Hello,
a usually working roach1 ceased to answer on its ethernet.
We tried to power OFF/ON with no result
We re-connect the serial line and got the following through
minicom at power on:
-------
U-Boot 2008.10-svn2226 (Nov 13 2009 - 09:27:45)
CPU: AMCC PowerPC 440EPx Rev. A at 500 MHz (PLB=166, OPB=83, EBC=83 MHz)
No Security/Kasumi support
Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
32 kB I-Cache 32 kB D-Cache
Board: Roach
I2C: ready
DTT: 1 is 22 C
DRAM: (spd v1.2) dram: notice: ecc ignored
1 GB
FLASH: 64 MB
USB: Host(int phy) Device(ext phy)
Net: ppc_4xx_eth0
Roach Information
Serial Number: 030143
Monitor Revision: 8.3.1698
CPLD Revision: 8.0.1588
type run netboot to boot via dhcp+tftp+nfs
type run soloboot to run from flash without network
type run usbboot to boot using filesystem on usb
type run bit to run tests
Hit any key to stop autoboot: 0
=>
The Hit any key... appears directly with a zero count, leaving no chance
to hit.
The roach did not boot as usually on SD card, nor on its backup clone.
Any idea?
Jean Borsenberger
