On Sun, Jan 28, 2018 at 12:51 PM, wrote:
> Hi Robert,
>
> Same problem as Mostafa Bahrami on my side too. I've downloaded the other
> version of stretch. The file I've downloaded is ->
> "bone-debian-9.1-lxqt-armhf-2017-08-31-4gb.img"
>
> I can't see even a wlan0 device when
Hi,
I would like to run Android on PocketBeagle. I couldn’t however found a
ready image yet, nor a how-to for building the OS for this hardware. Any
help is appreciated.
Thanks!
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are
Hi Robert,
Same problem as Mostafa Bahrami on my side too. I've downloaded the other
version of stretch. The file I've downloaded is ->
"bone-debian-9.1-lxqt-armhf-2017-08-31-4gb.img"
I can't see even a wlan0 device when I do ifconfig though, that seems weird
to me. I see the following main
Good Afternoon,
I am using an image file that is converting any file system into read only,
which I understand, is basically corrupting file system. I flash the image
on the SD card and run
sudo apt-get update && sudo apt-get install vim
This is giving the following error:
[ 229.949699]
Also trying to get the "config-pin P9_12 in" to work, so followed the
instruction to upgrade the bb-cape-overlays .
Running fresh 9.1 LXQT with NH7C LCD , executing commands
sudo apt update ; sudo apt upgrade bb-cape-overlays breaks the install.
Errors were encountered while processing:
Hi
It is possible with this version beaglebone-blue to control motor stepper
driver like leadshine dm556 ?
Also for this use, machinekit can work with this board ?
Best regards.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are
Hi. I can boot my bbbw by prebuild image from beaglebone website. but i
want build my custom image. i download kernel source from
"https://github.com/beagleboard/linux.git; git repository and compile
kernel. but my problem is the wifi doesn't work with this image. how can i
do? what is the
Hi. I can boot my bbbw by prebuild image from beaglebone website. but i
want build my custom image. i download kernel source from
"https://github.com/beagleboard/linux.git; git repository and compile
kernel. but my problem is the wifi doesn't work with this image. how can i
do? what is the
Hi. I Build a Custom Image From Git repository of BBB and my Wifi did not
work. but with pre build i
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and
Could it be the on board battery is retaining the GPio confirguration from
your ROS setup?
On Thursday, January 4, 2018 at 8:51:56 AM UTC-5, George Terzakis wrote:
>
> Hello everyone,
>
> I have been using the Beaglebone Blue for over 3 months now without any
> problems until now. The board
Hi everyone
Not so long ago my board stopped *booting *(BeagleBoard Black PCB RevB5
from Antminer D3).
After power-on only power LED is up. All USER LEDs is not lighting.
I tried boot from MicroSD card, hold S2, RESET, POWER, and other button
(switch is not soldered on the PCB, see the photo)
Hi,
I'm using 2 GPS modules and 2 BBBW to build a RTK-System, it requires two
stations, a "base" station and a "rover" station.
Each station consists of one GPS module and one BBBW. The "base" needs to
send correction data to the "rover".
GPS module: Tiny RTK,
BBBW: Linux rtkbase
12 matches
Mail list logo