I've also been working on the SquirrelMail problems seen on the 5106R. Some
of our users reported not being able to attach files. It turned out to be
permissions in the /var/spool/squirrelmail directory and I fixed it with
this:
cd /var/spool/
chown -R admserv:admserv squirrelmail
This worked
I seem to remember there was a script to set or reset all the PHP settings
on the server to the same. However, I can't find any reference to it within
the maillist and can't see anything obvious when I browse the scripts on the
server.
Does anyone have a link to the info please?
Thanks and
There is a pretty neat article on CMU migrations at
http://www.blueonyx.it/index.php?page=cmu-migrations
I had to do exactly what you are planning recently and I followed the Export
DNS then the Import DNS sections to the letter and it worked just fine.
I had to log in to the GUI and click Appl
Hi Guys, many thanks for your answers...
Tobias, yes, this sounds like what I was looking for and I will definitely
have a go and getting this working. However as the server is a four hour
drive away I don't think I'll be messing with the network config remotely.
I was, somewhat naively, hopin
When I hit the oversized CD problem, I wrote the ISO to a USB memory stick
using a little Windows freebie called Rufus. Worked fine - it might just
save you a shopping trip and keep the fun rolling.
-Original Message-
From: blueonyx-boun...@mail.blueonyx.it
[mailto:blueonyx-boun...@mail.bl
We had to change our main IP address of the server recently when changing
rack in the data centre; this all went OK with the help of the mass DNS and
IP scripts.
However, the Web Server Aliases were no longer recognised after the change.
This applied to both hostnames and complete domains, even
Hi Tom, sounds like you've had a fun day.
If the disks you install and sync with are bigger that the original then I
believe they will only use the capacity of the original disk. So, faced with
a similar situation (and too tight to waste a bit of disk space) I asked the
question a few years back:
Hi, can someone remind me of the link to the instructions for upgrading
5108R to the rather post 8208R UI please.
I know Michael has written these in full, but despite searching I can't find
them. This would be greatly appreciated.
Many thanks, Richard
Hi, we use the APF and BFD package and the BX keeps blocking a Windows box.
I can remove the offending DROP rules, no problem and I thought I could add
a rule with this:
iptables -I INPUT -s nnn.nnn.nnn.nnn/27 -j ACCEPT
service iptables save
This is listed in the rules when I run iptables
I suspect this is hardware, but I'm sure someone has seen this before so a
spot of guidance would be appreciated.
I'm getting the following errors reported in /var/log/messages and to the
console:
Jan 4 20:57:57 s2 kernel: EDAC MC0: UE page 0x0, offset 0x0, grain
1073741824, row 0, labels
In Server Management -> Network Services -> DNS -> Advanced
With Rate Limit enabled, set the Responses Per Second to 1024 (as indicated
by maximum range). Save.
Restarting named from SSH now fails and viewing /var/log/messages contains:
Jan 20 06:48:32 localhost named[28568]: /etc/named
I've begun to use the Server Administrator feature but have previously
created some sites that should now be assigned to my newly created Server
Admin user.
Is there any means by which I can assign an existing site to their account?
Thanks, Richard
__
Cancel that thought... I've found it. It's hidden in plain sight under the
label 'Owner' :o)
From: Richard Morgan :: Morgan Web [mailto:rich...@morgan-web.co.uk]
Sent: 20 January 2015 14:40
To: 'blueo...@blueonyx.it'
Subject: Assigning sites to Server Ad
Quick question... I'm new to the BX web app installer and we're about to buy
it from the BX shop.
Does the Wordpress Installer set up the site with the database connected
and, in doing so, does it maintain the security/permissions so the site is
unlikely to get compromised? In other words, is
Thanks Michael, just a few simple set up questions now we've bought the
Wordpress installer (and I think the same questions will apply to other
webapps we need).
It all works well, but the database has an odd name and is not available in
the user's phpMyAdmin. Is there any way to choose the databa
Quite a serious error our virtual server. Build is build 20140909 for a
5207R in en_US.
Accessing the BX GUI gives: Fatal error: Call to undefined method
System::getConfig()
in /usr/sausalito/ui/chorizo/ci/application/libraries/CCE.php on line 124
The services are still working but Ive done a
@mail.blueonyx.it
Subject: [BlueOnyx:17002] Re: 5207R GUI: Fatal error: Call to undefined
method (WAS: "no subject")
On 2/7/2015 3:27 AM, Richard Morgan :: Morgan Web wrote:
> Quite a serious error our virtual server. Build is "build 20140909 for
> a 5207R in en_US".
>
eonyx-boun...@mail.blueonyx.it] On Behalf Of Richard Morgan ::
Morgan Web
Sent: 06 February 2015 13:46
To: 'BlueOnyx General Mailing List'
Subject: [BlueOnyx:16976] Re: Web app installer for BX
Thanks Michael, just a few simple set up questions now we've bought the
Wordpress installer (and I
Well this gave be a stronger than average heartbeat for a few minutes...
server: build 20140909 for a 5208R in en_US, fully YUM'd up.
I went to an existing site which has a MySQL DB in use created by the BX UI.
Web -> Services and made a change to the Web Server Alias. This included a
mistake
Thanks Michael, I've just confirmed it happens on a new install and an
upgraded 5208R.
It only happens if there is an error in edited Web Server Alias text, not an
error when adding new. To illustrate, if the alias was 'example.com' and it
is edited to 'exam' then click Save the problem manifests
> Hello,
> I’ve enabled suPHP and its been loading for over 2 hours. How long should
> this take?
If we're talking about the setting in the GUI then just moments; 15 seconds
max. Maybe there's an error elsewhere on the form so try pressing escape and
check everything again.
__
uired.
Thanks
Richard
-Original Message-
From: blueonyx-boun...@mail.blueonyx.it
[mailto:blueonyx-boun...@mail.blueonyx.it] On Behalf Of Richard Morgan ::
Morgan Web
Sent: 13 February 2015 16:07
To: 'BlueOnyx General Mailing List'
Subject: [BlueOnyx:17047] Re: Error in Services ->
You can add these to the .htaccess file in the site’s root. It’s easier,
site-specific and not at risk of being overwritten.
http://httpd.apache.org/docs/2.2/mod/mod_mime.html#addtype
From: blueonyx-boun...@mail.blueonyx.it
[mailto:blueonyx-boun...@mail.blueonyx.it] On Behalf Of Roy U
Hi
I've found a bug which appears to be consistent and prevents access to
phpMyAdmin.
When logged in as a server administrator (not admin), go to Personal Profile
>> Programs >> phpMyAdmin the following error is presented:
A PHP Error was encountered
Severity: Notice
Message: Undefined variable:
Hi, hopefully simple DNS/SPF question:
Is it possible to set anything in BX DNS settings or via the shell to append
a DNS record to all domains?
My thought is that I'd like to be able to add a TXT record for SPF, just
stating that the A and MX records can be used. It seems the same SPF
con
#x27;s DNS records.
Thanks.
From: blueonyx-boun...@mail.blueonyx.it
[mailto:blueonyx-boun...@mail.blueonyx.it] On Behalf Of Richard Morgan ::
Morgan Web
Sent: 07 May 2015 14:03
To: blueo...@blueonyx.it
Subject: [BlueOnyx:17529] Specifying SPF records just once for all
domains/DNS
Hi, hopefu
We have a virtual server which was recently restarted by our provider while
they upgraded their nodes. It's a 5208R (upgraded from 5108R, but probably
not related) and provides secondary DNS, secondary mail services and some
basic sites.
The first symptom was the BX GUI was not working. I've s
Hi Chris
Many thanks for the quick response.
>On 5/17/2015 5:00 AM, Richard Morgan :: Morgan Web wrote:
>> -bash-4.1# service named start
>>
>> Starting named:
>>
>> Error in named configuration:
>>
>> zone 0.0.127.in-addr.arpa/IN: loading from ma
Hi. We've got a virtual server on VMWare ESXi which crashes about every two
days.
It has 2Gb of memory, plenty of processor time, etc. All it does is run
about a dozen not-so-busy Wordpress sites. There is nothing obvious in the
logs for web activity and nothing particularly notable in either
Vilbel
Von: blueonyx-boun...@mail.blueonyx.it
[mailto:blueonyx-boun...@mail.blueonyx.it] Im Auftrag von Richard Morgan ::
Morgan Web
Gesendet: Montag, 24. August 2015 09:48
An: 'BlueOnyx General Mailing List'
Betreff: [BlueOnyx:18227] BX VM on VMWare repeatedly crashing
Hi. W
gards,
> Dirk
>
>
> blackpoint GmbH Friedberger Straße 106 61118 Bad Vilbel
>
>
>
>
> Von: blueonyx-boun...@mail.blueonyx.it
[mailto:blueonyx-boun...@mail.blueonyx.it] Im Auftrag von Richard Morgan ::
Morgan Web
> Gesendet: Montag, 24. August 2015 09:
Hi, I've experienced this before but ended up wiping the server. Now a
different server is exhibiting the same issue and a wipe/rebuild isn't a
simple option (also different hardware, BTW).
The admin user interface, admserv, is rendered inoperable with the following
error:
Fatal error: Call
Thanks Michael, appreciate your response.
The library and the file you mention are both present, don't look corrupt.
However 'yum reinstall base-alpine-ui" presents the error:
Error: Cannot retrieve repository metadata (repomd.xml) for repository:
BlueOnyx-520XR. Please verify its path and try ag
I've set the new defaults I want via the BX GUI at Server Management ->
Security -> PHP Settings.
I then run: /usr/Sausalito/sbin/php_settings_convert.pl
I expected (hoped) this would change the PHP settings for all of the vsites
to the same as those set in the defaults, but it doesn't chan
Started getting this error and POP3 logins are failing:
dovecot: pop3-login: Fatal: Couldn't parse private ssl_key:
error:0906D06C:PEM routines:PEM_read_bio:no start line: Expecting: ANY
PRIVATE KEY
I've looked at /etc/pki/dovecot directories and compared them with other
servers which all l
Probably not coincidence yesterday I had to go through a server and
re-enable suPHP for each of the sites. The initial symptom was the
previously mentioned PHP code being displayed in the browser.
The sites were owned by a reseller account and the permissions of the
reseller had all been removed.
> there is an side effect.
> If a lot of cced processes are running the customer also gets an error and
not the login page:
> A PHP Error was encountered
> Severity: Notice
> Message: Undefined index: isLicenseAccepted
> Filename: controllers/login.php
> Line Number: 353
> A PHP Error was encount
Thank you for this Michael.
Just one thing to report is that pigz is causing one of our servers to
almost grind to a halt.
This older, lowish spec (Dell R200, 4Gb) server mostly serves image files so
there is a lot of data which doesn't compress that well. This was previously
fine but yesterday a
We have a server with admserv failing.
I run 'service admserv status' and get 'httpd.admsrv dead but subsys locked'
I've checked the things I know: the port is not in use, manually removed the
lock file, restart CCE, checked the logs and a few things more.
When I look at /var/log/admser
Does anyone have any ideas where I can find the config for admserv which is
reporting as failed please?
I'm going to do a reboot, but I'm not confident that will fix it as it does
say 'Configuration Failed'.
Thanks
We have a server with admserv failing.
I run 'service admserv
Brilliant, thank you Michael. Your 'best way to fix it' was the best way to
fix it.
Always appreciated, Richard
-Original Message-
From: Blueonyx [mailto:blueonyx-boun...@mail.blueonyx.it] On Behalf Of
Michael Stauber
Sent: 12 July 2016 20:21
To: BlueOnyx General Mailing List
Subject: [Bl
Is there a fix for a 5108R which was upgraded from a 5106R via yum, as I'm
seeing a very similar error:
Protected multilib versions: openssl-1.0.1e-48.el6_8.1.i686 !=
openssl-1.0.1e-48.sl6_8.1.x86_64
I've searched list but can't see a specific fix. I've taken note the
response below is only for a
Oops, I mean it's a 5208R... apologies.
---
Is there a fix for a 5108R which was upgraded from a 5106R via yum, as I'm
seeing a very similar error:
Protected multilib versions: openssl-1.0.1e-48.el6_8.1.i686 !=
openssl-1.0.1e-48.sl6_8.1.x86_64
I've searched list but can't see a specific fix. I'v
We have to change the IP address of our server from the public IP to a
private IP behind a firewall.
I plan to use the console to run network_settings.sh unless someone suggests
a better way.
Having done this a while ago, I remember there is a bulk site IP change
script but I cannot find it
Thank you for the brave inclusion of the request for thoughts on 'any other
feature'.
It would be nice to see an extended DNS management section that allows for
wildcards, SRV records and the other features I currently have to add as a
.include file. I understand the DNS can be managed automatical
Hi, hope this issue can be resolved because it was brought to our attention
by the data centre via an abuse email.
The message below the line indicates Memcached on our server 87.246.nnn.nnn
was used to attack other servers via UDP port 11211. I've looked at how to
secure Memcached and for now
Thank you Michael for a detailed answer.
While I could stop and remove memcached, I'd appreciate you taking a look in
case something else has caused the issue. Login details from GUI to follow.
When I run the netstat command I get a different response which I think
implies it's listening on the p
Hi
This morning I've been greeted with httpd failing. When I try and start
httpd I get the following message:
# service httpd start
Starting httpd: Syntax error on line 998 of /etc/httpd/conf/httpd.conf:
Invalid command 'PerlConfigRequire', perhaps misspelled or defined by a
module not included i
Hi Colin
Same here but I've had a few hours to dig into this and have found a fix
(sent in my other message).
I don't know if it's a good fix, but it seems to get Apache running again.
Richard
-Original Message-
From: Blueonyx [mailto:blueonyx-boun...@mail.blueonyx.it] On Behalf Of Coli
pd running again be taken into consideration or more
downtime may occur.
-Original Message-
From: Blueonyx [mailto:blueonyx-boun...@mail.blueonyx.it] On Behalf Of
Richard Morgan :: Morgan Web
Sent: 02 March 2018 10:12
To: 'BlueOnyx General Mailing List'
Subject: [BlueOnyx:21789] R
Thank you Michael for another detailed explanation.
I tried disabling SSL and re-enabling it but it didn't seem to work; I
didn't touch the LE stuff as we're not using those certs.
I realised later that I could have relied on the line that includes the
*.conf files for mod_perl and mod_ssl, but m
I have created a completely new site, nothing has been uploaded and I try
and create a new Let's Encrypt Cert and get the following error:
- The following error occurred during the SSL certificate request:
The installation path for the certificates could not be determined.
I've che
Please ignore, it was a python-tools conflict that has been seen before.
Thanks.
Fixed with: rpm -e python27-tools-2.7.10-1.el6.x86_64
From: Richard Morgan :: Morgan Web [mailto:rich...@morgan-web.co.uk]
Sent: 13 March 2018 17:07
To: 'BlueOnyx General Mailing List'
Subject: Let
Hi, I'm getting a problem with my 5208R which is configured to only handle
secondary DNS and act as an outbound email relay.
Most email relayed is fine, but nearly all messages from a particular
site/client consistently fail. The log files are:
May 15 09:05:09 vps1 sendmail[32057]: w4F9567n032057
Hi
We use a monitoring service to check the server is accessible from outside
our network (NodePing). Sometimes their IPs are blocked in iptables but a
rule called 'dfixblock'. I've tried adding whitelist rules but the dfixblock
group gets re-inserted near the start.
Does dfix have an IP w
I spotted a small bug while editing a CNAME in the primary DNS section.
When adding a CNAME record I could enter www.firstexample.com ->
www.secondexample.com (four fields) and it'll create the BIND records
correct and all work OK.
When editing the CNAME it will display www.firstexample.com
56 matches
Mail list logo