[beagleboard] Bluetooth connection problem

Out of the box I am having great difficulty connecting my beaglebone blue to any other device via bluetooth using the command line bluetoothctl module. In brief, from the command line I can go into the bluetoothctl utility. >From there I have been able to successfully pair to my phone. I can

Re: [beagleboard] new bbb eeproms

nice to know a few were programmed correctly On 8/30/2018 11:17 AM, Robert Nelson wrote: > On Thu, Aug 30, 2018 at 1:09 PM evilwulfie wrote: >> here is something a bit different i found in one board >> >> eeprom:[A335BNLT000C1821BBBG1067] > That's a GHI BeagleBone Black, made week 21 of 2018, #

Re: [beagleboard] BeagleBone Black GPS PPS and Chrony for time sync

First off, Thanks Robert for all your help. Looks like we are up and running! Next, I wanted to post a few notes in case others run into the issues that I had. 1) From a clean install, apt-get update then apt-get upgrade 2) git clone https://github.com/beagleboard/bb.org-overlays.git 3) cd

Re: [beagleboard] BeagleBone Black GPS PPS and Chrony for time sync

Perfect! That seems to have fixed my issues! Ill be sure to add a post on the web describing the procedures we went through to help others! I do have one other question for you. If this is out of scope, Ill ask it on another forum, but I figured I would start here... Now I have confirmed

[beagleboard] new bbb eeproms

here is something a bit different i found in one board eeprom:[A335BNLT000C1821BBBG1067] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop

Re: [beagleboard] BeagleBone Black GPS PPS and Chrony for time sync

On Thu, Aug 30, 2018 at 12:26 PM Thomas wrote: > > Robert, > I can't thank you enough for helping me through this. There is very little > information available online regarding this procedure with this kernel > version... > > First, I made the edit that you recommended.. Now, the BBB reboots

Re: [beagleboard] BeagleBone Black GPS PPS and Chrony for time sync

I have re-imaged my BBB and made the correction to the typo in my overlay file. However, it appears as if I am having the same issue. When I install the overlay in the uEnv.txt file and reboot, I am never able to ssh back into the BBB. My file is below for your review. I can't seem to

Re: [beagleboard] new bbb eeproms

On Thu, Aug 30, 2018 at 1:09 PM evilwulfie wrote: > > here is something a bit different i found in one board > > eeprom:[A335BNLT000C1821BBBG1067] That's a GHI BeagleBone Black, made week 21 of 2018, # 1067 Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit

Re: [beagleboard] BeagleBone Black GPS PPS and Chrony for time sync

Robert, I can't thank you enough for helping me through this. There is very little information available online regarding this procedure with this kernel version... First, I made the edit that you recommended.. Now, the BBB reboots and I can see NEMA data coming from the GPS chip. However,

Re: [beagleboard] BeagleBone Black GPS PPS and Chrony for time sync

On Thu, Aug 30, 2018 at 10:18 AM Thomas wrote: > > I have re-imaged my BBB and made the correction to the typo in my overlay > file. However, it appears as if I am having the same issue. When I install > the overlay in the uEnv.txt file and reboot, I am never able to ssh back into > the BBB.

Re: [beagleboard] Linux Kernel failed to build: ERROR: no certificate subject alternative name matches

I edited system.sh to have the full link to Linaro 7.3.1. When building the kernel, there is a blue screen coming up. What should I do with it? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups

[beagleboard] Re: Welcome the Fall 2018 Embedded Linux Class to this group

Hi Dr. Yoder, I am looking forward to this quarter and seeing what we can do with the BeagleBone! --Matt Howlett On Monday, August 27, 2018 at 8:28:04 AM UTC-4, Mark A. Yoder wrote: > > The purpose of this posting is to announce that I'm once again teaching > an Embedded Linux class based on

Re: [beagleboard] Run Qt on Boot up

Hi Robert, I am able to get it working on beagleboard using slim and openbox, but its not working on my beagle clone. As in my beagle clone I don't have the HDMI display connected at the startup, and slim does not launch. How can I get slim to launch even if nothing is connected at HDMI, the

Re: [beagleboard] Re: battery power for PocketBeagle?

It runs well with the soldered implementation. My breadboards are a little cheap. The attached minicom_20180830b.cap shows a boot with microUSB power from a wall wart (from my rpi3), then a boot with the battery circuit. I left both RX and TX attached; I'll play with disconnecting them another

[beagleboard] Re: Simple schematic editor as intuitive as grease pencil on quadrule?

Thanks - I've started trying fritzing. I haven't seen where the pocket beagle is in the core parts. Do I need to do something to install it? I also have gEDA/gschem on my list. Thanks! -fek On Wednesday, August 22, 2018 at 2:08:26 PM UTC-7, Chris Green wrote: > > Fred Kerr > wrote: > > [--

[beagleboard] How can remove the write-protection on the BeagleBone ?

I'm using the Beaglebone in IoT mode with the latest debian image. I tried to modify the name of the Beaglebone disk and modifying its icon, as I need to modify start.htm, when I try to modify it or copy an image, an alert is displayed this disk is write-protected, so how can I remove this

[beagleboard] Linux Kernel failed to build: ERROR: no certificate subject alternative name matches

I am following this guide to install Linaro on my Ubuntu 18.04 machine: https://www.digikey.com/eewiki/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-ARMCrossCompiler:GCC Thanks to Robert's help, I got

[beagleboard] Need a HELP ! How to remove the write protection of Beaglebone ?

Hello, I need a help please, I want to change the name of the label of my BeagleBone when I connect it with PC and edit the file start.htm. I try that, but it have a protection of write, how can I remove this protection or have you another solution to be able writing on the beaglebone ? --

Re: [beagleboard] Need a HELP ! How to remove the write protection of Beaglebone ?

On Thu, Aug 30, 2018 at 6:41 AM Ichrak Mansour wrote: > > Hello, > I need a help please, I want to change the name of the label of my BeagleBone > when I connect it with PC and edit the file start.htm. > > I try that, but it have a protection of write, how can I remove this > protection or have

[beagleboard] Beagle bone, comms issue

I am using Node red to program the beagle bone and now not getting any data to the dashboard after connecting the DC supply along with the USB cable. Does anyone know if this would cause damage to the unit ? -- For more options, visit http://beagleboard.org/discuss --- You received this

Re: [beagleboard] Linux Kernel failed to build: ERROR: no certificate subject alternative name matches

>> > 1. It installs Linaro 6.4.1 tho I already have 7.3.1. Why does this >> > happen? >> >> How does it know you have 7.3.1 installed? > > I did the first part and get Linaro 7.3.1 instead. Testing with ${CC}gcc > succeeded, so I suppose that is the case. Am I doing it wrong? That was for

Re: [beagleboard] Linux Kernel failed to build: ERROR: no certificate subject alternative name matches

On Thursday, August 30, 2018 at 9:04:37 PM UTC+7, RobertCNelson wrote: > > > 1. It installs Linaro 6.4.1 tho I already have 7.3.1. Why does this > happen? > > How does it know you have 7.3.1 installed? I did the first part and get Linaro 7.3.1 instead. Testing with ${CC}gcc succeeded, so

Re: [beagleboard] Beagle bone, comms issue

normally not. unless there is something wrong with your grounding or power supply On 8/30/2018 5:00 AM, Shak Jamil wrote: > I am using Node red to program the beagle bone and now not getting any > data to the dashboard after connecting the DC supply along with the > USB cable. Does anyone know if

Re: [beagleboard] Linux Kernel failed to build: ERROR: no certificate subject alternative name matches

On Thu, Aug 30, 2018 at 3:48 AM not you wrote: > > I am following this guide to install Linaro on my Ubuntu 18.04 machine: > https://www.digikey.com/eewiki/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-ARMCrossCompiler:GCC > > Thanks to Robert's help, I got Linaro 7.3.1 successfully