Re: BIND 9.8.1-P1: 'make test' fails
On 22 Nov 2011, at 11:24, Niall O'Reilly wrote: Since quite a few years, I habitually run 'make test' after building BIND from sources. I'me seiing a failure with 9.8.1-P1, and wonder whether anyone else is also. [By way of putting this to bed, at last ...] Updating the Perl module Net::DNS to a recent version seems to be what is needed to make the test which was failing (labelled 'xfer') run successfully. I don't know the cut-off point between 'old' and 'recent' version of Net::DNS. I've had success with 0.65 and 0.66; current is 0.72. An 'old' version will cause the 'xfer' test to fail in BIND releases subsequent to 9.8.1-P1, including current releases. Best regards, /Niall ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
Re: BIND 9.8.1-P1: 'make test' fails
On Aug 20, 2013, at 5:11 AM, Niall O'Reilly niall.orei...@ucd.ie wrote: On 22 Nov 2011, at 11:24, Niall O'Reilly wrote: Since quite a few years, I habitually run 'make test' after building BIND from sources. I'me seiing a failure with 9.8.1-P1, and wonder whether anyone else is also. [By way of putting this to bed, at last ...] Updating the Perl module Net::DNS to a recent version seems to be what is needed to make the test which was failing (labelled 'xfer') run successfully. I don't know the cut-off point between 'old' and 'recent' version of Net::DNS. I've had success with 0.65 and 0.66; current is 0.72. An 'old' version will cause the 'xfer' test to fail in BIND releases subsequent to 9.8.1-P1, including current releases. There is a mailing list for Net::DNS. List-Subscribe: https://www.nlnetlabs.nl/mailman/listinfo/net-dns-users, mailto:net-dns-users-requ...@nlnetlabs.nl?subject=subscribe That said, there was a discussion last December about what has changed since Net::DNS was taken over by a new maintainer, meaning post-0.68. A small number of quite disruptive changes were made in 0.69. Regards, Chris Buxton ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
Re: BIND 9.8.1-P1: 'make test' fails
On 20 Aug 2013, at 15:08, Chris Buxton wrote: There is a mailing list for Net::DNS. List-Subscribe: https://www.nlnetlabs.nl/mailman/listinfo/net-dns-users, mailto:net-dns-users-requ...@nlnetlabs.nl?subject=subscribe That said, there was a discussion last December about what has changed since Net::DNS was taken over by a new maintainer, meaning post-0.68. A small number of quite disruptive changes were made in 0.69. Thanks, Chris. For problem at hand, the break-point of interest is somewhere between 0.31 and 0.65. 8-) Niall ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
RE: BIND 9.8.1-P1:'make test' fails
On No.v 22, 2011 Niall O'Reilly wrote: Since quite a few years, I habitually run 'make test' after building BIND from sources. I'me seiing a failure with 9.8.1-P1, and wonder whether anyone else is also. I got exactly the same error messages when testing xfer as well. We are running Linux Slamd64 12.0.0 . Our current bind is 9.6.1-P1. I tried upgrading to bind-9.6.1-ESV-R5-P1 . Compilation, i.e. make, went well but 'make test' failed because that single FAIL in xfer . The same story with bind-9.8.1-P1: compilation OK but 'make test' failed. We are stuck since we cannot go ahead with installing any new version when the test fails. Appreciate very much all your help. Tan ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
Re: BIND 9.8.1-P1:'make test' fails
In message pine.lnx.4.64.1201311256380.12...@alcor.concordia.ca, TAN BUI writ es: On No.v 22, 2011 Niall O'Reilly wrote: Since quite a few years, I habitually run 'make test' after building BIND from sources. I'me seiing a failure with 9.8.1-P1, and wonder whether anyone else is also. I got exactly the same error messages when testing xfer as well. We are running Linux Slamd64 12.0.0 . Our current bind is 9.6.1-P1. I tried upgrading to bind-9.6.1-ESV-R5-P1 . Compilation, i.e. make, went well but 'make test' failed because that single FAIL in xfer . The same story with bind-9.8.1-P1: compilation OK but 'make test' failed. We are stuck since we cannot go ahead with installing any new version when the test fails. Appreciate very much all your help. Tan You havn't show the test output for the xfer tests but a lot of the test are particularly timing sensitive. When we find one like that we fix the test. The xfer system test does have some timing sensitivity. You can re-run the individual system test like this: cd bin/tests/system; sh run.sh xfer If you want us to have a look this in more detail open a ticket by emailing bind9-b...@isc.org with the output of the system test, then tar up bin/tests/system/ixfr and upload it via: https://pandora.isc.org/ Mark -- Mark Andrews, ISC 1 Seymour St., Dundas Valley, NSW 2117, Australia PHONE: +61 2 9871 4742 INTERNET: ma...@isc.org ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
Re: BIND 9.8.1-P1:'make test' fails
On Tue, Jan 31, 2012 at 01:13:54PM -0500, TAN BUI wrote: On No.v 22, 2011 Niall O'Reilly wrote: Go back just a bit further in the archive to my post on 2011-11-17 (16th in my TZ) Subject: Re: Can't compile bind 9.8.1-P1 on Solaris. Sorry, I should have changed the subject to indicate Slackware, but I was seeing the same problem as that. Since quite a few years, I habitually run 'make test' after building BIND from sources. I'me seiing a failure with 9.8.1-P1, and wonder whether anyone else is also. I got exactly the same error messages when testing xfer as well. We are running Linux Slamd64 12.0.0 . Our current bind is 9.6.1-P1. I tried upgrading to bind-9.6.1-ESV-R5-P1 . Compilation, i.e. make, went well but 'make test' failed because that single FAIL in xfer . The same story with bind-9.8.1-P1: compilation OK but 'make test' failed. We are stuck since we cannot go ahead with installing any new version when the test fails. -- http://rob0.nodns4.us/ -- system administration and consulting Offlist GMX mail is seen only if /dev/rob0 is in the Subject: ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
Re: BIND 9.8.1-P1: 'make test' fails
On 22/11/11 18:10, /dev/rob0 wrote: Is this a manifestation of the same issue as brought up last week? https://lists.isc.org/pipermail/bind-users/2011-November/085593.html I don't think so. I can compile without problem. I see a failure during 'make test' processing, and only for a specific RH release (RHEL ES 3.4) on real i686. The only other RH release which is conveniently available to me is 6.0 on real or VMware guest x86_64, so there is plenty of scope for ignored intermediate data points. If I have occasion to explore further, I'll report anything which seems interesting. /Niall ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
BIND 9.8.1-P1: 'make test' fails
Since quite a few years, I habitually run 'make test' after building BIND from sources. I'me seiing a failure with 9.8.1-P1, and wonder whether anyone else is also. Relevant log fragment is shown below. /Niall S:xfer:Tue Nov 22 11:12:07 GMT 2011 T:xfer:1:A A:System test xfer I:testing basic zone transfer functionality I:testing TSIG signed zone transfers I:reload servers for in preparation for ixfr-from-differences tests I:ns1 server reload successful I:ns2 server reload successful I:ns3 server reload successful I:ns6 server reload successful I:ns7 server reload successful I:updating master zones for ixfr-from-differences tests I:ns1 server reload successful I:ns2 server reload successful I:ns6 server reload successful I:ns7 server reload successful I:testing ixfr-from-differences yes; I:testing ixfr-from-differences master; (master zone) I:testing ixfr-from-differences master; (slave zone) I:testing ixfr-from-differences slave; (master zone) I:testing ixfr-from-differences slave; (slave zone) I:testing that incorrectly signed transfers will fail... I:initial correctly-signed transfer should succeed I:ns4 server reload successful I:failed I:unsigned transfer I:bad keydata I:partially-signed transfer I:unknown key I:incorrect key I:exit status: 1 R:FAIL E:xfer:Tue Nov 22 11:12:40 GMT 2011 ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
Re: BIND 9.8.1-P1: 'make test' fails
On Tuesday 22 November 2011 05:24:14 Niall O'Reilly wrote: Since quite a few years, I habitually run 'make test' after building BIND from sources. I'me seiing a failure with 9.8.1-P1, and wonder whether anyone else is also. Is this a manifestation of the same issue as brought up last week? https://lists.isc.org/pipermail/bind-users/2011-November/085593.html Note, Solaris in the Subject: line notwithstanding, I had the same problem under Linux. Relevant log fragment is shown below. /Niall S:xfer:Tue Nov 22 11:12:07 GMT 2011 T:xfer:1:A A:System test xfer I:testing basic zone transfer functionality I:testing TSIG signed zone transfers I:reload servers for in preparation for ixfr-from-differences tests I:ns1 server reload successful I:ns2 server reload successful I:ns3 server reload successful I:ns6 server reload successful I:ns7 server reload successful I:updating master zones for ixfr-from-differences tests I:ns1 server reload successful I:ns2 server reload successful I:ns6 server reload successful I:ns7 server reload successful I:testing ixfr-from-differences yes; I:testing ixfr-from-differences master; (master zone) I:testing ixfr-from-differences master; (slave zone) I:testing ixfr-from-differences slave; (master zone) I:testing ixfr-from-differences slave; (slave zone) I:testing that incorrectly signed transfers will fail... I:initial correctly-signed transfer should succeed I:ns4 server reload successful I:failed I:unsigned transfer I:bad keydata I:partially-signed transfer I:unknown key I:incorrect key I:exit status: 1 R:FAIL E:xfer:Tue Nov 22 11:12:40 GMT 2011 -- Offlist mail to this address is discarded unless /dev/rob0 or not-spam is in Subject: header ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
Re: BIND 9.8.1-P1: 'make test' fails
On 11/22/2011 3:24 AM, Niall O'Reilly wrote: Since quite a few years, I habitually run 'make test' after building BIND from sources. I'me seiing a failure with 9.8.1-P1, and wonder whether anyone else is also. All tests passed for me on FreeBSD, FWIW. -- We could put the whole Internet into a book. Too practical. Breadth of IT experience, and depth of knowledge in the DNS. Yours for the right price. :) http://SupersetSolutions.com/ ___ Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe from this list bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
