Hi Guys,
i am trying to configure AAR between 2 sites, when i assign AAR-GROUP and
AAR-CSS on device pool it does not take effect rather i have to apply it
each phone device and GW inorder for it to work.Is there any thing i am
missing
Thanks
___
For
...
-Justin
On Nov 4, 2013 6:57 AM, CISCO CCIE VOICE ccievoic...@gmail.com wrote:
Hi Guys,
i am trying to configure AAR between 2 sites, when i assign AAR-GROUP and
AAR-CSS on device pool it does not take effect rather i have to apply it
each phone device and GW inorder for it to work.Is
Hi Experts,
I am not able to restrict max-call-per-button 2 and busy-trigger-per-button
1 using ephone-template
ephone-dn-template 1
call-forward busy 2220
call-forward noan 2220 timeout 20
huntstop channel 1
ephone-template 1
softkeys remote-in-use Newcall CBarge
max-calls-per-button
Hi Guys,
I am trying to understand the Channel selection order, i know that if
TELCo is using bottom Up then i have to use opposite Direction i.e Top
Down .My Telco is uses last channel for IN-bound calls and set Top down on
my side for OUT-bound calls but still i can see that its taking bottom
the B channel selection order is not bound to your telco
configuration.
You can set top-down or bottom-up with no issue at all.
hth
lorenz
On Wed, Jul 3, 2013 at 10:58 AM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
Hi Guys,
I am trying to understand the Channel selection order, i know
Hi Michal,
As i can see that Clock source line command which is by default enable
further can u give an example for both User Side and Network Side
means can u past the commands that indicates both user and Network Side
Thanks
On Mon, Jul 1, 2013 at 7:00 PM,
Thank You Michael, Question asked about L1 should me NETWORK SIDE and L2
USER SIDE in that case
controller t1 0/0/0
clock source line -L1 Network Side (This is by default
enable no need to add it)
and for L2: USER SIDE do we need to add any additional commands under
serial
and Implementing Cisco Unified Communications on Unified
Computing Systems”
** **
*From:* CISCO CCIE VOICE [mailto:ccievoic...@gmail.com]
*Sent:* Monday, July 01, 2013 12:58 PM
*To:* Sears, Michael (msears)
*Cc:* ccie_voice@onlinestudylist.com
*Subject:* Re: CCIE_Voice Digest, Vol 89, Issue 4
Hi Todd,
Please add the below commands and let me know the result...
voice service voip
allow-connections h323 to h323
h323
emptycapability
h225 id-passthru
h225 connect-passthru
Thanks
On Wed, Jun 26, 2013 at 5:38 AM, ccie_voice-requ...@onlinestudylist.comwrote:
Send CCIE_Voice
codec g729abr8
On Sun, Jun 23, 2013 at 12:20 AM, Bill Lake whl...@gmail.com wrote:
Try doing all command not just these
Sent from my iPhone
On Jun 22, 2013, at 6:51 AM, CISCO CCIE VOICE ccievoic...@gmail.com
wrote:
Thanks Bill for your reply,
I have done no service app-b-acd
AM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
Hi,
I am trying to Remove B-ACD configuration but still showing in the
running configuration i have restarted the router but no look any guess?
thanks
___
For more information regarding
: Example
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40bacd.html
On 22/06/2013 4:18 PM, CISCO CCIE VOICE ccievoic...@gmail.com wrote:
application
no service app-b-acd
no service app-b-acd-aa
On Sat, Jun 22, 2013 at 9:06 AM, Somphol Boonjing somp
: Embedded Call-Queue and AA Tcl Scripts: Example
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40bacd.html
On 22/06/2013 4:18 PM, CISCO CCIE VOICE ccievoic...@gmail.com wrote:
application
no service app-b-acd
no service app-b-acd-aa
On Sat, Jun 22, 2013
HI experts,
I am trying to remove B-ACD cnofigs from the router but still show in
running config,i have reloaded the router but still no luck any guess ?
Thks
___
For more information regarding industry leading CCIE Lab training, please visit
Hi,
I am trying to Remove B-ACD configuration but still showing in the running
configuration i have restarted the router but no look any guess?
thanks
___
For more information regarding industry leading CCIE Lab training, please visit
group before the call is sent to an alternate
destination number.
•*seconds*—Maximum period of time, in seconds. The range is from 30 to
3600. The default is 600.
On Mon, Jun 17, 2013 at 5:11 PM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
hi experts,
I am trying to understand timer
hi experts,
I am trying to understand timer for *param* *max-time-call-retry can
anyone share there knowledge about how does it effect the bacd script and
the purpose of this field*
*
*
*Thnks*
* *
___
For more information regarding industry leading
Hi,
How can i verify that UCCX is using G729 codec native
Thnajs
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Hi,
How can i verify that UCCX is using G729 codec native
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
System and select System Parameters
—
Sent from Mailbox https://www.dropbox.com/mailbox for iPad
On Sun, Jun 16, 2013 at 3:37 AM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
Hi,
How can i verify that UCCX is using G729 codec native
Thnajs
wrote:
Hi,
I think the easiest way is to check UCCX Service Parameters under System
menu.
--Somphol.
--Somphol
On Sun, Jun 16, 2013 at 7:36 PM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
Hi,
How can i verify that UCCX is using G729 codec native
Thanks
-Systems-AOS/109484829074064
| LinkedIn http://www.linkedin.com/company/aos
Sent from an Apple iOS device with very tiny touchscreen input keys.
Please excude my typtos.
On Jun 16, 2013, at 8:14 AM, CISCO CCIE VOICE ccievoic...@gmail.com
wrote:
After i configure UCCX with codec g729 under
connections. Otherwise you would get a busy signal if
region said g729 and CCX was set for g711.
Sent from an Apple iOS device with very tiny touchscreen input keys.
Please excude my typtos.
On Jun 16, 2013, at 9:41 AM, CISCO CCIE VOICE ccievoic...@gmail.com
wrote:
Thanks Bill
fairly quickly. Good luck.
Sent from an Apple iOS device with very tiny touchscreen input keys.
Please excude my typtos.
On Jun 16, 2013, at 10:06 AM, CISCO CCIE VOICE ccievoic...@gmail.com
wrote:
I have Branch 2 site which contains Transcoder moreover all my agents
are in Branch-2
Hi experts,
i am also searching for that solution thanks i will also try that and let
u know, which command i need to run on SB gateway to get the output,do i
need call start fast under voice service voip in SB gateway ?
Thanks
On Tue, May 21, 2013 at 11:41 AM,
, 2013 at 10:21 PM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
HI experts,
When the Phones are in CME SRST its does not shows Extension on Phone
display this happens when i change the name +86223033001 to SiteC Phone 1
under Ephone-dn's
Thnks
HI experts,
When the Phones are in CME SRST its does not shows Extension on Phone
display this happens when i change the name +86223033001 to SiteC Phone 1
under Ephone-dn's
Thnks
___
For more information regarding industry leading CCIE Lab training,
Hi Experts,
How can i send Calling name to PSTN over MGCP and H323 Gateway?
thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
Hi Experts,
When i dial UCCX Trigger i am not able to play custom welcome prompt rather
its playing MOH.
thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking
Hi Experts,
I am getting an error i am sorry we r currently facing system problm and r
unable t process ur call during CSQ
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or
-- Overwrite the Script -- Then Refresh The Script
5-Refresh the Application Script
Then you should be good to go
Thanks,
Hesham
On 29 April 2013 23:03, CISCO CCIE VOICE ccievoic...@gmail.com wrote:
Hi Experts,
I am getting an error i am sorry we r currently facing system
I am facing the same problem when is use default icd.aef script
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
/Focus/sip-early-media-early-offer-en.html
On Sun, Apr 28, 2013 at 2:51 AM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
Thank you suresh i will check ths on my pod...
On Sun, Apr 28, 2013 at 11:26 AM, Suresh Bhandari bring...@gmail.comwrote:
Content Length 0 means, there will be an OK
Hi Experts
Which method to be use in CCIE Voice lab exam in order to configure MGCP
Auto or Manually.
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for
HI Thanks,
but if suppose i want to use 6 channel from T1 PRI on HQ Router and 12
channel of E1 PRI from Branch-2 router,so how can i busy out channels under
service parameter ? and how does CUCM knows about which router interface to
busy out as i have two site with different fractional PRI
Any
HI Experts,
Which SIP Message contains Delay Offer and Early Offer message ? i i am bit
confuse as some documents says SIP INVITE message contains both Delay and
Early Offer and some documents say its SIP 200 OK message
Thanks
___
For more
message and so its an early offer.
HTH
On Sun, Apr 28, 2013 at 1:15 PM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
HI Experts,
Which SIP Message contains Delay Offer and Early Offer message ? i i am
bit confuse as some documents says SIP INVITE message contains both Delay
and Early Offer
that represents your gateway.
Further, you have to check Enable status Poll in your gateway page.
Hope this helps.
On Sun, Apr 28, 2013 at 12:45 PM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
HI Thanks,
but if suppose i want to use 6 channel from T1 PRI on HQ Router and 12
channel of E1
Thank you suresh i will check ths on my pod...
On Sun, Apr 28, 2013 at 11:26 AM, Suresh Bhandari bring...@gmail.comwrote:
Content Length 0 means, there will be an OK followed with SDP So
basically both are same.
On Sun, Apr 28, 2013 at 1:56 PM, CISCO CCIE VOICE
ccievoic
HI experts,
When Branch-2 MGCP router is in CME SRST mode ,i am unable to see Alerting
message on inbound call from PSTN,moreover when i call from PSTN my call
is directly connected and there is no ring back tone ,Can any one help to
fix the issue.
ISDN Se0/0/0:15 Q931: RX - SETUP pd = 8
Hi Guys,
Can i group H323 GW and SLRG in one Route List ? it that the best practice
?can any one provide me with the reference for best practice to which
protocol in can group together like h323, mgcp,sip trunk,GK Trunk ect in
to Route List.
Thanks
Hi Guys,
Regarding E1 Framing if the question states the below
FOR E1 use the following:
switch type:net5
framing :CRC
linecode :HDB3
then do i need to use the NO-CRC or CRC ?
___
For more information regarding industry leading CCIE Lab training,
Hi guys,
what is the difference between IE display and display IE command
interface Serial0/1/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
isdn bind-l3 ccm-manager
isdn outgoing *display-ie VS ie dislay*
isdn outgoing ie redirecting-number
is allowed
and
*isdn outgoing ie ?
*
...
displayDISPLAY IE in outgoing ISDN messages is allowed
...
so this may be otherwise option for the same display-ie.
Any other views?
On Mon, Apr 1, 2013 at 5:06 PM, CISCO CCIE VOICE
ccievoic...@gmail.comwrote:
Hi guys,
what
Hi Experts,
Can any one share there knowledge and experience on how to troubleshoot
one-way audio when the call is answer from PSTN phone which messages do i
need to look at on RTMT and which traces do i need to enable on CUCM to
check the One way audio problem ..
Thanks
Hi experts,
i have been trying to test the Call forward unregister whn the call arrive
on destination phone its show on the display as FORWARD,FOR and BY on the
phone screen so is there a way to display FROM on the destination phone
screen
thanks
___
Hi experts,
i am facing a problem with CUCM DHCP ,my phones are taking an ip address as
first IP from starting range and so on actually it has to take last ip
first and so on
eg: CUCM DHCP range :177.1.11.10 -177.1.11.30
MY phones getting an ip as 177.1.11.10
Hi Experts,
can any one help me I want to create directory folder on router without
formatting flash when i use mkdir command its saying that invalid input
thnks
___
For more information regarding industry leading CCIE Lab training, please visit
/configuration/guide/b_cflash.html#wp23144
** **
** **
*From:* ccie_voice-boun...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *CISCO CCIE VOICE
*Sent:* Tuesday, March 12, 2013 10:51 AM
*To:* ccie_voice@onlinestudylist.com
*Subject:* [OSL
HI experts,
If the question ask to configure H323 Trunk to backbone router then in that
do i need to configure it as H323 Gateway or H323 Non -GK controlled trunk?
Thnks
___
For more information regarding industry leading CCIE Lab training, please
Hi Experts,
Can anyone explain me how to collect h323 trunk debugs from RTMT ...
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
HI Guys,
Can any one Share H323 and SIP Trunk configuration that need to be done on
PSTN Router in order for it to work properly ...
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you
: Phone NTP Reference Vs NTP Reference (CCIEing)
5. AAR HELP (CISCO CCIE VOICE)
6. Re: AAR HELP (Jamie Parr (jamparr))
7. Re: AAR HELP (CISCO CCIE VOICE)
--
Message: 1
Date: Tue, 5 Mar 2013 00:15:37 +0300
From
HI All
When the Branch-1 is in SRST Proper Mode (call-manager-fallback) When i am
trying t press voice mail button its playing system greeting not the user
greeting ,its there any thing i need do on CUCM in order to play user
greeting when the phones are in SRST..
Thanks
Hi experts,
Can any one help me to understand the below Question
Call from HQ to Branch-2 should invoke AAR base on RSVP bandwidth,If
HQPH1 calls BR2PH1 then it should display E.164 number and Network
congestion Re-routing Message on Phone
So ,my doubt is that do i need to use AAR and
...@cisco.com
Phone: *+44 20 8824 2641*
Mobile: *+44 7590622049*
** **
*From:* ccie_voice-boun...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *CISCO CCIE VOICE
*Sent:* 05 March 2013 08:13
*To:* ccie_voice@onlinestudylist.com
*Subject:* [OSL
Hi,
Is it safe to use BAT in real lab exam?
thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
.
__
** **
From: CISCO CCIE VOICE ccievoic...@gmail.com
Date: Tuesday, February 26, 2013 2:44 PM
To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Using BAT in LAB
Hi,
Is it safe to use BAT
HI,
Does MWI works on SRST Proper mode (call-manager-fallback).?
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
Hi
Can any one help me with Dial Plan consideration when calling from HQ Site
to Branch 1 Site,following what i have configure.But the problem is that on
B1PH1 screen its showing as below
*From +14082021001
Forward by:2001*
*HQ SITE:*
*Extension Range*:1XXX
*Partition:*Branch_1_SRST_PT
, 2013, at 6:45 AM, CISCO CCIE VOICE ccievoic...@gmail.com
wrote:
Hi
Can any one help me with Dial Plan consideration when calling from HQ Site
to Branch 1 Site,following what i have configure.But the problem is that on
B1PH1 screen its showing as below
*From +14082021001
Forward by:2001
HI
When in SRST either SRST Proper or CME as SRST ,when i call from HQ to
branch office do i need to assign unregistered DN in order to have ext to
ext calling working case of WAN fails
___
For more information regarding industry leading CCIE Lab
62 matches
Mail list logo