Hi Dan,
Thanks for the response! I will definitely give this paper a read through
as we design our setup.
Sean
On Wednesday, December 26, 2018 at 8:31:28 PM UTC-7, danseti wrote:
>
>
> hi sean,
>
> there's a paper by danny price et al, at:
> https://arxiv.org/abs/1804.04571
> that describes how danny, jack and matt put a bunch of snaps into a
> schroff 7U box.
> below is a page from their paper that shows the back and front of the
> enclosure.
>
> best wishes,
>
> dan
>
> [image: image.png]
>
> On Fri, Dec 21, 2018 at 1:43 PM Sean Crawford > wrote:
>
>> Hi all,
>>
>> We are just getting started with several SNAP boards and I have been
>> tasked with designing the layout of the SNAP's, HPC's, power supplies, and
>> other hardware inside an RFI cabinet. While the Casper website has several
>> files for a chassis designed for individual boards, we would prefer for the
>> SNAP's to be card inserted inside the cabinet to allow easy access. If
>> anyone has any suggestions about hardware (such as power supplies, card
>> guides, etc.) that they have used and like, I would greatly appreciate them
>> as I evaluate different options and sketch this up.
>>
>> Thanks for the help!
>> Sean
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "cas...@lists.berkeley.edu " group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to casper+un...@lists.berkeley.edu .
>> To post to this group, send email to cas...@lists.berkeley.edu
>> .
>>
>
--
You received this message because you are subscribed to the Google Groups
"casper@lists.berkeley.edu" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to casper+unsubscr...@lists.berkeley.edu.
To post to this group, send email to casper@lists.berkeley.edu.
