[beagleboard] Re: Unable to update device tree overlay file

On Monday, March 23, 2015 at 6:27:06 AM UTC+3:30, Colin Bester wrote: > > In adding Audio Cape (BB-BONE-AUDI-02-00A0) to beaglebone black which also > has LCD4 mounted I receive a GPIO 19 conflict error. > > Looking at the dts file I see it has specified exclusive use for gpio1_18 > and

Re: [beagleboard] Problems building kernel on Beaglebone Black

Ok, that makes sense. thanks. I'll give it a go as soon as I get the chance (which will probably not be for a few days). It's a steep learning curve, but I'm sure it will all fall into place... Regards Tom. -- For more options, visit http://beagleboard.org/discuss --- You received this

[beagleboard] Re: am3352 boot with kernel & FS on NAND

I removed the uEnv.txt in the boot partition, and it just works. On Tuesday, October 13, 2015 at 3:36:33 AM UTC-7, gvk51 wrote: > > We have a custom board based on AM3352, and the boot sequence is as > follows. > > I have 2MB SPI flash, where in I have MLO & u-boot > > I want to save kernel &

RE: [beagleboard] Re: JTAG Debugging - 2 Code Composers on the Same Machine - One under Ubuntu - The Other under Windows

Yes Gerald From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of Jeff Andich Sent: Wednesday, August 16, 2017 9:17 AM To: BeagleBoard Cc: raulrathm...@outlook.com Subject: [beagleboard] Re: JTAG Debugging - 2 Code Composers on the

[beagleboard] Re: JTAG Debugging - 2 Code Composers on the Same Machine - One under Ubuntu - The Other under Windows

Quick Question on the BeagleBoard-X15's which are now available: On the BB-X15, does the PMIC shutdown after 7 seconds like on TI am572xEVM rev A3? I'm fighting this right now as I'm attempting to connect CCS7.2 to the A15_0 core using the XDS100v2 emulator. Thanks! Jeff On Monday, August

RE: [beagleboard] expansion connector spec?

That is what I have. Gerald -Original Message- From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of Robert Nelson Sent: Wednesday, August 16, 2017 8:43 AM To: Beagle Board Subject: Re: [beagleboard] expansion connector

Re: [beagleboard] expansion connector spec?

On Wed, Aug 16, 2017 at 4:08 AM, wrote: > Hi Gerald, > > Now that the Rev C boards are publicly available, do you have any update on > your expansion boards? it would be nice to see a breakout, with pci-e like the am57xx ti adapter board, and with all the pruss

RE: [beagleboard] PCIe possibilities with BeagleBoard x15 (SATA)

Could you use a SATA HUB? Gerald From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of gra...@grahamweldon.com Sent: Wednesday, August 16, 2017 7:47 AM To: BeagleBoard Subject: [beagleboard] PCIe possibilities with BeagleBoard x15

RE: [beagleboard] expansion connector spec?

Not at the moment. Gerald From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of tony.langley.tlt...@gmail.com Sent: Wednesday, August 16, 2017 4:08 AM To: BeagleBoard Subject: Re: [beagleboard] expansion connector spec? Hi Gerald,

Re: [beagleboard] expansion connector spec?

Hi Gerald, Now that the Rev C boards are publicly available, do you have any update on your expansion boards? Tony On Thursday, 10 November 2016 05:53:31 UTC+11, Gerald wrote: > > No that I have seen. These connectors are very expensive. > But the boards i have coming don't use these, per se..

Re: [beagleboard] "no display name and no $display environment variable"

Thanks for your comments. The f/ph type was quickly solved. (thanks!). But then it still does not work. After a couple of days experimenting and googling I get lost. I know most systemd commend by heart now ;-). Now I get the error: ac.service is not loaded properly. Error: invalid

Re: [beagleboard] Re: wifi configuration on beaglebone black.

Hi, Thank you so much for your response. How do you say, the issue is because of firmware only. Thanks Madhu On Sat, Aug 12, 2017 at 1:37 PM, Mala Dies wrote: > Hello, > > You might have to update the firmware on your WiFi dongle. > > Seth > > > On Wednesday, August 9, 2017