Re: [beagleboard] BeagleBone Black CAN Bus Cape

Thanks for the reply. I just realized some DIY projects such as this one https://www.instructables.com/id/DIY-Beaglebone-CAN-Bus-Cape/ and it seems very straightforward. Just to be clear, the hardware side is just the 4 wires, TX/RX and CAN-H/CAN-L right? On Friday, February 22, 2019 at

[beagleboard] BeagleBone Black CAN Bus Cape

Hi. I have a project idea that involves using the BeagleBone Black CAN bus controller. I found this cape on e-linux https://elinux.org/Beagleboard:BeagleBone_CANBus but then I realized it is discontinued long time ago, most distributors have it out of stock or discontinued. Is there any

[beagleboard] Pin multiplexing on the BB Green, no omap_mux available.

Hello all I started watching Derek Molloy's YouTube series on Beaglebone and in this video he explains on how to Pin-mux the GPIO pins on the board from the directory

[beagleboard] Questions about SD card boot and eMMC image flashing

Hello all, I have a few questions and I found different answers no solid reference one: 1. What is the difference between flasher and pre-built image? 2. What is the correct way to boot an image from SD card? 3. How to flash the on-board eMMC with a pre-built image? a flasher image?

[beagleboard] Flashing the on-board eMMC of the BB Green with new image

Hello I got confused reading about this issue so some question came up: Can you please tell me the correct way to flash the eMMC with new image? And also what is the correct way to boot only from SD-Card without flashing on-board eMMC? Will any pre-built image copied with either

Re: [beagleboard] Re: Installing Android on BeagleBone Green

No problem at all, downloading and testing now. Thanks in advance! On Saturday, May 21, 2016 at 12:45:37 AM UTC+3, Keith Conger wrote: > > I've made the all the necessary changes to support the bbgreen in my > manifest and git repos. Let me know how it goes, I don't have time to test > at the

[beagleboard] Re: Installing Android on BeagleBone Green

Hi Keith Is it possible to give me more details on how to apply this patch? I went to their website and found the build process easy to perform. On Friday, May 20, 2016 at 6:22:21 AM UTC+3, Keith Conger wrote: > > The issue is the kernel in bbbandroid doesn't have the bbgreen device tree >

Re: [beagleboard] Installing Android on BeagleBone Green

Hi Wulf If I added an HDMI cape to the board will it work? On Friday, May 20, 2016 at 4:12:30 AM UTC+3, Wulf Man wrote: > > green does not have a hdmi framer. maybe the image expects a framer ? > > On 5/19/2016 3:02 PM, cpe.3...@gmail.com wrote: > > > Hello all, > > > I downloaded the android

[beagleboard] Installing Android on BeagleBone Green

Hello all, I downloaded the android image from here and I followed the usual instructions using Win32DiskImager. I inserted the 16GB SD card to the beaglebone and while holding down the S2 button that is next to the SD card slot I applied power using