I was getting the same error changing from DHCP to manual
Just in case anyone else has this issue, I still had to set the gateway to
0.0.0.0 if it wasn't used
root@beaglebone:/# connmanctl services
*AO Wiredethernet_985dad474bf3_cable
Error:
root@beaglebone:/# connmanctl config
Pleae have a look at
https://groups.google.com/d/topic/beagleboard/b8W1W3z_xYA/discussion
regards
Il giorno lunedì 24 settembre 2018 16:54:04 UTC+2, Wei Shi ha scritto:
>
> Hi, I'm trying to bring up the PRU on my BeagleBone Black. I was able to
> get it up using UIO method, but failed with
Thank you, Filippo! It was the exact same issue you mentioned in your post.
I tried your solution and it worked like charm.
However, I have one more question. I actually tried to start the PRU using
"sudo
echo 'start' > /sys/class/remoteproc/remoteproc1/state" and it always
failed with error
Hi, I'm trying to bring up the PRU on my BeagleBone Black. I was able to
get it up using UIO method, but failed with PRU_RPROC driver.
The pru-software-support-package example compiled OK. I tried
PRU_Direct_Connect0
and PRU_RPMsg_Echo_Interrupt1. I copied generated .out file to
I think they drop out this product
On Tuesday, September 22, 2015 at 3:30:05 AM UTC+5:30, roman.p...@gmail.com
wrote:
>
> Hristo,
>>
>
> Is this camera board still available and supported?
>
> I could not find any places where I can order it, 0 listings on eBay and
> no links at Visensi.
>
>
This probably explained why my "sudo echo" got Permission denied.
On Monday, September 24, 2018 at 11:31:51 PM UTC+8, Dennis Lee Bieber wrote:
>
> On Mon, 24 Sep 2018 08:17:17 -0700 (PDT), Wei Shi
> > declaimed the
> following:
>
> >However, I have one more question. I actually tried to start
I am trying the PRU_RPMsg_Echo_Interrupt1 example in
pru-software-support-package
with BeagleBone Black. The code builds ok. It was successfully loaded and
started on PRU1. The state under /sys/class/remoteproc/remoteproc2 shows
"running".
However, when I start the rpmsg_pru, I am not getting
Thanks for reply :)
I am using rev B with 2GB eMMC. Now I am using the newest version boot from
SD card.
Info from version.sh:
debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
[sudo] password for debian:
git:/opt/scripts/:[d837f2b02f44fabe16353fd1226bb1f64e847c93]
On Mon, Sep 24, 2018 at 3:13 PM Krzysztof Śmiałek
wrote:
>
> Thanks for reply :)
>
> I am using rev B with 2GB eMMC. Now I am using the newest version boot from
> SD card.
>
>
> Info from version.sh:
>
> debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
> [sudo] password for debian:
>
Hi,
on the eMMc I have installed this one:
https://debian.beagleboard.org/images/BBB-eMMC-flasher-debian-7.5-2014-05-14-2gb.img.xz
Becouse I didn't find any newer for 2gb version. It will be easy to come
bac this changes? :)
sudo dd if=/dev/zero of=/dev/mmcblk1 bs=1M count=100
Becouse when I last
On Mon, Sep 24, 2018 at 3:55 PM Krzysztof Śmiałek
wrote:
>
Okay the reporting is fixed:
bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot
2018.09-2-g0b54a51eee]:[location: dd MBR]
bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot
2014.04-00014-g47880f5]:[location: fatfs
Hello Again Sir,
I was thinking about the course of action to take on this Cape, the
MotorCape. I say leave it as is. It is okay w/ me at least. The vdd_5v is
fine. Although, "more complicated," it is simple to deal w/.
Typing up a service for the Debian Distro from what is available online is
I used this and BBB don't want to boot after reboot;/ so the same situation
like yesterday with this comand. Without card the same. Pressing boot buton
didnt help. Hmm...
pon., 24 wrz 2018 o 22:37 Krzysztof Śmiałek
napisał(a):
> Hi,
> on the eMMc I have installed this one:
>
>
On Mon, Sep 24, 2018 at 3:44 PM Krzysztof Śmiałek
wrote:
>
> I used this and BBB don't want to boot after reboot;/ so the same situation
> like yesterday with this comand. Without card the same. Pressing boot buton
> didnt help. Hmm...
>
> pon., 24 wrz 2018 o 22:37 Krzysztof Śmiałek
>
Ok, so what should I do? Reflash emmc to old one once again? When I was
testing yesterday after reflashing the pwm was working on this old soft but
probably it will be better if i can use new version of soft.
24.09.2018 10:48 PM "Robert Nelson" napisał(a):
On Mon, Sep 24, 2018 at 3:44 PM
Hi Guys,
my problem is that I need to "switch" between using the display cape and
the HDMI output of my BeagleBone Black Rev C. I can't always detach the
Display Cape when I want to use HDMI because I plan on fitting my BBB in a
permanent case.
Is there a possibility to use the HDMI output
Hello,
I want to use PWM pins by Adafruit in my BBB but I have got some problems.
Below some info about my soft:
root@beaglebone:~# cat /etc/dogtag
BeagleBoard.org Debian Image 2018-06-17
root@beaglebone:~# cat /etc/debian_version
9.5
root@beaglebone:~# uname -a
Linux beaglebone 4.14.49-ti-r54
Hello friend. I think maybe is too late for you, but if someone is alredy
looking for information about that, i took the solution.
In the bonescript library i didn't find a function to append in a text
file, so i used the function appendFile(), from node.js library. To use
this function, we
On Mon, Sep 24, 2018 at 2:23 PM wrote:
>
> Hello,
> I want to use PWM pins by Adafruit in my BBB but I have got some problems.
> Below some info about my soft:
>
>
> root@beaglebone:~# cat /etc/dogtag
> BeagleBoard.org Debian Image 2018-06-17
> root@beaglebone:~# cat /etc/debian_version
> 9.5
>
On Mon, Sep 24, 2018 at 2:22 PM Marco Liess wrote:
>
> Hi Guys,
>
> my problem is that I need to "switch" between using the display cape and the
> HDMI output of my BeagleBone Black Rev C. I can't always detach the Display
> Cape when I want to use HDMI because I plan on fitting my BBB in a
20 matches
Mail list logo
