Many many thanks.
~Richard
On Wednesday, December 5, 2018 at 3:51:04 PM UTC-5, RobertCNelson wrote:
>
> On Wed, Dec 5, 2018 at 2:38 PM Richard >
> wrote:
> >
> > Hi! I'm having difficulty understanding and modifying the BBBW network
> configuration.
> >
> > At boot on the BBBW, somehow,
On Wed, Dec 5, 2018 at 2:38 PM Richard wrote:
>
> Hi! I'm having difficulty understanding and modifying the BBBW network
> configuration.
>
> At boot on the BBBW, somehow, these IP addresses are assigned
> SoftAP0: 192.168.8.1
/etc/default/bb-wl18xx (changeable)
> lo: 127.0.0.1
> usb0:
Sorry, copied and pasted from my application code that is driving the
network configuration...the {0} in NetworkInterfaceBlackist is eth0
Mike
On Wed, Dec 5, 2018 at 3:45 PM Mike Brandon wrote:
> In my limited experience, I ran into a lot of issues trying to modify the
> network settings as
Harke,
You should try running your script from the cli using the exact same
command you use for the exec start line in your service file. It should
give you the same errors you are seeing. That would be good. If not, the
problem is that your environment doesn't match. It will probably end up
In my limited experience, I ran into a lot of issues trying to modify the
network settings as you are running into. I *believe* that the network
settings are being controlled by conman. So I added to /
etc/connman/main.conf the following:
NetworkInterfaceBlacklist=SoftAp0,usb0,usb1,{0},can0,can1
Hi! I'm having difficulty understanding and modifying the BBBW network
configuration.
At boot on the BBBW, somehow, these IP addresses are assigned
SoftAP0: 192.168.8.1
lo: 127.0.0.1
usb0: 192.168.7.2
usb1: 192.168.6.2
wlan0: 192.168.1.xxx
But I can't figure out where each of these
login as: debian
debian@Beaglebone's password:
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the
Hello Jim and Seth,
Thank you for your support. The service test scripts all run fine. My own
scripts persist in the error given above. My own service loads but aborts
at import serial, which, I guess, has not so much to do with serial, as
with something else. I will try and upload the relevant
*Hi,*
*I know there is many topics about NFS and TFTP. But I still could not find
why my board is not booting via NFS.. Have been trying couple of days many
many different ways now and I have no clue where it goes wrong and its
getting frustrating now.*
*I believe there might be something
Hi Jim!
I cannot answer your questions, but perhaps point you to a further
solution: Some years ago I needed multiple Dallas temperature sensors input
for a project, and tested the kernel driver. I found out that (at this
time) the kernel driver doesn't support simultaneous measurements from
Excellent, thank you! I got my GPIO CS pins to work. For reference (in case
anyone needs the same information), here's my dts file:
/dts-v1/;
/plugin/;
/ {
compatible = "ti,beaglebone", "ti,beaglebone-black";
/* identification */
part-number = "BB-SPICAPE-01";
version = "00A0";
fragment@0 {
Hello Learned group,
I have an I2C problem that I confuses me: I have activated I2C1 in
uEnv.txt. That works. Now i2cdetect -y -r i (for i = 0,1,2) gives a quick
response. However, i2c2 behaves like i2c1. i=1 shows nothing connected, 0
shows some UU's and 2 shows devices I can recognise: I can
12 matches
Mail list logo
