Hi
A. To transfer your 8mm/Hi8/miniDV/Digital8 tape to a DVD Recorder, just
follow the following steps if using either standard Composite or S-video
connections
on your camcorder and DVD recorder.
1. Make sure you plug the camcorder directly into the DVD Recorder and NOT
the TV. In addition, yo
Well you did not say where this dent was. If you can get behind it as in
inside the car a block of wood and a hammer will work fine. If inside is not a
option sometimes a rubber sink plunger can do wonders. A lot depends on the
size of the dent. Water or oil on the rubber to insure a good se
I have two. One was cheep, About 20 dollars I think. It didn't work worth a
damn so I got a more expensive one, about 80 dollars, included a laser
level. Much better. Both are Black and Decker.
Regards.
Max. K 4 O D S.
Email: [EMAIL PROTECTED]
Transistor site http://www.funwithtransistors
HI I would like to know the answer to that my self. I have done some video
production using Ulead movie factory, but it is not screen reader friendly at
all, but it is a fine editing and video rendering program. Don
- Original Message -
From: Lenny McHugh
To: blind handym
Hi,
Does anyone know hat computer hardware/software is needed to make a dvd from a
camcorder that only has av cables?
My daughter just purchased a Panasonic gs29 camcorder. It uses mini dv tapes
and the only output is the av cable with the red, white and yellow connectors.
She would like to use m
I don't remember seeing that message but I do have an URL with some
information not blind specific.
Try this:
http://www.comparecellular.com/compare_phones_details.asp?l=&c=17&PhoneID=519
Hope this is helpful.
What deal is CNIB offering? I had not heard anything but it doesn't look
like I car
hi sears has them for about $10
i have one and it works fine.
jim
At 08:33 PM 12/20/2006, you wrote:
>Hi all,
>
>I'm going to be doing some paneling in my basement this winter. Does
>anyone know of an audible stud finder or some other accessible device
>for this purpose? If you have used such a de
bylek
__ NOD32 1932 (20061220) Information __
This message was checked by NOD32 antivirus system.
http://www.eset.com
[Non-text portions of this message have been removed]
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbradio-arc
I just purchased one at my local hardware store, it was about $20.00. It
runs on a 9V battery.
Thanks, Jeff
-Original Message-
From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED]
Behalf Of Edward Przybylek
Sent: Wednesday, December 20, 2006 8:33 PM
To: BlindHandyManList
Subject:
Hi Ed
Measure Tech Plus Stud Sensor
Review
Whether you are setting up shop, hanging a heavy picture or just need to
know the location of a wall stud, then a stud sensor almost becomes a
necessity
if your rooms or shop are covered with drywall, or similar material and
the studs are not visible. Yo
Hi all,
I'm going to be doing some paneling in my basement this winter. Does
anyone know of an audible stud finder or some other accessible device
for this purpose? If you have used such a device, would you please
let me know the name of the device and what you thought of it. Thanks.
Take c
hi their my mum dented the car bringing it threw the gate because some fool
parked in the way how can I remove them?
[Non-text portions of this message have been removed]
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbradio-archives/
Wow! that is fast. Thanks for the info.
Jennifer
[Non-text portions of this message have been removed]
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbradio-archives/handyman/
The Pod Cast address for the Blind Handy Man Show is.
h
Hi
Generally the drying time is printed on the side of the spray can.
Get your Son to read it to you.
If you can smell thinners it should not take long if you have it in a
breeze area.
touch them after about half an hour and see if they are still sticky.
Ray
Fr
Hi Jennifer!
I would wait at least twenty minutes to half an hour before handling the
items. The drying time all depends on the type of paint used, how thick he
put it on and the heat and humidity factor in your home. If it is warm and
dry in your house it may be dry within ten minutes but would l
Hi all. A week or so ago someone on this list bought a Samsung A640 cell
phone with text to speech. I was wondering if they could contact me off list
at [EMAIL PROTECTED] and let me know how that phone is working out for them.
The CNIB and Bell Canada has a plan put together up here that is making
I just had my son spray paint some ornaments for me. About how long should I
wait for them to be dry enough to handle?
Jennifer
[Non-text portions of this message have been removed]
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbra
can you mix finishing oials to get different afeckts?
[Non-text portions of this message have been removed]
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbradio-archives/handyman/
The Pod Cast address for the Blind Handy Man Show is.
h
Hi Geoff
Thank you for the complement I do go to a lot of trouble in finding
interesting articles and then editing them so they read ok with our
screen readers.
We have on our blind handy man files area thanks to Dave an ever
growing reference library of some interesting articles on many subject
Hi
Well it would depend on what you are trying to screw together but here
is a screw guide taken off our Blind Handy Man Files area.
Screw Comparison Guide.
Use this Screw Comparison Chart to help choose the right screw that best
fits your application. Compare Screw Heads, Screw Threads and siz
Thanks.
Regards.
Max. K 4 O D S.
Email: [EMAIL PROTECTED]
Transistor site http://www.funwithtransistors.net
Vacuum tube site: http://www.funwithtubes.net
Music site: http://www.maxsmusicplace.com
To subscribe to the fun with tubes group send an email to,
[EMAIL PROTECTED]
- Original Mess
way to go max!
You just saved your selves a chyunk of money and made your self feel good in
two ways.
congrats
Tom
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbradio-archives/handyman/
The Pod Cast address for the Blind Handy Man Sho
My personal choice would be self tapping. So far as what is best that seems
to be personal opinion.
David Ferrin
I believe that tomorrow is another day, and I'll probably screw that one up
too.
- Original Message -
From: "carlhickson" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, December
what is better self tapping or normal twist screws?
[Non-text portions of this message have been removed]
To listen to the show archives go to link
http://acbradio.org/handyman.html
or
ftp://ftp.acbradio.org/acbradio-archives/handyman/
The Pod Cast address for the Blind Handy Man Show is.
htt
some will say 800-1500 paper.
I use an orbital and though it goes through paper faster, it moves faster
thus it tires the hand slower and gives a finer feel.
This is deceiving in the beginning. but as you get up past the 1200's you
use more and more paper and can get a really nice smooth.
Wipe fr
Good deal Geoff, as I'm not a stainer either but I was wondering about it
from the point of view of a total. I agree that Ray's information as usual
is right on target. The man must put some serious time in to looking up all
of this stuff, and he really enjoys it from what he's told me on skyp
have already bought it. actually designing a circuit board for someone with
a visual impairment is incredibly tricky. been there done it and got the burns
lol hehe
you can find that kind of kit either by buying from the moog website or from
any music store who can supply it. just search ove
27 matches
Mail list logo
