Re: [RPI3] Latest minirootfs

2017-08-02 Thread R0me0 ***
Yeap, fixed 2017-08-02 9:03 GMT-03:00 Jonathan Gray : > On Tue, Aug 01, 2017 at 06:40:26AM -0300, R0me0 *** wrote: > > Hello, Jonathan! > > > > Copying the provided u-boot.bin worked :) > > > > Yes, the issue just affects USB DRIVE. > > > > Never touched config.txt. > > > > The

Re: [RPI3] Latest minirootfs

2017-08-02 Thread Jonathan Gray
On Tue, Aug 01, 2017 at 06:40:26AM -0300, R0me0 *** wrote: > Hello, Jonathan! > > Copying the provided u-boot.bin worked :) > > Yes, the issue just affects USB DRIVE. > > Never touched config.txt. > > The procedures were: dd if=minirootfs61.fs of=(USB drive or sd-card ) > bs=1M > > If I use

Re: [RPI3] Latest minirootfs

2017-08-01 Thread R0me0 ***
Hello, Jonathan! Copying the provided u-boot.bin worked :) Yes, the issue just affects USB DRIVE. Never touched config.txt. The procedures were: dd if=minirootfs61.fs of=(USB drive or sd-card ) bs=1M If I use sd-card, then I make sure that USB drive is not bootable and is empty and use both.

Re: [RPI3] Latest minirootfs

2017-07-31 Thread Jonathan Gray
On Mon, Jul 31, 2017 at 11:15:52PM +, R0me0 *** wrote: > I wrote minirootfs as usual directly to usb flash drive > > minirootfs61.fs31-Jul-2017 03:11 22020096 > > > > U-Boot> boot > Card did not respond to voltage select! > mmc_init: -95, time 24 > > USB device 0: >Device 0:

Re: [RPI3] Latest minirootfs

2017-07-31 Thread R0me0 ***
writing minirootfs to SD card boot and installs as usual but not boot from usb flash drive and returns the same errors as previously e-mail ( enter in loop ) 2017-07-31 20:15 GMT-03:00 R0me0 *** : > I wrote minirootfs as usual directly to usb flash drive > >

[RPI3] Latest minirootfs

2017-07-31 Thread R0me0 ***
I wrote minirootfs as usual directly to usb flash drive minirootfs61.fs31-Jul-2017 03:11 22020096 U-Boot> boot Card did not respond to voltage select! mmc_init: -95, time 24 USB device 0: Device 0: Vendor: Kingston Rev: 1.00 Prod: DataTraveler 2.0 Type: Removable Hard Disk