Dear Robert,
Is it possible to update eMMC in the same way as we do it for Nand.
Like : read the MLO in ram address 0x8200 then from RAM we can write
into eMMC.
Please suggest interface used to do this. Putting into SD card partition
and then flashing auto mode.
Please suggest if I can use
On Wed, Sep 10, 2014 at 9:33 AM, Niraj Kumar jhanira...@googlemail.com wrote:
Dear Robert,
Is it possible to update eMMC in the same way as we do it for Nand.
Like : read the MLO in ram address 0x8200 then from RAM we can write
into eMMC.
Please suggest interface used to do this. Putting
...@gmail.com wrote:
From: N Kumar jhanira...@googlemail.com
Reply-To: beagleboard@googlegroups.com beagleboard@googlegroups.com
Date: Tuesday, August 19, 2014 at 6:43 AM
To: beagleboard@googlegroups.com beagleboard@googlegroups.com
Subject: Re: [beagleboard] u boot serial issue
Hi John
On Sun, Aug 24, 2014 at 9:02 AM, Niraj Kumar jhanira...@googlemail.com wrote:
Hi,
I am able to boot uboot. I can see uboot report No NAND device but suppose
to be 2GB NAND device the Rev B boards?
NAND =/= eMMC.. The RevB boards are shipped with 2GB of eMMC..
Regards,
--
Robert Nelson
From: N Kumar jhanira...@googlemail.com
Reply-To: beagleboard@googlegroups.com beagleboard@googlegroups.com
Date: Tuesday, August 19, 2014 at 6:43 AM
To: beagleboard@googlegroups.com beagleboard@googlegroups.com
Subject: Re: [beagleboard] u boot serial issue
Hi John,
Thanks for response
Hi Beagle bone black experts,
I have recently started to setup beagle bone black. Initially it was with
great difficulty I was able to get ttl to usb cable.
Now I have setup where I can get serial logs in serial console application
like teraterm.
I would explain my setup and then the real issue.
From: Niraj Kumar jhanira...@googlemail.com
Reply-To: beagleboard@googlegroups.com beagleboard@googlegroups.com
Date: Sunday, August 17, 2014 at 12:37 AM
To: beagleboard@googlegroups.com beagleboard@googlegroups.com
Subject: [beagleboard] u boot serial issue
Hi Beagle bone black experts