Hey Larry,
Please send me the recipe of the Devil Dog BBQ Ribbs.
See ya,
Scooter
Contact me at:
Donnie Parrett
1956 Asa Flat Road
Annville, KY 40402
Home # 606-364-3321
Cell # 606-438-2557
Church # 606-364-PRAY
Email [EMAIL PROTECTED]
-Original Message-
From:
Hey my gas is regulated and the flame is not high enough. I have a tapid
Stove. I think that they is supposed to be a screw that you can turn to
regulate this but all suggestions appreciated. Barbara
[EMAIL PROTECTED]
- Original Message -
From: Don
To: blindhandyman@yahoogroups.com
Kentucky school for the blind used to make it.
I've been told they have discontinued that.
places like
thenewvisionstore.com
sell a very similar stuff.
On Fri, 2 Mar 2007, Lenny McHugh wrote:
Does anyone know where I can purchase Hi Marks in the Us? In the past I used
and really liked this
unfortunately, this is a Maxi product.
The real Hi Marks were a thicker material that didn't run. I've had this
before I swore off buying from them for their unethical practices and both
the black and the white were runny. So I couldn't blame it on the ink
altering the ethers.
The material I
Hi :)
If you have one burner running, and turn on a SECOND burner, does the
flame on the FIRST burner drop? If not, it's not the
regulator. If the regulator's stuck, when you turn on the second burner,
the pressure drops and burner 1's flame will drop. The more burners you turn
on, the lower
Your post aroused my curiosity so I got my bottle out. I marked the number 5
key here on my phone (just for something to test on. It definatly doesn't seem
as thick as it did when I first used it, years ago,) the mark doesn't have the
nice rounded feel, it kind of flattened a bit. I am not
question; by messing with this regulator, is there a chance that the dial
for setting the oven temperature will loose it's calibration? Another
words, if you want to set your oven temperature at 350 degrees, and by
turning up or down the regulator, wouldn't that either lower or higher the
Aloha all,
It is possible to find the email address for the person who sent a
message by going to the top of a
message. It is in the From: box.
Betsy
At 07:08 PM 3/4/2007, you wrote:
Larry
You did not provide your email.
Send recipe to
mailto:robertjmoore%40earthlink.net[EMAIL PROTECTED]
No. The oven dial is actually a thermostat. When the oven temperature reaches
the selected setting temperature, the thermostat senses the temperature of the
oven and turns the gas off. After the gas is off, the oven will slowly start to
drop in temperature. The thermostat will sense the drop
Hi,
I just got a CO and smoke detector. Is the batterry life on a CO unit
different from that of a simple smoke detector?
Will it be a year, or 6 months? Or does it depend on make?
Thanks
On Fri, 2 Mar 2007, Dale Leavens wrote:
I am not sure about what it is you are smelling but most all
Don't know if this a window or Jaws key, but you can find the address of a
person by holding down the alt key+1
- Original Message -
From: Betsy Whitney, Dolphin Press
To: blindhandyman@yahoogroups.com
Sent: Monday, March 05, 2007 11:31 AM
Subject: RE: [BlindHandyMan] gas
right now they are reduced in price to $36.95 canadian (your guess is as
good as mine) and Bob Gadd is the guy to speak with.
This info is all valid as of this posting, and the continuity tester is
said to be louder than the standard, which is what I require.
On Sun, 4 Mar 2007, Ricque wrote:
wiring speakers out of phase can make them sound like crap, but it won't
hurt the radio or speakers any. Although, for best long term results, it
is best to always wire them correctly when new. The, initialization of the
wire will be correct. I've done thousands of hours of listening on this
Maybe what I had was onld on their shelves and that is why my performance
was runny also.
I eventually used the 3 bottles of black to air tight some speakers box
fronts. I got a guy to put in about 4 layers of it after the fronts were
screwed intight.
:)
On Mon, 5 Mar 2007, NLG wrote:
Your
Thanks for all the good feedback it is helpful but my nain question if any
one knows is spasifically is, about the physical caricteristics of the wires
in the truck itself. Will one feel thinner than the other or will I have to
have some one sighted tell me the colors.
If they are for example one
will this stuff make a good cawk where a patio of concrete meets the stone=
house? Will it crack with expansion and contraction? In place of a latex
strip?
Will it mix well with patch filler? Can it be poured and set in forms with=
patch filler, where ordering such small amounts of concrete
Hi Spiro
We used it to seal the concrete before painting it with concrete paint.
I am going to use it to seal two counter tops where I will cut out for the
sinks to seal it against water penetration before sealing down the sinks.
No I am not using bond Crete for the seals under the sinks. .
I
The wires will feel the same. However, there will be some sort of feelable
difference concerning the connector. It will either have opposite connectors
for each wire (female, male). Or, it could have the plastic connector keyed in
some way. Sometimes there is a slot over one of the
Mic Thanks
I think that is all the info that I will need.
-Original Message-
From: blindhandyman@yahoogroups.com [mailto:[EMAIL PROTECTED]
Behalf Of Mick
Sent: Monday, March 05, 2007 3:29 PM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] wiring speakers in my pickup
The
Yeah that was my plan, but my wife wouldn't buy into it.
-Original Message-
.From: Dan Rossi[EMAIL PROTECTED]
.Sent: 3/5/07 3:02:07 PM
.To: blindhandyman@yahoogroups.comblindhandyman@yahoogroups.com
.Subject: Re: [BlindHandyMan] Door latch repair
.
.You could put really strong springs on
What I do is take the cold chisel and put it flat against the inside of the
striker plate and tap the chisel away from the door jam.
- Original Message -
From: William Stephan
To: blindhandyman@yahoogroups.com
Sent: Monday, March 05, 2007 5:36 PM
Subject: Re: [BlindHandyMan]
We have ventless gas logs in our house that we have been using during the
winter for heat. My family came down this weekend and told my wife and I
that there is black soot around the ceiling fans and around the edge of the
ceiling. What I am wanting to know is there any way to adjust the gas
Hello all you Bob Vila types...
I am redoing the Devil Dog brewery and I need to install a
dead-bolt lock on theDevil Dog house door.
I have purchased the lock and had someone read me the
instructions and it seems pretty strait foreword the only
thing is that I will need to buy the correct size
Hi,
This is probably not actually soot. There is quite a lot of water vapour as
a byproduct of burning gas and along with other interior moisture in the
environment you will get a little more condensation in some places like
corners where the ceiling meets the wall and other slightly cooler
There are probably many ways to locate the striker but on the few occasions
I have done it I just measure either from the ground up or the top down and
allow for the difference between the top or bottom of the door to the
corresponding member of the frame. At the top this is only usually a
Hi Everyone
Installing Doorknobs and Locks
Technology has affected almost every aspect of the daily life of modern man.
This being said, it would seem that some menial tasks have been overlooked,
like installing a doorknob. However, the hand of technology has simplified
even this job.
Keep in
26 matches
Mail list logo
