On Sep 28, 2013 3:36 PM, wrote:
>
> Hum, so where is the C file for BBB init?
Its dead Jim... Everything going forward is device trees.. That file I
previously linked it is the c board file replacement.
>
> Could you confirm me that user led0 pin number is 1*32+21 so 53?
>
> thanks for your an
Hum, so where is the C file for BBB init?
Could you confirm me that user led0 pin number is 1*32+21 so 53?
thanks for your answer
Best!
Le samedi 28 septembre 2013 10:55:56 UTC-4, RobertCNelson a écrit :
>
> On Sat, Sep 28, 2013 at 2:10 AM, >
> wrote:
> > According to BBB user manual p61 and
On Sat, Sep 28, 2013 at 2:10 AM, wrote:
> According to BBB user manual p61 and BBB schematic:
> led user0 is connected on PIN GPIO1_21, so his pin number should be
> 1*32+21=53.
>
> But in arch/arm/mach-omap2/board-omap3beagle.c his number is 150, and led
> user1 pin number is 149;
BeagleBone Bl
According to BBB user manual p61 and BBB schematic:
led user0 is connected on PIN GPIO1_21, so his pin number should be
1*32+21=53.
But in arch/arm/mach-omap2/board-omap3beagle.c his number is 150, and led
user1 pin number is 149;
static struct gpio_led gpio_leds[] = {
{
.name = “beagleboard:
