Does anyone know of any preferably software that will allow you to mange the
Cisco 79xx series of phones remotely. We have a large amount of phones that
are staticly assinged and are moving to a new CM server with a different IP.
The CM and TFTP entries specifcly need to be change to reflect the
Hi Shrini,
created the mentioned ephone-dn ..did not help.
Phones are registered to SRST and able to make a call.
when there is active call on shared line , other user press the shared line
, Bbarge soft key does not appear and dial tones appears to make a new call
that indicates that privacy
Check Phone Remote by www.voipintegration.com
Regards,
Shamid
Sent from my BlackBerry® smartphone using my Telenor Persona connection
-Original Message-
From: haroon javed harooon.ja...@gmail.com
Sender: ccie_voice-boun...@onlinestudylist.com
Date: Tue, 18 Jan 2011 12:44:49
To:
Hi All,
thank for reply.
here is the answer
allow watch is configured under ephone-dn
set the CUP Publish trunk to respective trunk but did not help. i guess this
is only for CUPS
subscribe CSS is set to access the phone dn.
Regards,
Mritunjay
2011/1/18 Roger Källberg roger.kallb...@cygate.se
Hi Mritunjay,
Try adding privacy off under ephone template ..
ephone-template 1
privacy off
softkeys remote-in-use CBarge Newcall
under telephony-serv
srst ephone template 1
If still no success send me your router config, I will test and sure will
provide a solution
Thanks
Shrini
Hi,
I suggest to follow Randall's suggestion, as this has already been discussed
many times...
regards
kobel
On Mon, Jan 17, 2011 at 11:35, Mritunjay Kumar mjs...@gmail.com wrote:
Hi All,
thanks for reply and sorry for delayed response.
set the max-ephone to 2 and phone type is set but
Please check the archives, I think this has been discussed last week:
http://www.mail-archive.com/ccie_voice@onlinestudylist.com/msg20582.html
regards
kobel
On Tue, Jan 18, 2011 at 06:16, Mritunjay Kumar mjs...@gmail.com wrote:
Hi All,
CME phone is able to watch the status of CUCM phone but
Hi Roger ,
both cucm and cme phone are sccp phones.
Regards,
Mritunjay
2011/1/18 Roger Källberg roger.kallb...@cygate.se
The problem that was stated out in the to the previous tread linked to by
kobel is for SCCP phones on CME. According to that you will only be able to
get precense on SIP
Hi Shrini,
http://onlinestudylist.com/archives/ccie_voice/2010-November/071295.html
privacy off under ephone-template does not work as this is a bug.
it is tested and discussed at
http://onlinestudylist.com/archives/ccie_voice/2010-November/071295.html
but i tried with ephone template but
Hi,
I've below setup, BR2 as a mgcp gw with fall-back configured.
dial-peer voice 9001 pots
description *** SRST TO US ***
destination-pattern 9001[2-9]..[2-9]..
port 0/0/0:23
prefix 001
!
num-exp 5... 90012123945...
num-exp 1... 90016178631...
!
When in fallback mode,BR2 users dialed
Hello,
I've an idea for workaround. I've seen somewhere in the documentation, that
it's possible to use alias command to enable phone-specific forwarding.
e.g.
* configure max-dn with preference 2 (default preference used for SRST
dial-peers)
* configure alias for the phone itself with higher
Singlewire has a Remote Phone Control software that is good for large sites.
You might also check out VoIP Integrations. They have a great app for
controlling phones. Probably much cheaper than the Singlewire one. The same
company has a handy tool for pushing out new background images to
Hello,
What does this have to do with the CCIE Lab preparation? I bet you'll get a
lot of answers if you google it.
Regards,
Roger Carpio.
On Tue, Jan 18, 2011 at 1:44 AM, haroon javed harooon.ja...@gmail.comwrote:
Does anyone know of any preferably software that will allow you to mange
the
Phoneview from unifiedfx allows you to remotely manage a large amount of
devices by running a single instance of software.
--
Vik Malhi CCIE #13890
Managing Partner / Instructor - IPexpert, Inc.
Mailto: vma...@ipexpert.com
Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130
Live
I would first test a ad hoc conference call. Does this work? sh sccp
connections to confirm the hw cfb is being used.
--
Vik Malhi CCIE #13890
Managing Partner / Instructor - IPexpert, Inc.
Mailto: vma...@ipexpert.com
Telephone: +1.810.326.1444 ext 420
Fax: +1.810.454.0130
Live Assistance,
If you do the called # transformation prior to the POTS dial-peer then the
caller phone display is affected.
If you prefix in the pots dial-peer then the caller display is not
affected.
--
Vik Malhi CCIE #13890
Managing Partner / Instructor - IPexpert, Inc.
Mailto: vma...@ipexpert.com
Hi Mritunjay,
Just to clarify what I meant from my notes. In your scenario below, the
SCCP phone on CME should be able to monitor the CUCM SCCP, however the CUCM
SCCP phone will not be able to monitor the presence of the CME SCCP phone.
If you have a CUCM SIP Phone, then in 7.0.1 you
Hi Shingei,
I misread your question. Please disregard for this scenario.
Jeff
From: givemeccievoice2...@gmail.com [mailto:givemeccievoice2...@gmail.com]
Sent: Tuesday, January 18, 2011 8:30 AM
To: 'ccie_voice@onlinestudylist.com'
Subject: RE: [OSL | CCIE_Voice] Called # manupulation
I have a question on xforms
Based on some examples
globalizsed
1. Incoming call from local number 5551234
2. Terminates on GW. \+1212 becomes +12125551234- +1212 is added
Number at CUCM +12125551234 - is this where the localised configuration is
based upon ?
Localised at device (a)
Hi,
i think that if you are using an H323 gateway you can do it with
translation-profile under dial-peer to modify the ANI.If you have an mgcp
gateway i suppose there is no way to modify the ANI differentiating it based on
the type of the call whithout using RP/RL.
Matteo
From:
Hi Matteo,
I finally got it:
You need a separate CSS to translate the Calling party depending on the called
:-):
e.g. I have a CSS SITEA-NORMALIZE with 3 TP:
9[2-9]XXset calling party Prefix 303
9[2-9]XX[2-9]XXset calling party Prefix 212303
9011![0-9#]
Can someone confirm where called and where calling xforms are used
My understanding is that
Calling is inbound to the device to change the incoming number from e164 to
national,local etc
Called is for changing a e164 from \+ to a local number
But watching one of the video's I think I
Hi Mrintunjay,
Here is the working config. Took an hour to figure it out :-)
There is a bug associated with CME 12.4T /CSCti11843/
telephony-service
sdspfarm units 2
sdspfarm tag 1 BR1-CNF
no privacy
conference hardware
srst mode auto-provision none
srst ephone template 1
srst dn
If you configure Single Button cBarge in CUCM then it won't work in SRST.
On Jan 18, 2011, at 11:29 AM, Amit Batra wrote:
Hello guys
May be I am wrong. But I kind of remember this issue. People talked a
lot about it. And is a known bug. If this is the same issue which we are
Hi Shrini,
Thanks for your time on this issue.
but i am still wondering , how my config is different than yours.
I disabled privacy under telephony service as well as under both ephones
but still did not work for me.
Please clarify further.
appreciate your help !
Regards,
Mritunjay
On Wed, Jan
Dear all
in vol1 network infrastrure,
why we need to configure trunk mode on esw,why not access mode .i have test
the access mode is ok.
SITEB(config)#int range f0/1/0 -3
SITEB(config-if-range)# switchport trunk native vlan 602
SITEB(config-if-range)# switchport mode trunk
26 matches
Mail list logo