Hi Robert,
You are do a great job for the Beaglebone community.
I am stuck in one situation, I am using beaglebone green BBG2 board with
linux kernel 3.8.13-bone80, I want to connect Touch LCD through the
seeedstudio cape, but I don't get /dev/fb0 framebuffer in the kernel image.
I even download
Robert is a Jewel among shiny pebbles !
On 4/13/2018 8:26 AM, Robert Nelson wrote:
> On Fri, Apr 13, 2018 at 10:23 AM, Bobbi N Sean Donovan
> wrote:
>> Great Thanks!!
>>
>> I wish all technical support was this immediate.
> That's because everyone on this list is a volunteer... ;)
>
> Regards,
>
On Fri, Apr 13, 2018 at 10:23 AM, Bobbi N Sean Donovan
wrote:
> Great Thanks!!
>
> I wish all technical support was this immediate.
That's because everyone on this list is a volunteer... ;)
Regards,
--
Robert Nelson
https://rcn-ee.com/
--
For more options, visit http://beagleboard.org/discus
Great Thanks!!
I wish all technical support was this immediate.
Sean
On Friday, April 13, 2018 at 8:18:37 AM UTC-7, RobertCNelson wrote:
>
> On Fri, Apr 13, 2018 at 10:14 AM, Bobbi N Sean Donovan
> > wrote:
> > As it is plain to see, I don't know what the hell I am doing. I
> suspected
> >
On Fri, Apr 13, 2018 at 10:14 AM, Bobbi N Sean Donovan
wrote:
> As it is plain to see, I don't know what the hell I am doing. I suspected
> the "56" was wrong, but I am blindly following directions at this point just
> trying to get this out as it is becoming a production issue. I do
> appreciat
As it is plain to see, I don't know what the hell I am doing. I suspected
the "56" was wrong, but I am blindly following directions at this point
just trying to get this out as it is becoming a production issue. I do
appreciate all the help. I'll go back and rebuild per your instruction
belo
On Fri, Apr 13, 2018 at 9:54 AM, Bobbi N Sean Donovan
wrote:
>
> Well, I performed the Kernel update yesterday. It appeared to be
> successful, but after a reboot to the SD Card, still same failure. Not sure
> what I did wrong. Attached is the log file of the update. Thank you again
> for all
Robert, thanks for the feedback. As you have probably already guessed, I
am new to the board. We are using it as an embedded controller so I am
feeling my way through the OS. I haven't dealt with Linux based systems in
over 20 years.
Have a wonderful day.
Respectfully,
Sean Donovan
On Wedn
On Wed, Apr 11, 2018 at 5:18 PM, Bobbi N Sean Donovan
wrote:
> Robert, thank you so much for the reply. I followed your link below on the
> doc on how to fix the image and I get the following error +Failed dependency
> check. I am trying to do this to the SDCard that the BBB booted from.
>
> Any
Robert, thank you so much for the reply. I followed your link below on the
doc on how to fix the image and I get the following error *+Failed
dependency check*. I am trying to do this to the SDCard that the BBB
booted from.
Any further suggestions?
Here is a copy of the Putty Dump
debian@bea
On Wed, Apr 11, 2018 at 1:41 PM, wrote:
> I am trying to rollback the Debian image on my Beaglebone Black Rev C
> (Embest) from the image that shipped on it on the board Debian 8.3 Image
> 2016-01-24 kernel 4.1.15-ti-rt-43 to Debian 7.8 image 2015-03-01 kernel
> 3.8.13-bone70 . I downloaded both
11 matches
Mail list logo
