[beagleboard] Re: PocketBeagal Debian internet over macOS 10.13.2 USB host? (internet over USB)

I have been seeing the same thing with MacOS 10.13.2. I am able to ssh into the pocket beagle over the USB, but when I try to turn on Internet Sharing to be able to forward to the internet then the ssh connection hangs and I can no longer work on the ssh connection I had established. I

RE: [beagleboard] What happens if I use 12V instead on 5V power supply on BBB ?

You get to buy a new one. Nothing you can really do to bring it back. Gerald From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of Ajeya Anand Sent: Monday, December 18, 2017 3:06 PM To: BeagleBoard Subject: [beagleboard] What

[beagleboard] What happens if I use 12V instead on 5V power supply on BBB ?

Cannot see the power lights coming up when I switched to 5V power supply after intially using a 12V supply. What can I check to bring the board to work normally ? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google

Re: [beagleboard] PocketBeagal Debian internet over macOS 10.13.2 USB host? (internet over USB)

On 19/12/17 06:04, Jon Pellant wrote: > if you look at the console image, you will see the results of the > 'ifconfig' showing both a usb0: 192.168.7.1 and a usb1: 192.168.6.1. You > will also note the added route for the default gateway.  My apologies, the image was hosted elsewhere and so

Re: [beagleboard] Re: My Windows Drivers for BBB won't install

On Mon, Dec 18, 2017 at 3:34 PM, Michael Wood wrote: > Certain versions of windows prevent turning on test signing (this way) with > Secure Boot / UEFI, which has to be turned off first. > > A faster way is to disable driver signature enforcement for one boot cycle. Or

[beagleboard] Re: My Windows Drivers for BBB won't install

Certain versions of windows prevent turning on test signing (this way) with Secure Boot / UEFI, which has to be turned off first. A faster way is to disable driver signature enforcement for one boot cycle. On Saturday, January 28, 2017 at 6:23:00 PM UTC-7, woody stanford wrote: > > I had a

Re: [beagleboard] PocketBeagal Debian internet over macOS 10.13.2 USB host? (internet over USB)

if you look at the console image, you will see the results of the 'ifconfig' showing both a usb0: 192.168.7.1 and a usb1: 192.168.6.1. You will also note the added route for the default gateway. As I said above, there may be an issue with macOS and the network preferences and the IP

Re: [beagleboard] PocketBeagal Debian internet over macOS 10.13.2 USB host? (internet over USB)

See the terminal image above. As you can see the ping times out... I believe the issue is related to the IP address that you see in the macOS Network Preferences. On Monday, December 18, 2017 at 9:17:16 AM UTC-6, Stuart Longland wrote: > > On 19/12/17 00:32, Jon Pellant wrote: > > I think the

[beagleboard] Re: Using eCap feature in Python

Using C code and the inotify interface, I was able to capture GPIO pulses on "/sys/devices/platform/ocp/44e07000.gpio/gpio/gpio26/value" up to 20kHz. It would be nice to use the eCAP registers though. Thanks for the feedback. On Friday, December 15, 2017 at 2:25:57 PM UTC-6, Dennis Lee

Re: [beagleboard] Car Hacking with a PocketBeagle (CAN, SWCAN, LIN/ISO9141/K-Line, J1850 and more)

Hi Earl, On Mon, Dec 18, 2017 at 11:58 AM, Earl S wrote: > We released the Macchina M2, an Arduino-based car tinkering interface a > little while ago. M2’s interface board has 2X CAN, 1X SWCAN, 2X > LIN/ISO9141/K-Line, J1850, 6X 12v GPIO and more. In our latest experiment, >

[beagleboard] Car Hacking with a PocketBeagle (CAN, SWCAN, LIN/ISO9141/K-Line, J1850 and more)

We released the Macchina M2, an Arduino-based car tinkering interface a little while ago. M2’s interface board has 2X CAN, 1X SWCAN, 2X LIN/ISO9141/K-Line, J1850, 6X 12v GPIO and more. In our latest experiment, we replaced our processor board with the PocketBeagle and now we have an awesome

[beagleboard] Re: [beaglebone] Unable to use WP8548 with ConnMan

On Mon, Dec 18, 2017 at 10:24 AM, Tracy Smith wrote: > Sounds useful since basically I need to set up conman to get a WiFi access > point. Do you have a page or notes on how you set it up? Just curious. I’m > googling the process now on setting up conman correctly for a

[beagleboard] Re: [beaglebone] Unable to use WP8548 with ConnMan

On Mon, Dec 18, 2017 at 9:52 AM, Tracy Smith wrote: > ok thanks Robert. Did you configure the kernel and wpa_supplicant for > WiFi independent of cellular? For that project with cellular, i used ppp for the cellular uplink. connman was used to create a wifi access point.

[beagleboard] Re: [beaglebone] Unable to use WP8548 with ConnMan

On Mon, Dec 18, 2017 at 9:46 AM, Tracy Smith wrote: > Hi Robert, > > What kernel and wpa_supplicant configuration changes are required to > enable a cellular connection and WiFi on Linux 14.4? > > Or, do you have a page describing what is required to set up a > cellular

Re: [beagleboard] Re: PocketBeagles are Unstable

Looks like I spoke too soon. Both PB's reset themselves overnight, running Stretch 9.3 IoT. With the Stretch 9.3 IoT release, it is more like once per day, than the previous four times per day, but it is still happening. Happens on both 4.4 and 4.9. To answer Robert's question. I generally

[beagleboard] Re: [beaglebone] Unable to use WP8548 with ConnMan

Hi Robert, What kernel and wpa_supplicant configuration changes are required to enable a cellular connection and WiFi on Linux 14.4? Or, do you have a page describing what is required to set up a cellular connection with/without Connman, and a WiFI connection using connman on the BeagleBone

Re: [beagleboard] PocketBeagal Debian internet over macOS 10.13.2 USB host? (internet over USB)

On a mac you should get an 192.168.6.2 address thru the usb-cdc interface. (with no external 3rd party drivers installed) the 192.168.7.2 address is given thru a rndis interface (on windows systems). This change allows us to use the built-in drivers of both systems... Regards, -- Robert

[beagleboard] Re: [BeagleBone Blue] Ask yocto build image for BeagleBone Blue

add CC to beagleboard@googlegroups.com Hello all, I am building new BB blue image via using yocto to study new ROS.org . But I don’t see meta layer for this board. Could you share with me how to build new image via using yocto for