bug#30548: 2014-11-01; smartparen-latex with delete-selection-mode
Alex Branham writes: > There are two smartparens bugs that may be related to this. > > https://github.com/Fuco1/smartparens/issues/827 > > TLDR; enable delete-selection-mode *before* enabling smartparens > > and also > > https://github.com/Fuco1/smartparens/issues/834 > > And the workaround here is to rely on smartparens rather than auctex's > implementation of $: > > (define-key TeX-mode-map (kbd "$") #'self-insert-command) (I'm going through old bug reports that unfortunately weren't resolved at the time.) No further comments, therefore I'm closing this report. Best, Arash ___ bug-auctex mailing list bug-auctex@gnu.org https://lists.gnu.org/mailman/listinfo/bug-auctex
bug#30548: 2014-11-01; smartparen-latex with delete-selection-mode
Hello, Unfortunately, by the time I noticed the bug, I have already had multiple updates so I am not sure which version was working. However, I am pretty sure I am using AUCTeX 12.1.0 right now. I am probably using TeXLive 2014 though. When I use `M-x package-list-packages` I have this line: auctex 12.1.0installed Integrated environment for *TeX* Regards, Abdul - Original Message - From: "Arash Esbati" To: "Abdul-Lateef Haji-Ali" Cc: 30...@debbugs.gnu.org Sent: Thursday, 22 February, 2018 20:07:13 Subject: Re: bug#30548: 2014-11-01; smartparen-latex with delete-selection-mode Abdul-Lateef Haji-Ali writes: > In my emacs setup, if I have smartparens-mode enabled with > smartparens-latex and I open a latex document, type some text then > select it and type any latex special command (such as $, ", \{, etc...) > the text gets surrounded by these symbols as expected. > > However, if I have delete-selection-mode enabled, then the text is > deleted instead. Other symbols like {, (, [ still work as expected even > when delete-selection-mode is enabled. > > The weird thing is that this used to work flawlessly before a recent > update that I cannot quite track. In fact a question was posted here > https://emacs.stackexchange.com/questions/21315/delete-selection-mode-and > > in 2016 and an update to AUCTeX was supposed to fix this issue. > [...] > Emacs : GNU Emacs 24.5.1 (x86_64-pc-linux-gnu, GTK+ Version 3.18.9) > of 2017-09-20 on lcy01-07, modified by Debian > Package: 2014-11-01 ^^ Hi, can you tell the version of your AUCTeX before your recent update? Currently, you are using an AUCTeX from 2014. Maybe you can update AUCTeX manually from ELPA with `M-x list-packages RET U x' to version 12.1.0 and try it again. Best, Arash ___ bug-auctex mailing list bug-auctex@gnu.org https://lists.gnu.org/mailman/listinfo/bug-auctex
bug#30548: 2014-11-01; smartparen-latex with delete-selection-mode
Sorry. I realize I wasn't clear in my last email. My original bug report was using the latest version of auctex (12.1.0). Hence, the bug seems to be in the latest version (as of this writing). Best, Abdul - Original Message - From: "Arash Esbati" To: "Abdul-Lateef Haji-Ali" Cc: "30548" <30...@debbugs.gnu.org> Sent: Friday, 23 February, 2018 16:26:19 Subject: Re: bug#30548: 2014-11-01; smartparen-latex with delete-selection-mode Abdul-Lateef Haji-Ali writes: > Unfortunately, by the time I noticed the bug, I have already had > multiple updates so I am not sure which version was working. > > However, I am pretty sure I am using AUCTeX 12.1.0 right now. I am > probably using TeXLive 2014 though. > > When I use `M-x package-list-packages` > I have this line: > auctex 12.1.0installed Integrated > environment for *TeX* It looks good. What is the situation reg. the bug? Do you still face the problem or can I close this report? Best, Arash ___ bug-auctex mailing list bug-auctex@gnu.org https://lists.gnu.org/mailman/listinfo/bug-auctex
bug#30548: 2014-11-01; smartparen-latex with delete-selection-mode
Abdul-Lateef Haji-Ali writes: > Unfortunately, by the time I noticed the bug, I have already had > multiple updates so I am not sure which version was working. > > However, I am pretty sure I am using AUCTeX 12.1.0 right now. I am > probably using TeXLive 2014 though. > > When I use `M-x package-list-packages` > I have this line: > auctex 12.1.0installed Integrated > environment for *TeX* It looks good. What is the situation reg. the bug? Do you still face the problem or can I close this report? Best, Arash ___ bug-auctex mailing list bug-auctex@gnu.org https://lists.gnu.org/mailman/listinfo/bug-auctex
bug#30548: 2014-11-01; smartparen-latex with delete-selection-mode
Abdul-Lateef Haji-Ali writes: > In my emacs setup, if I have smartparens-mode enabled with > smartparens-latex and I open a latex document, type some text then > select it and type any latex special command (such as $, ", \{, etc...) > the text gets surrounded by these symbols as expected. > > However, if I have delete-selection-mode enabled, then the text is > deleted instead. Other symbols like {, (, [ still work as expected even > when delete-selection-mode is enabled. > > The weird thing is that this used to work flawlessly before a recent > update that I cannot quite track. In fact a question was posted here > https://emacs.stackexchange.com/questions/21315/delete-selection-mode-and > > in 2016 and an update to AUCTeX was supposed to fix this issue. > [...] > Emacs : GNU Emacs 24.5.1 (x86_64-pc-linux-gnu, GTK+ Version 3.18.9) > of 2017-09-20 on lcy01-07, modified by Debian > Package: 2014-11-01 ^^ Hi, can you tell the version of your AUCTeX before your recent update? Currently, you are using an AUCTeX from 2014. Maybe you can update AUCTeX manually from ELPA with `M-x list-packages RET U x' to version 12.1.0 and try it again. Best, Arash ___ bug-auctex mailing list bug-auctex@gnu.org https://lists.gnu.org/mailman/listinfo/bug-auctex
bug#30548: 2014-11-01; smartparen-latex with delete-selection-mode
Remember to cover the basics, that is, what you expected to happen and what in fact did happen. Be sure to consult the FAQ section in the manual before submitting a bug report. In addition check if the bug is reproducable with an up-to-date version of AUCTeX. So please upgrade to the version available from http://www.gnu.org/software/auctex/ if your installation is older than the one available from the web site. If the bug is triggered by a specific (La)TeX file, you should try to produce a minimal sample file showing the problem and include it in your report. Your report will be posted for the auctex package at the GNU bug tracker. Visit http://debbugs.gnu.org/cgi/pkgreport.cgi?pkg=auctex to browse existing AUCTeX bugs. In my emacs setup, if I have smartparens-mode enabled with smartparens-latex and I open a latex document, type some text then select it and type any latex special command (such as $, ", \{, etc...) the text gets surrounded by these symbols as expected. However, if I have delete-selection-mode enabled, then the text is deleted instead. Other symbols like {, (, [ still work as expected even when delete-selection-mode is enabled. The weird thing is that this used to work flawlessly before a recent update that I cannot quite track. In fact a question was posted here https://emacs.stackexchange.com/questions/21315/delete-selection-mode-and in 2016 and an update to AUCTeX was supposed to fix this issue. Below is the minimum init.el code that produces this problem (require 'package) (add-to-list 'package-archives '("melpa" . "https://melpa.org/packages/";) t) (defun require-package (package) "Install PACKAGE unless already installed." (unless (package-installed-p package) (package-install package)) ) (package-initialize) (package-refresh-contents) (require-package 'auctex) (require-package 'smartparens) (require 'smartparens) (require 'smartparens-latex) (delete-selection-mode t) (defun latex-mode-defaults () (smartparens-mode) ) (add-hook 'LaTeX-mode-hook 'latex-mode-defaults) Emacs : GNU Emacs 24.5.1 (x86_64-pc-linux-gnu, GTK+ Version 3.18.9) of 2017-09-20 on lcy01-07, modified by Debian Package: 2014-11-01 current state: == (setq AUCTeX-date "2014-11-01" window-system 'x LaTeX-version "2e" TeX-style-path '("/var/lib/auctex/emacs24/" "/usr/share/emacs/site-lisp/auctex/style" "/home/hajiali/.emacs.d/auctex/auto" "/home/hajiali/.emacs.d/auctex/style" "auto" "style") TeX-auto-save nil TeX-parse-self nil TeX-master t TeX-command-list '(("TeX" "%(PDF)%(tex) %(file-line-error) %(extraopts) %`%S%(PDFout)%(mode)%' %t" TeX-run-TeX nil (plain-tex-mode ams-tex-mode texinfo-mode) :help "Run plain TeX") ("LaTeX" "%`%l%(mode)%' %t" TeX-run-TeX nil (latex-mode doctex-mode) :help "Run LaTeX") ("Makeinfo" "makeinfo %(extraopts) %t" TeX-run-compile nil (texinfo-mode) :help "Run Makeinfo with Info output") ("Makeinfo HTML" "makeinfo %(extraopts) --html %t" TeX-run-compile nil (texinfo-mode) :help "Run Makeinfo with HTML output") ("AmSTeX" "amstex %(PDFout) %(extraopts) %`%S%(mode)%' %t" TeX-run-TeX nil (ams-tex-mode) :help "Run AMSTeX") ("ConTeXt" "%(cntxcom) --once --texutil %(extraopts) %(execopts)%t" TeX-run-TeX nil (context-mode) :help "Run ConTeXt once") ("ConTeXt Full" "%(cntxcom) %(extraopts) %(execopts)%t" TeX-run-TeX nil (context-mode) :help "Run ConTeXt until completion") ("BibTeX" "bibtex %s" TeX-run-BibTeX nil t :help "Run BibTeX") ("Biber" "biber %s" TeX-run-Biber nil t :help "Run Biber") ("View" "%V" TeX-run-discard-or-function t t :help "Run Viewer") ("Print" "%p" TeX-run-command t t :help "Print the file") ("Queue" "%q" TeX-run-background nil t :help "View the printer queue" :visible TeX-queue-command) ("File" "%(o?)dvips %d -o %f " TeX-run-dvips t t :help "Generate PostScript file") ("Dvips" "%(o?)dvips %d -o %f " TeX-run-dvips nil t :help "Convert DVI file to PostScript") ("Dvipdfmx" "dvipdfmx %d" TeX-run-dvipdfmx nil t :help "Convert DVI file to PDF with dvipdfmx") ("Ps2pdf" "ps2pdf %f" TeX-run-ps2pdf nil t :help "Convert PostScript file to PDF") ("Glossaries" "makeglossarie