Hi David,
Sounds very interesting. Thanks for the info. No one is using a soft core
cpu as there is already the PPC on the ROACH boards. The DDR and QDR have
interfaces to the PPC over the epb/opb bus. This runs at 66MHz and is not
idea to use as part of your data pipeline as it is generally to
The mlib_devel library with the ddr3 support is available from
github.com/juan-pierre/mlib_devel - fetch the ddr3_devel branch (not merged
to master). I have successfully tested designs with the DDR3 clock rate set
to 200 MHz (400 MHz DDR) and 250 MHz (500 MHz DDR) - just a word of
caution, the
Hi all
I have been working on a yellow block for the DDR3 of the ROACH-2. As far
as I know this yellow block does not yet exist?
The same DRAM yellow block is used and interfacing the memory remains the
same (as for the ROACH-1). The DRAM also uses an asynchronous fifo to allow
long write
This is great work JP.
Out of interest is anyone else planning to use the DDR3 on ROACH2?
Wesley New
South African SKA Project
+2721 506 7365
www.ska.ac.za
On Wed, Jul 24, 2013 at 8:24 AM, Juan-Pierre Jansen van Rensburg
jvrensburg...@gmail.com wrote:
Hi all
I have been working on a
Hi JP and Wes,
I am very interested in this work, but from a RHINO perspective. I am
looking into how I should go about adding the RHINOs DRAM into my
Architecture.
I have a few questions, if you have time to answer.
Did you use the Memory Interface Generator? And did it work for you?
Are there
Comments below.
On Wed, Jul 24, 2013 at 12:07 PM, Matthew Bridges
matthewbridge...@gmail.com wrote:
Hi JP and Wes,
I am very interested in this work, but from a RHINO perspective. I am
looking into how I should go about adding the RHINOs DRAM into my
Architecture.
I have a few
Hi JP, Wes,
We need the DDR3 rather urgently (time scale of 1 to 2 months), and Rurik
Primiani has recently been working on it. Laura Vertatschitsch will be joining
our group in September and we had her in mind to help with this too though
recently concluded her start date isn't soon enough.
Hi JP,
We recently (last week) discovered we desperately need the DDR3 on ROACH2
since our work-around for getting the visibility data out of our system
won't work in the long run (due to 10 GbE switch limiations... it's a long
story). So just this week I re-started work on a DDR3 yellow block I
8 matches
Mail list logo