Thanks for reply :) I am using rev B with 2GB eMMC. Now I am using the newest version boot from SD card.
Info from version.sh: debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh [sudo] password for debian: git:/opt/scripts/:[d837f2b02f44fabe16353fd1226bb1f64e847c93] eeprom:[A335BNLT00A53002BBBK9610] model:[TI_AM335x_BeagleBone_Black] dogtag:[BeagleBoard.org Debian Image 2018-06-17] bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2018.03-00002-gac9cce7c6a]:[location: dd MBR] kernel:[4.14.49-ti-r54] nodejs:[v6.14.4] uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo] uboot_overlay_options:[enable_uboot_cape_universal=1] pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>] pkg:[bb-cape-overlays]:[4.4.20180914.0-0rcnee0~stretch+20180914] pkg:[bb-wl18xx-firmware]:[1.20180517-0rcnee0~stretch+20180517] pkg:[kmod]:[23-2rcnee1~stretch+20171005] pkg:[roboticscape]:[0.4.4-git20180608.0-0rcnee0~stretch+20180609]:[GOT_REPLACED_BY_NEXT] WARNING:pkg:[librobotcontrol]:[NOT_INSTALLED] pkg:[firmware-ti-connectivity]:[20170823-1rcnee1~stretch+20180328] groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep admin spi tisdk weston-launch xenomai] cmdline:[console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p1 rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] dmesg | grep pinctrl-single [ 1.075942] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 dmesg | grep gpio-of-helper [ 1.077153] gpio-of-helper ocp:cape-universal: ready END THX, KS pon., 24 wrz 2018 o 21:36 Robert Nelson <robertcnel...@gmail.com> napisał(a): > On Mon, Sep 24, 2018 at 2:23 PM <krzysztof.jan.smia...@gmail.com> wrote: > > > > Hello, > > I want to use PWM pins by Adafruit in my BBB but I have got some > problems. Below some info about my soft: > > > > > > root@beaglebone:~# cat /etc/dogtag > > BeagleBoard.org Debian Image 2018-06-17 > > root@beaglebone:~# cat /etc/debian_version > > 9.5 > > root@beaglebone:~# uname -a > > Linux beaglebone 4.14.49-ti-r54 #1 SMP PREEMPT Fri Jun 15 22:14:13 UTC > 2018 armv7l GNU/Linux > > root@beaglebone:~# pip install Adafruit_BBIO > > Requirement already satisfied: Adafruit_BBIO in > /usr/local/lib/python2.7/dist-packages/Adafruit_BBIO-1.0.10-py2.7-linux-armv7l.egg > > This is actually pre-installed. ;) > > > root@beaglebone:~# cat /sys/devices/platform/bone_capemgr/slots > > 0: PF---- -1 > > 1: PF---- -1 > > 2: PF---- -1 > > 3: PF---- -1 > > You have an old version of u-boot in the eMMC: > > Please run this script to help verify where it's located so we can remove > it.. > > sudo /opt/scripts/tools/version.sh > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAK-qOpDkts6Pk_ZckBNdGUSA6QT%2BXKRQFO3kvZkrVt0u%3Dw0vOQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
