[beagleboard] Re: L298 and Interfacing w/ the BBB/Trying!

Hello Sir, Seth here. I wrote some new software for the item that was in question. The idea you told me earlier in this post did not click right away for me, e.g. pins are either High or Low. W/ my new software, I am running two motors now but the motors were not acting as expected and it was

Re: [beagleboard] Re: Problems using BeagleBone Black's UART

For what? using the uarts? If you're using a recent image then you don't have to mess with overlays at all. In the default configuration, you can configure pin function at runtime using the "config-pin" utility, e.g. for uart4: config-pin P9.11 uart # switch P9.11 to uart 4 rxd config-pin P9.13

Re: [beagleboard] PRUs realtime data acquisition, I2C bus and ADC

BTW, you can run iiod on your BBB and then use IIO Oscilloscope on you desktop which can connect to your BBB and display the waveforms. https://wiki.analog.com/resources/tools-software/linux-software/iio_oscilloscope

Re: [beagleboard] PRUs realtime data acquisition, I2C bus and ADC

If you are using the latest kernel, you must use u-boot overlays as the kernel capemanager as discussed in that article is no longer available. Regards, John > On May 18, 2018, at 4:57 PM, pierrick.ra...@gadz.org wrote: > > > John, > I am still working on this project. I have studied the

[beagleboard] Help setting up pocket beagle?

I downloaded the latest image on the beagleboard page, Debian 9.3 2018-01-28 4GB SD LXQT I burned it onto my microSD card and put it in the pocket beagle, then plugged the pocket beagle into a USB port on

Re: [beagleboard] Modify EEPROM on PocketBeagle through uBoot

On Fri, May 18, 2018 at 1:18 PM, Jesse Abella wrote: > Is it possible to modify the contents of the embeddedd eeprom on the > pocketbeagle? When I get into uBoot I issue the command: > => i2c md 0x50 00.2 0x20 > : aa 55 33 ee 41 33 33 35 50 42 47 4c 30 30 41 32

[beagleboard] Modify EEPROM on PocketBeagle through uBoot

Is it possible to modify the contents of the embeddedd eeprom on the pocketbeagle? When I get into uBoot I issue the command: => i2c md 0x50 00.2 0x20 : aa 55 33 ee 41 33 33 35 50 42 47 4c 30 30 41 32.U3.A335PBGL00A2 0010: 31 37 34 34 47 50 42 31 31 35 39 38 ff ff ff ff

[beagleboard] Re: Cannot SSH to BBB anymore

yassyass wrote: > [-- multipart/alternative, encoding 7bit, 141 lines --] > > [-- text/plain, encoding quoted-printable, charset: UTF-8, 61 lines --] > > Thanks for that Chris, an arp -a does not return a beaglebone default IP of > 192.168.6.2 on the LAN. But is