Hi Wayne,
I used ipexpert Racks during my preparation, does that mean I am a member. If
the answer is yes, then how to join ?
Thanks
Sent from my iPhone
On May 28, 2014, at 11:42 PM, Wayne Lawson waynelawson-...@ipexpert.com wrote:
Yes - you will be a member.
Regards,
Wayne A.
This feature can be found in cucm 9.x,
I am not sure if it is there in CME 9
Sent from my iPhone
On May 9, 2014, at 4:22 PM, Minh Dang dangquangm...@vnpro.org wrote:
Group,
We have a corporate directory that include extensions. Just wonder if i could
insert pause when dialing out with
:
Hi
If you have CUE you can achieve this task in the same way as into UCCX
#Chrysostomos
*From:* ccie_voice-boun...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *CCIEing
*Sent:* Sunday, April 6, 2014 9:28 AM
*To:* ccie_voice@onlinestudylist.com
Dear Group Members,
I would to ask about this feature ..After a time check (if the time after
mid night) I have a UCCE system and I need to create a script that allow
the call to be transferred to an IP Phone (Not Agent) just a number or PSTN
number , the most important is This is not agent.
As
Why the guys keep getting not 100% in voicemail integration, what common
mistakes happened
Sent from my iPhone
On Oct 25, 2013, at 12:42 AM, William Bell b...@ucguerrilla.com wrote:
In this instance, best practice is a relative concept. Many applications
leverage AXL to retrieve
But the question is that..
Does the search supported in the website in real lab?
On Thu, Oct 24, 2013 at 3:03 PM, Todd Carswell tcar0...@gmail.com wrote:
I noticed the same thing. From the main documentation page, just type
Communications Manager Express in the Find section and it'll come
Can you past your config here to see what you did?
Sent from my iPhone
On Sep 28, 2013, at 11:40 AM, Bashar Aziz bashar1a...@gmail.com wrote:
Why I am getting 0% in Voice Gateway and Signalling for the 6th time, 100%
tested and worked, what is the trick ?
Regards,
On Fri, Sep
Did you try to disable csa?
On Thu, May 23, 2013 at 8:21 PM, Karen Johnson karen.johnson...@yahoo.cawrote:
hi all,
I used auto phone register in proctorlabs. When UCM group start with SUB,
phone never registered.
But when I move PUB to 1st Server in Group, phone registered fine.
And I
I do not set to the exam yet.. but here are below the steps I use to
configure my CUPS:
CUPC Configuration (Softphone)
Form CUPS Side :
- Application -- Settings
- Application -- CUCP -- add Voice Mail Server
- Application -- CUCP -- add Mail Store (default 143)
- Application --
HI All,
I am really struggling with QOS
I can understand what this command means :
mls qos srr-queue output cos-map queue 1 threshold 3 5
How to use it ???
___
For more information regarding industry leading CCIE Lab training, please visit
It is working just now
Sent from my iPhone
On May 14, 2013, at 12:50 PM, Josh Petro josh.pe...@gmail.com wrote:
Hi Randall,
I also can get to their site and I'm able to login. I don't have any rack
time now, so I obviously cannot check that far, but I was able to get to
their site. The
Hi all,
I had the following problem , when I make a call from remote Destination to
the MVA IVR number, then to internal extension, the calling name for the
configured in the line for the remote destination profile does not appear
on the internal phone when it answered the call, this happen only
So how to increase the buffer :)
Sent from my iPhone
On May 15, 2013, at 1:47 AM, Barrera, Hugo hugo.barr...@nexusis.com wrote:
This dang client cost me about 20 min in the Lab because I didn't know how to
increase the buffer.
Regards,
Hugo
On May 14, 2013, at 3:32 PM, Bill
You need transcoder on the hq side
Sent from my iPhone
On May 2, 2013, at 5:32 AM, Hesham Abdelkereem heshamcentr...@gmail.com wrote:
Dear Experts,
I'd like to ask when I configure the Regions between HQ , SB and SC
Usually for Interregion relationship is G729 Codec is used while for
Hi all,
when IP Phones goes to SRST mode.. (normal call-manager-fallback)
how I can see that phone, how to control it, I need to make calls from that
phone..
While the phone is register with call manager I can control it via
phoneview.. but when it went to SRST mode , how to control the phone
Step 1: i think call manager will generate all type of codec when you upload
the file, so you can upload the g711 version copy.
Step 4: you need to select both codec as the g711 will be used in case the call
happened between 2 end points in same region
Sent from my iPhone
On May 9, 2013,
Did you configure the vicemail profile??
How about your voicemail services , double check if it is exists under
Device-- device settings -- phone services
If it is not found you have to create it
Sent from my iPhone
On May 8, 2013, at 2:37 PM, Vikky Kumar vikkyne...@gmail.com wrote:
Hi
Hi All,
does any one has any idea about the phone view used by ip experts..
I was working normal, when it stop respond to my transactions.. I am able
to see the phones from call manager.. but a I am no longer able to make any
transaction on the phone, it always give me failure!!!
any idea.
Hi all,
Some times when I debug isdn q931 , I am not able to see the calling number
on the debug.. only the called number appear..
any idea ???
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are
For mgcp, from rote pattern configuration , you have to allow sending the
calling name.
For h323 under interface serial configuration ( for the used pri)
You have to use the commands
Isdn outgoing ie display
Isdn outgoing ie redirecting-number
Sent from my iPhone
On May 7, 2013, at 1:44 PM,
Dears,
So the above access list is correct ?? CUE signaling traffic only used this
port ? 2748
Is there any document showed the used port for the CUE traffic ??
On Thu, Apr 18, 2013 at 12:46 AM, Jack Kamina kamina.j...@yahoo.com wrote:
on one of the practice lab the need is to police the
Hi all,
Is there any document tell how to translate the DSCP values for
hexadecimal to number
i.e DSCP EF == 46
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking
:
https://www.ipexpert.com/Cisco/CCIE/Voice/Free-Resources
Check the High Availability section. You can find the different types of
HA, and their differences, as well.
HTH
On Mon, Apr 22, 2013 at 2:19 AM, CCIEing aboaz...@gmail.com wrote:
Dear All,
In case the HA requirements was to use
Dear All,
In case the HA requirements was to use SRST, then which command to use
Srst mode auto-provision all
or
Srst mode auto-provision none ?
and what is the difference between them ,
Thanks
___
For more information regarding industry leading
Of *CCIEing
*Sent:* 18 April 2013 03:17
*To:* ccie_voice@onlinestudylist.com
*Subject:* [OSL | CCIE_Voice] Full Lab, More than one question
** **
Hi All,
** **
Today I tried to make a full lab , it was my 1st try to do all tasks in 8
hours session!
** **
the following
Hi all,
For the seek of solving the MVA task for siteB, a DID number needed.
How to know the range of DID's for the T1 PRI used with Site B?
Appreciate your input
___
For more information regarding industry leading CCIE Lab training, please visit
Hi all,
Very strange thing happen 2 times during my practice to lab,
the calls to hq failed until i reload the router
before reload, ISDN status was ok
mgcp gateways was registered and everything seems to be fine, the call
arrive the gateway but the phone does not ring, then call dropped ..
Yes
On Fri, Apr 19, 2013 at 2:57 AM, Bill Lake whl...@gmail.com wrote:
Was this an MGCP gateway?
Sent from my iPhone
On Apr 18, 2013, at 6:24 PM, CCIEing aboaz...@gmail.com wrote:
Hi all,
Very strange thing happen 2 times during my practice to lab,
the calls to hq failed until i
would do the following on the phone:
1. Settings key
2. **# to unlock
3. Press more softkey when it pops up
4. Press Erase softkey
-Bill
--
William Bell, CCIE #38914
blog: http://ucguerrilla.com
twitter: @ucguerrilla
On Apr 15, 2013, at 8:16 PM, CCIEing wrote:
Dear all
Hi All,
Today I tried to make a full lab , it was my 1st try to do all tasks in 8
hours session!
the following questions appeared :
1-Do i need to enable the auto registration on both CUCM servers, including
the starting/End DN information ?
2- When you use the auto registration method to
Dear All,
In the devise base strategy which is better to start with the CUCM and the
applications or to start with the Router devices ??
I believe to start with CUCM is better that allow the phones to register
earlier, as all your testing then will depend on it.
Appreciate your feedback and
Dear all,
I am using proctorlabs racks, My siteB phone are not talking IP addresses
from CUCM-PUB DHCP.
I have configured the switch port connected to the IP phone with the
correct access/voice vlan informaation. I also apply the IP hdcp
helper-address command on the voice-vlan interface on the
Dears,,
When I reserve a back to back racks sessions , does the pod number changed?
does my configuration removed one I go from one time session to the next
one
Appreciated
___
For more information regarding industry leading CCIE Lab training, please
Hi all,
I have 2 phones connected to my SiteC switch, both of them configured to be
in Site device pool. when I drop the WAN connection between SiteC and HQ,
only my 7960 phone goes in SRST . but my 7941 phone does not .. when i try
to check the phone url , it does not show that information of
Dear All,
I have an issue with CUC -- call routing -- forward routing rules,
when add new rule with condition Forwarding Station = 0998
where 0998 is DN on CTRP that has the CFW_ALL to voice mail
it does not work at ALL
any help?
___
For more
Hi all,
I configured a DCHP pool , ip phones failed to get IP's
when debug the IP hdcp server event and packets I got the following error
*DHCPD: Allocate an address without class information (177.3.11.0)*
*DHCPD: subnet [177.3.11.1,177.3.11.254] in address pool sitec is empty.*
*DHCPD: Sending
OH what a mistake !!!
I updated my config to the correct one
*ip dhcp excluded-address 177.3.11.1 177.3.11.25*
*ip dhcp excluded-address 177.3.11.28 177.3.11.254*
*
*
*
*
*:)*
On Sat, Mar 30, 2013 at 2:22 PM, CCIEing aboaz...@gmail.com wrote:
Hi all,
I configured a DCHP pool , ip
Hi again for all,
I have question regarding the exam, in the CUCM call routing section :
If the question does not clearly mention that the Called Party Type and
plan is required in some parts of the call routing points..
Is it better to configure the them (call type and plan) or to leave them
...
-Justin
On Mar 30, 2013 2:04 PM, CCIEing aboaz...@gmail.com wrote:
Hi again for all,
I have question regarding the exam, in the CUCM call routing section :
If the question does not clearly mention that the Called Party Type and
plan is required in some parts of the call routing points
Hi Jamie,
Would you please explain this more :
***You have to setup most devices with little or no prior configuration,
there are things that cannot change. Know these things and practice them
over and over so you do not have to think about them*
Thanks in advance
On Wed, Mar 27, 2013 at
Hello Friends...
I have the following setup, I am not sure if the will be suitable to enable
the MVA feature !
I have CUCM cluster, but his CUCM cluster has no voice GW or DID .. but
this CUCM cluster has Inter-cluster trunk to another CUCM cluster which has
the DID numbers ?
Can I configure
Hi,
Changing the selection to top down solve the issue :)
thanks
On Sat, Mar 23, 2013 at 2:27 AM, ikizoo4 kwon ikiz...@hotmail.com wrote:
use Topdwon for channel selection order in GW
--
Date: Sat, 23 Mar 2013 00:52:10 +0300
From: aboaz...@gmail.com
To:
, at 4:52 PM, CCIEing aboaz...@gmail.com wrote:
Hi all,
After configuring my HQ GW as MGCP, then configure my T1 to register with
cucm , I was govern by the lack of the DSP resources, which force me to
define only 16 channel out of the 23 on my pri-group under the T1
controller configuration
set on PSTN router with
only 4 slots and configure my GW with 8.
Edgar
On Fri, Mar 22, 2013 at 5:52 PM, CCIEing aboaz...@gmail.com wrote:
Hi all,
After configuring my HQ GW as MGCP, then configure my T1 to register with
cucm , I was govern by the lack of the DSP resources, which force me
Hi geeks :)
What is the difference between using Network side clocking and User Side
clocking.
Regarding the exam, do they ask us to use any one of the both
in particular ?
I saw practice question informing that the PRI circuit layer 2 should be
user side
where as it will be a network side
Hi experts,
I am trying to configure Branch2-R3 as MGCP VG, and I configured an
interface E1.
I have problem when try to bind-l3 in the serial interface s0/0/0:15 with
ccm-manager , the only option appear is q931???
the gateway won't to register with ccm..
any idea ???
Appreciate your
Dears,
The problem was with this command :
controller e1 0/0/0
pri-group timeslots 1-12
where it should be
controller e1 0/0/0
pri-group timeslots 1-12 service mgcp
Thanks
On Fri, Mar 22, 2013 at 9:57 PM, CCIEing aboaz...@gmail.com wrote:
Hi experts,
I am trying to configure Branch2-R3
Hi all,
After configuring my HQ GW as MGCP, then configure my T1 to register with
cucm , I was govern by the lack of the DSP resources, which force me to
define only 16 channel out of the 23 on my pri-group under the T1
controller configuration !!
here is the config :
controller T1 0/0/0
Hello Experts,,
Does any one of you encountered the following problem :
I have MGCP gateway registered with CUCM 8.6, the GW have a FXO card
installed and analog line connected to that FXO.. when I try to call any
PSTN number the calling ID for my analog line that is connected to the FXO
does
Hi Jamie,
Ya you are right regarding the globalize , But I may express in wrong
words..
What I need is to add 9 for the calling numbers that appear on the Missed
calls ..I am putting the 9 under the Incoming Calling Party Settings . But
this digit is not appear on the missed calls..
Appreciate
...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *CCIEing
*Sent:* 15 March 2013 10:49
*To:* Jamie Parr (jamparr)
*Cc:* CCIE Study
*Subject:* Re: [OSL | CCIE_Voice] Globalizing on mgcp vg
** **
Hi Jamie,
Ya you are right regarding the globalize , But I may
Party National
Number prefix* and add 9 there
**2) **Issue no mgcp , mgcp .Then dial again and you should see in
the directory 9 in front of national calls
** **
** **
Regards
** **
** **
*From:* CCIEing [mailto:aboaz...@gmail.com]
*Sent:* 15 March 2013 11:04
Hi Bill,
The call is in type of national, I already applied the prefix , but it seems I
did not issue the no mgcp/mgcp.
Sent from my iPhone
On Mar 15, 2013, at 1:11 PM, Bill whl...@gmail.com wrote:
So the number comes in a MGCP GW and you want to change it from 555-1234 to
9555-1234 is
Hi Friends..
I have question on the MOH multicast, In case we have HQ and SiteB are
connected to the same CUCM cluster, and we need to enable the the
multicasting to be used with MOH.
Which interfaces on both router should we enable the Multicast traffic ,
and based on which criteria ??
Cheers
11, 2013, at 3:52 PM, CCIEing wrote:
Hi Friends..
I have question on the MOH multicast, In case we have HQ and SiteB are
connected to the same CUCM cluster, and we need to enable the the
multicasting to be used with MOH.
Which interfaces on both router should we enable the Multicast traffic
Hi all,
I always has leak of understanding regarding the dspfarm command..some
times they use it with the no command under the voice-card x mode..
Can any one explain more about this command.. Why we use it and how to use
it in the correct way..
appreciate your input in advance
no dspfarm
dsp
Hi Jason,
I have question about step # 9 clear counters
is it the normal clear counter command?
e.x: E1 card
clear counter interface s x/y/z:15
Thanks
On Wed, Feb 27, 2013 at 3:02 PM, Jason Lee jas7...@gmail.com wrote:
I use this as a strategy for checking my gateway configuration
Ensure
Hi All,
For site B let us say that the lab ask us to configure it as H323 gateway,
and the question mentioned that call have to go to SUB CUCM then to PUB,
in that case we have to create the 2 voip dial peers pointing to sub and
PUB as below :
My question here , in order to make sure the
g711ulaw
dtmf-relay h245-alphanumaric h245-siganal cisco
no vad
On Sat, Mar 9, 2013 at 11:14 PM, CCIEing aboaz...@gmail.com wrote:
Hi All,
For site B let us say that the lab ask us to configure it as H323 gateway,
and the question mentioned that call have to go to SUB CUCM then to PUB
-peer to preference 1 and the
pub to preference 2. Either way, I would hard code it.
Amp
Quoting CCIEing aboaz...@gmail.com:
I am sorry the below dial-peers should be :
dial-peer voice 2 voip
destination-pattern 12341$
session target ipv4:Sub_IP_Address
codec g711ulaw
dtmf-relay h245
Hi all,
When it comes to the configuration of the T1/E1, how we can know the isdn
switch type that must be used ?
Thanks in advance
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP
has E1 controller then the isdn switch type
is *isdn switch-type primary-net5*
** **
** **
*From:* ccie_voice-boun...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *CCIEing
*Sent:* Παρασκευή, 8 Μαρτίου 2013 4:31 μμ
*To:* ccie_voice
Hello All,
The following question cross my mind while doing the NTP configuration
stuff..
What is the difference between the Phone NTP reference configuration in the
CCM Web administration page
and
The NTP reference on the OS Administration page??
does the 1st one for the endpoints where the
Oh thanks a lot for your input.
Appreciated ..
On Tue, Mar 5, 2013 at 12:48 AM, Cory Gray corygray22...@hotmail.comwrote:
Phone ntp reference is for SIP phones only
Sent from my iPhone
On Mar 4, 2013, at 4:42 PM, CCIEing aboaz...@gmail.com wrote:
Hello All,
The following question
Hi All,
I need to know if anyone has information about the IPexpert rack rental, I
bought a sessions from IpExpert site, but now i am not able to find where
to schedule my sessions?
appreciate your help guys.
___
For more information regarding
/products_tech_note09186a008029e6d5.shtml
Here is the link you want to use to setup IPPA
*http://xxx.xxx.xxx.xx:/ipphone/jsp/sciphonexml/IPAgentLogin.jsp
*
On Sat, Jan 26, 2013 at 3:28 PM, CCIEing aboaz...@gmail.com wrote:
Hi All,
I am suffering the *Cannot connect to the IP Phone Agent
Yes Man,
I restarted it, the same error still occurs !!!
On Sat, Jan 26, 2013 at 11:59 PM, Gurpreet Singh Kukreja
tycoononway1...@gmail.com wrote:
Hey Man,
Tried restarting the BIPPA service from CCX yet?
- G
On Sat, Jan 26, 2013 at 4:28 PM, CCIEing aboaz...@gmail.com wrote:
Hi All
I want to add the following information:
These 2 services are not able to start:
Cisco Desktop LDAP Monitor Service
Cisco Desktop Sync Service
On Sun, Jan 27, 2013 at 10:57 PM, CCIEing aboaz...@gmail.com wrote:
Yes Man,
I restarted it, the same error still occurs !!!
On Sat, Jan 26
Not forget to mention that I have changed the IP address of the server
using ! Is that related to my problem..
Appreciate your help, as this issue take a lot of my time :(
On Sun, Jan 27, 2013 at 11:12 PM, CCIEing aboaz...@gmail.com wrote:
I want to add the following information:
These 2
, CCIEing aboaz...@gmail.com wrote:
Not forget to mention that I have changed the IP address of the server
using ! Is that related to my problem..
Appreciate your help, as this issue take a lot of my time :(
On Sun, Jan 27, 2013 at 11:12 PM, CCIEing aboaz...@gmail.com wrote:
I want to add
Hi All,
I am suffering the *Cannot connect to the IP Phone Agent service* error,
when try to browse the url
*http://uccx_IP_address:6293/ipphone/jsp/sciphonexml/IPAgentInitial.jsp*;
I am not able to continue the configuration of the IP Phone agent.
I have changed the Ip address of the
Hi all,
How much (important and mandatory) is adding the CUC or CUPS to the CUCM as
Application Server?
thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking
Hi All,
I was practicing the cisco Documentation CD that will be available during
the lab http://www.cisco.com/cisco/web/psa/default.html
to get used on it, I was searching for the topic in unity connection How
to set up the Phone View ,this topic is mentioned in the System
Administration for
to navigate through.
Sent from my iPhone
On Jan 14, 2013, at 11:18 AM, CCIEing aboaz...@gmail.com wrote:
Hi All,
I was practicing the cisco Documentation CD that will be available during
the lab http://www.cisco.com/cisco/web/psa/default.html
to get used on it, I was searching for the topic
Hello Guys,
The following question passed my mind while I am practicing the LiveRecord
feature under the CUE topic.
What type of conference should we used for the purpose of configuring the
Liverecord under CUE task, is it the
- Ad-hoc conference , just like below configuration example :
Hello Friends,
I have a small question about the exam, does the Tab (to complete commands
) in the routers CLI is enabled ?
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or
Oh thanks a lot guys ..
On Thu, Jan 10, 2013 at 3:31 AM, Gurpreet Singh Kukreja
tycoononway1...@gmail.com wrote:
Yup
On Wed, Jan 9, 2013 at 6:26 PM, CCIEing aboaz...@gmail.com wrote:
Hello Friends,
I have a small question about the exam, does the Tab (to complete
commands
So, What type of MWI is better to use ??
outcalling , unsolicited , or sub-notify ??
On Thu, Jan 10, 2013 at 3:58 AM, CCIEing aboaz...@gmail.com wrote:
Oh thanks a lot guys ..
On Thu, Jan 10, 2013 at 3:31 AM, Gurpreet Singh Kukreja
tycoononway1...@gmail.com wrote:
Yup
On Wed, Jan 9
Hi All,
I configured a user in the CUE to send broadcast message, he is able to
send the message, the MWI ON appear on the phone, but when recipient hear
the broadcast message and the message deleted, the red alarm and the
envelop does not disappear , the MWI OFF is not working, until I perform
that any mailboxes that have not listened to the
message will never receive it and the MWI state is turned off (unless there
are other new messages in the mailbox).
On Wed, Jan 9, 2013 at 1:02 AM, CCIEing aboaz...@gmail.com wrote:
Hi All,
I configured a user in the CUE to send broadcast message
** **
** **
** **
On Jan 3, 2013, at 6:26 PM, CCIEing wrote:
** **
Hi All,
** **
I have a question regarding the required method to configure CUE, during
the lab exam, can the ask us to configure the CUE using only command Line?
and not using the GUI at all.
** **
Thanks
Hi All,
I have a question regarding the required method to configure CUE, during
the lab exam, can the ask us to configure the CUE using only command Line?
and not using the GUI at all.
Thanks
___
For more information regarding industry leading CCIE
ISR let me know in case of any further issues*.
Thanks
On Mon, Dec 31, 2012 at 12:05 AM, CCIEing aboaz...@gmail.com wrote:
Dear All,
I am integrating CUE with CME, When I run the initialization Wizard , the
system keep giving me the following message
Login to Call Manager Express
Dear All,
I am integrating CUE with CME, When I run the initialization Wizard , the
system keep giving me the following message
Login to Call Manager Express as Administrator Failed. Check your Call
Manager Express Configuration
I am using a Call Manager Express not on box with the CUE module,
with
it.
On Fri, Dec 28, 2012 at 4:15 PM, CCIEing aboaz...@gmail.com wrote:
Hi All,
I want to make sure that the CUE integration with CUCM is included of the
LAB exam , right ?
Thanks
___
For more information regarding industry leading CCIE
Dear All,
I did the configuration of the CUE - CUCM integration, I was able to import
the users from cucm, also the CTI Ports are registered with the CUCM, more
over I went through the initialization wizard for the CUE, the voice mail
pilot, profile already configured and assigned to phones , the
, CCIEing aboaz...@gmail.com wrote:
Dear All,
I did the configuration of the CUE - CUCM integration, I was able to
import the users from cucm, also the CTI Ports are registered with the
CUCM, more over I went through the initialization wizard for the CUE, the
voice mail pilot, profile already
Dears,
I hear both could be user Putty, SecureCRT.
On Sat, Dec 29, 2012 at 8:24 PM, singh singh8...@in.com wrote:
hi Guys,
I am interesting in knowning the following ...
1) From the CCIE voice lab which is the terminal connnection used ( putty
or crt)?
2)Is it ssh or telnet?
Hi virajith,
You may update all your phone settings using bulk edit.
On Sat, Dec 29, 2012 at 8:36 PM, virajith vir...@rediffmail.com wrote:
hi All,
I am noticing that for my cisco unity connection integrated with CUCM -
the VM pilot and profile that I have made as default VM pilot and
, that why it did not work.
Any way thanks guys a lot for your response .
Ahamd
On Wed, Dec 26, 2012 at 9:25 AM, Abdullin Kamil kabdulli...@gmail.comwrote:
Hi,
For this purpose it is necessary to bring manually the user to CUC,
instead of to import users.
2012/12/26, CCIEing aboaz...@gmail.com
Hi All,
a small question about the system call handlers, when you create a new
system call handler, do we have to stuck with time zone for HQ site? or
just leave it to Use System Default Time Zone.
Thanks in advance
___
For more information regarding
Hi all,
is there any possibility to achieve the following :
*When someone calls from PSTN to phone number 2001 (Br2 Phone1) it should
not say HQ PHONE 1 not available it should say*
*2001 is not available please leave your message after the tone*.
modifying the personal greetings is not
92 matches
Mail list logo
