-ti-r8.1 (up 2 days, 10 hours, 3 minutes)]
On Fri, Aug 7, 2015 at 8:55 PM, William Hermans yyrk...@gmail.com wrote:
Anyhow, this is the kernel's fault. Somehow it's different, and to be honest
I do not have the time or energy to mess with it.
It was config_mii=m yeah we need that =y for nfs root, as the phy
won't load.. kernel fix
3 weeks ago I asked for it For what is worth I believe the OMAP and
PMIC reset reason registers should be part of the boot log so future
reboot problems can be sorted..
But I just asked, I didn't actually code!
Not sure if it is easy to retrieve both, or if PMIC is that much
relevant for this
Bruce:
The system generates a syslog text file per day stored at /var/log/.
It archives all previous days indefinitely as syslog.1 then syslog.2 etc.
You can easily examine these files and see the reboot at
example:
cat /var/log/syslog
You may have to uncompress older files.
If the BBB did
On Mon, Aug 10, 2015 at 1:05 PM, Robert Nelson robertcnel...@gmail.com wrote:
On Mon, Aug 10, 2015 at 11:23 AM, Nuno Gonçalves nuno...@gmail.com wrote:
3 weeks ago I asked for it For what is worth I believe the OMAP and
PMIC reset reason registers should be part of the boot log so future
On Mon, Aug 10, 2015 at 11:23 AM, Nuno Gonçalves nuno...@gmail.com wrote:
3 weeks ago I asked for it For what is worth I believe the OMAP and
PMIC reset reason registers should be part of the boot log so future
reboot problems can be sorted..
But I just asked, I didn't actually code!
Not
Hi again,
On Mon, Aug 10, 2015 at 02:48:11PM -0500, Felipe Balbi wrote:
Hi,
I'll leave my BBB running with v4.1.0 vanilla, with Debian unstable
userland.
are you guys running with or without wkup_m3 firmware ? Is PM enabled at
all ?
[ trim ]
--
balbi
--
For more options, visit
unless your using level translators your going to fry your BBB
BBB has 3.3v I/O
On 8/10/2015 9:44 AM, Manuel David Garcia Cardenas wrote:
Hello!
This is the first time I write here. I'm from Spain, so firstly sorry
for my bad english :D
We are connecting a BBB with a 5v 8-relay module,
On Mon, Aug 10, 2015 at 5:04 PM, Robert Nelson robertcnel...@gmail.com wrote:
PS, i'm working on adding a PRM_RSTST check to u-boot so i can catch
the reboot reason..
That's really great Robert. Thanks!
Nuno
--
For more options, visit http://beagleboard.org/discuss
---
You received this
It is not a flakey DC jack. But yes the symptoms do mimic that kind of
failure.
Same hardware works fine with Debian 8.1/kernel 3.14 and prior.
It happens under all loading /activity, but easy to reproduce with the
board idling, minimum console software load.
It does not happen with the board
Hi Maxim,
The reason why we did this is that the board in question was mounted to a
piece of wood, that is screwed into a wall. So grounding Vbus would not
have been easy. Vusb for us was really easy. Solder the outside pins on a
USB A socket to the outer shielding, then plug a MALE A to mini B
Hi,
On Mon, Aug 10, 2015 at 01:56:04PM -0500, Robert Nelson wrote:
On Mon, Aug 10, 2015 at 1:05 PM, Robert Nelson robertcnel...@gmail.com
wrote:
On Mon, Aug 10, 2015 at 11:23 AM, Nuno Gonçalves nuno...@gmail.com wrote:
3 weeks ago I asked for it For what is worth I believe the OMAP and
RCNelson, Thanks for you help so far.
When trying to compile the 4.1 kernel i'm running into an ftrace error:
...
arch/arm/kernel/ftrace.c: In function
‘ftrace_arch_code_modify_post_process’:
arch/arm/kernel/ftrace.c:93:2: error: implicit declaration of function
‘flush_tlb_all’
On Mon, Aug 10, 2015 at 2:00 PM, Felipe Balbi ba...@ti.com wrote:
Hi,
On Mon, Aug 10, 2015 at 01:56:04PM -0500, Robert Nelson wrote:
On Mon, Aug 10, 2015 at 1:05 PM, Robert Nelson robertcnel...@gmail.com
wrote:
On Mon, Aug 10, 2015 at 11:23 AM, Nuno Gonçalves nuno...@gmail.com wrote:
3
On Mon, Aug 10, 2015 at 2:16 PM, Robert Nelson robertcnel...@gmail.com wrote:
On Mon, Aug 10, 2015 at 2:00 PM, Felipe Balbi ba...@ti.com wrote:
Hi,
On Mon, Aug 10, 2015 at 01:56:04PM -0500, Robert Nelson wrote:
On Mon, Aug 10, 2015 at 1:05 PM, Robert Nelson robertcnel...@gmail.com
wrote:
I have been using the 5370 driver for usb wifi dongle successfully with
ability to support both Master and Managed mode with no issues whatsoever.
However last batch of wifi dongles delivered no longer work and lsusb shows
Bus 001 Device 002: ID 148f:7601 Ralink Technology, Corp.
instead of
Hi,
I'll leave my BBB running with v4.1.0 vanilla, with Debian unstable
userland.
On Mon, Aug 10, 2015 at 02:20:22PM -0500, Robert Nelson wrote:
On Mon, Aug 10, 2015 at 2:16 PM, Robert Nelson robertcnel...@gmail.com
wrote:
On Mon, Aug 10, 2015 at 2:00 PM, Felipe Balbi ba...@ti.com wrote:
On Mon, Aug 10, 2015 at 2:55 PM, Felipe Balbi ba...@ti.com wrote:
Hi again,
On Mon, Aug 10, 2015 at 02:48:11PM -0500, Felipe Balbi wrote:
Hi,
I'll leave my BBB running with v4.1.0 vanilla, with Debian unstable
userland.
are you guys running with or without wkup_m3 firmware ? Is PM enabled
On Mon, Aug 10, 2015 at 2:59 PM, Robert Nelson robertcnel...@gmail.com wrote:
On Mon, Aug 10, 2015 at 2:55 PM, Felipe Balbi ba...@ti.com wrote:
Hi again,
On Mon, Aug 10, 2015 at 02:48:11PM -0500, Felipe Balbi wrote:
Hi,
I'll leave my BBB running with v4.1.0 vanilla, with Debian unstable
On Mon, Aug 10, 2015 at 03:04:52PM -0500, Robert Nelson wrote:
On Mon, Aug 10, 2015 at 2:59 PM, Robert Nelson robertcnel...@gmail.com
wrote:
On Mon, Aug 10, 2015 at 2:55 PM, Felipe Balbi ba...@ti.com wrote:
Hi again,
On Mon, Aug 10, 2015 at 02:48:11PM -0500, Felipe Balbi wrote:
Hi,
On Mon, Aug 10, 2015 at 2:01 AM, 박연호 nice...@gmail.com wrote:
I had used the Jessie image, but it has problems.
First, USB Network 192.168.7.2 doesn't work constantly,
For example, after reboot or reconnect bbb, it doesn't wort at all.
Why didn't you report this? I had another user report it
On Mon, Aug 10, 2015 at 7:32 AM, Robert Nelson robertcnel...@gmail.com wrote:
On Mon, Aug 10, 2015 at 2:01 AM, 박연호 nice...@gmail.com wrote:
I had used the Jessie image, but it has problems.
First, USB Network 192.168.7.2 doesn't work constantly,
For example, after reboot or reconnect bbb, it
I had used the Jessie image, but it has problems.
First, USB Network 192.168.7.2 doesn't work constantly,
For example, after reboot or reconnect bbb, it doesn't wort at all.
Second, finding networking takes too much time.
Thirds, somehow wheezy's HDMI has better comparability.
Generally,
Hello,
I've verified beagleboard-xM camera LI-5M03 (mt9p031) with device tree on
Linux 4.2.0-rc5.
If anybody interested, please go through link for more details
https://alaganraj.wordpress.com/2015/08/08/beagleboard-xm-camera-li-5m03-mt9p031-support-with-device-tree/
Thanks Regards,
Hello,
I've verified beagleboard-xM camera LI-5M03 (mt9p031) with device tree
on Linux 4.2.0-rc5 with the help of Laurent and Sakari.
If anybody interested, please go through link for more details
Hi Chad,
Thank you for pointing us to that section. We missed seeing the
recommendation, because it was somewhat implied. We were searching for an
instruction like To power down the board, do ...
Lawrence
On Wednesday, August 5, 2015 at 6:34:45 AM UTC-7, cmbaker3 wrote:
Section 5.10 in
Hi Gerald,
Do you mean that the power button function may not necessary work? Is the
SW that supports it SW that I will need to develop, like the C++ SW that
arunbarn...@gmail.com was developing?
Lawrence
On Wednesday, August 5, 2015 at 9:07:57 AM UTC-7, Gerald wrote:
Assuming that the SW
I know that this post is quite old and I hope you got it fixed. I use
kernel 3.12.10 and I can make the can device up without any problem.
However I can't get any can mesaages from another board which I am %100
sure that it is working properly. I use candump utility to check received
packets.
Hi folks,
i'm currently working with the PRU of the beagle bone black to read and
decode a SSI Protocol.
Therefore I want to use the build in 28 bit shift register of the PRU. I
found out, that the shift register is configured via the GPCFG0 (pru0)
register.
Can anyone explain to me, how I can
Hello Sir,
I need to port Ubuntu OS in beagle board xm rev C using raw sd card,Can
anyone help me with this
Thanks Regards
Harsha R
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard
Hi Gerald,
So to unmount the drives and power down the BBB, I can either push the
power button momentarily or use the Linux shutdown command?
Lawrence
On Wednesday, August 5, 2015 at 5:39:06 AM UTC-7, Gerald wrote:
By doing this you can get corruption. Linux requires that you unmount the
Using Beaglebone Black Rev C
Not sure if I accidentally deleted a file or broke during a recent update
or perhaps when I installed wifi antenna.
When I point my browser to 192.168.7.2 , the page does not load I get
Cannot GET /
Similar error when I navigate to the IP address as well.
I am using a BBB to connect to some third party hardware. The hardware
serial communication at baud 230400 (8/N/1 - bits/par/stop).
I didn't use the J1 port since it only maps Tx/Rx/Gnd by default.
I need Tx/Rx/Gnd/DTR/RTS/CTS.
To try and accommodate this, I purchase a cape (USB-2COM-BB) from
Nothing is plugged in, and no program is running at all for my tests.
2015-08-07 23:40 GMT-03:00 evilwulfie evilwul...@gmail.com:
i can see that if your running full tilt MHZ with ethernet plugged in
it runs a bit below 500ma normally
whats running and whats the cpu load ?
On 8/7/2015
On Mon, Aug 10, 2015 at 4:13 AM, swetankgupt...@gmail.com wrote:
insserv: Starting led_aging.sh depends on rmnologin and therefore on system
fac!
Reflash:
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2015-07-28
embest screwed up their default image..
Regards,
--
Robert Nelson
On Mon, Aug 10, 2015 at 12:49 AM, r.hars...@gmail.com wrote:
Hello Sir,
I need to port Ubuntu OS in beagle board xm rev C using raw sd card,Can
anyone help me with this
http://elinux.org/BeagleBoardUbuntu#BeagleBoard_xM
Regards,
--
Robert Nelson
https://rcn-ee.com/
--
For more
there are some issues with the audio rev b, but i can't find that
board for sale anywhere anymore. (i have the rev a)
https://rcn-ee.com/
Hi Robert,
Could you elaborate on the issues you're seeing with the Audio Cape? I'm
having trouble using the audio system as described here
On Mon, Aug 10, 2015 at 9:05 AM, Shadi Abdu-Rahman transie...@gmail.com wrote:
there are some issues with the audio rev b, but i can't find that
board for sale anywhere anymore. (i have the rev a)
Hi Robert,
Could you elaborate on the issues you're seeing with the Audio Cape? I'm
having
Hi everybody!
I have a Beaglebone Black running the last Debian image and for my current
project I need to cross-compile it with Eclipse from my WIndows OS.
I'm fairly new both to microcontrollers and C++ (programming in general if
I am to be honest) and right now I'm still trying to
45 matches
Mail list logo
