I'd think the optical way is more precise since the shaft will be turning
faster and faster the more tape you pull out, just like a standard tape.
Point is, it doesn't reely seem it's worth the money.
Matthys.
You cannot measure the strength of a battery accuratly with a multi meter.
Matthys
- Original Message -
From: Dale Leavens [EMAIL PROTECTED]
To: blindhandyman@yahoogroups.com
Sent: Wednesday, August 08, 2007 1:48 AM
Subject: Re: [BlindHandyMan] NEW! EZ Test Battery Tester
Isn't that
Hi, not to be a damp cloth here, but this wont work. Water chemistry is
a precise science and require precise measurements. I researched this
for the last two years and haven't find a affordable tool that blind
pool owners can use. The only electronic instruments out there capable
of doing
Hi list,
I'm having trouble where my toilet causes the shower
and bath to gurgle when it is flushed. No backing up or anything nasty
like that, but still maybe the start of problems?
I've checked the breather valve outside the house, but couldn't see anything
wrong there.
I've used some
One of the best all purpose tools that fits in your pocket. I've used
mine extensively over the last 12 years, and all it needs is maybe a
little sharpening. It carries a life long guarantee and usually you'll
find a shop that will service it for free. Because the knife blade is
serrated,
Hi rj,
If the system is in good shape, run a hose down the air vent and flush
it out.
I tried that also. no luck.
mailto:rjf1%40velocity.net- Original Message -
From: M. Terblanche
To: blindhandyman@ yahoogroups. com
mailto:blindhandyman%40yahoogroups.com
Sent: Wednesday, April
Great progress. Maybe they can send a team over to South Africa to see
if they can cope with our famous taxis...
Matthys
Tom Fowle wrote:
Dan,
some real progress here, interesting.
have you instructed them to detect blind folks, and when found,
to stop immediately, beep the horn and race
None that I know of. Replace the pipes, it's easey enough. cut them
where the cracs stop, and use two pvc joins, a little sleave that fits
around the pipe, and pvc cement or pvc glue, adding two peaces of new
pipes for the cracked part. Leave for about 12 hours before allowing
water to flow
