Hello
I am very new for Matlab, Xilinx, and Casper. I just tried to
simulate tut3.mdl which I downloaded from Casper website. Then I recived
error message that;
failed to find 'sync_delay_en' referenced by =
'tut3/fft_wideband_real1/fft_biplex_real_4x0/bi_realunscr_4x/reorder_evevn=
/sync_delay_
For the moment, I scavenged another SD card from a working ROACH, which
seems to have fixed the issue. I'd say that that FS corruption is a
pretty good bet. I'll try this out tomorrow, when I get the chance.
Thank you!
--Ryan
On 09/10/2012 05:53 PM, Laura Vertatschitsch wrote:
Our sys admi
Hi Matt,
Looking at your model, you have write enable pulses coinciding with every
second address location. Even though a write enable pulse writes two 36 bit
values, each address location addresses a full 72 bit data burst, so if you
want to write the entire qdr you need to increment the address
Our sys admin was able to get our system back up to working condition with
the following script:
#!/bin/sh
sync
echo
echo "THIS WILL REMOUNT, FSCK, AND REBOOT YOUR COMPUTER, YOU HAVE 5s TO
CTRL+C"
echo
sleep 6
sync;sync
mount -n -o remount,ro / || exit 1
fsck /dev/mmcblock1
echo
echo "REBOOTING IN
I had some luck solving this problem by putting the SD card in another
machine and using fsck.ext2 on it to fix the corrupt FS. My experience
is the SD cards are overly susceptible to this sort of FS corruption.
I've had much better luck netbooting (once getting through the
annoying initial hurdle
Hello Ryan,
This happened to me as well recently with a new ROACH board. I
noticed that the file '/etc/network/run/ifstate' was corrupted. When I
used the command 'ls -alh' all I got was question marks in each field. I
was unable to rm or mv the file, or even execute 'touch ifstate'.
Hi All,
We recently purchased two ROACH boards from Digicom and we seem to be
experiencing a bit of an issue. Upon trying to boot to the SD card on
either, several processes don't come up, complaining of "Stale NFS
handle". If I configure eth0, I can start it that once but it will not
initi
On 9/5/12, katherine viviana cortes urbina wrote:
> Hi ,
>
> I did the ROACH NFS guide, but when I like booting from NFS and I do run
> netboot , I saw BOOTP bradcast 1 , etc . Retry count exceeded; starting
> again. How Can I resolved?
To work out if you are not getting DHCP requests, or if it
8 matches
Mail list logo
