Re: [beagleboard] Kernel change and naming convention (for the sake of uio / prussdrv)

ok thanks William for the heads-up. Did a check on 4.1.5-ti-r10, so the non-rt version, but no luck yet (but not out of options). Had one failure again truing to apt-get install a 4.1.5 bone15 kernel, so need to try that as well. I missed Robert's remark though earlier in the post to use

Re: [beagleboard] Re: Python GPIO Error

On 14/07/16 22:40, msriram1...@gmail.com wrote: While I try to implement it using the Beaglebone Black I am getting the following error. "Traceback (most recent call last): File "ult.py", line 5, in import BBIO.GPIO as GPIO# Import GPIO library ImportError: No

[beagleboard] Re: Modified BBB-eMMC flasher for debian is failing with ext4 errors

Hi all, I performed the test as suggested with a much shorter ground wire instead of the longer one I was using. Here is a picture of the setup: Since then, I

[beagleboard] ็How to change SSID of SoftAp0 of BBGW

I would like to change SSID to be my own name. Currently It show* BeagleBoneXX* which is default SSID name. I have tried a couple of days but not found how to change it. *Do you know how to change SSID of SoftAp0 in BBGW?* Do you have any idea? -- For more options, visit

Re: [beagleboard] Re: Modified BBB-eMMC flasher for debian is failing with ext4 errors

I think the spike you see is either power source related or you still have measurement issues. Start by using twisted pair to source the power supply or you can even just twist the existing wires onto themselves. Either way, I don’t think this is an issue. From the TPS65217C datasheet (Table

[beagleboard] Re: UART, serial port read C/C++

Hello Andrey, I am having almost similar problem as yours, just wondering have you found the reason behind it? I have searching through the web but couldn't find related answer. Regards, Regina On Wednesday, May 7, 2014 at 2:42:34 AM UTC+8, Andrey wrote: > > Hello, > > I need to use an

Re: [beagleboard] Re: UART, serial port read C/C++

Hi Regina, Can I help you? Are you writing serial port driver with C? Best regard, Le Hoang Vu Vào 18-07-2016 10:59, "Regina Choi" đã viết: > Hello Andrey, > > I am having almost similar problem as yours, just wondering have you found > the reason behind it? I have

[beagleboard] Re: How to use PRU constants table?

Thanks, I found it in the PRU support package. But I wonder if this really saves some time/code... Am Freitag, 15. Juli 2016 20:59:12 UTC+2 schrieb Greg: > > There is an example in the PRU support package: > > http://git.ti.com/pru-software-support-package > > Look in the examples folder for