AM i in right forum guys no message here anyone around
Ping ___
Free CCIE RS, Collaboration, Data Center, Wireless Security Videos ::
iPexpert on YouTube: www.youtube.com/ipexpertinc
When I am applying ip pim sparse-dense mode on virtual template 200 of HQ
and BR1 routers,
Which are connected by Frame relay ,. The Two routers stop pinging each
other.
What could be the issue.??
___
For more information regarding industry leading CCIE
Hi
i am going for ccie voice lab in November.
can anyone guide if i get ccie number then after 14th Feb 2014 ,my ccie no will
be valid or not
Sent from Samsung Mobile___
For more information regarding industry leading CCIE Lab training, please
No you will still be a CCIE
You will just be in a retired track
You will be able to upgrade to CCIE collaboration by passing the CCIE
collaboration written exam
Good luck on you lab
Sent from my iPhone
On Jul 8, 2013, at 12:22 PM, Dharambirku dharambi...@gmail.com wrote:
Hi
i am going
Dear All,
Whats is the real meaning of MGCP tear down. Is it means dropping a call or
, What ? thanks for your valuable input.
Ravi,
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP
Hey ravi,
I believe it means that mgcp packets was disrupted in between transmission
resulting in packet loss etc. This error implies that there is a bug in the
ios. Try upgrading the ios and check
Regards
Shabeeb
On 21 May 2013 04:28, ie ravindra ieravin...@gmail.com wrote:
Dear All,
Whats
Hi
I have one query please guide..
One user is complaining that MWI light not work if new voice msg comes but when
5 new messeges are stored on unity express then light goes on.
So where is the issue on
Looking forward to ur response
Thanks
Dharambir
Cme and unity express
Sent from Samsung
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Dear All On Board,
I am in approach for the exam in coming June. Unfortunately due to my
fathers illness I was not covered all the subject areas. I have covered
only conceptual parts. I am not wanted to loose my exam at the first time.
I want to do it however with outstanding performance. What
--
Thanks Regards
Abhishek Bansal
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
winmasterp...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Overlapping route patterns
Message-ID:
CAKsL8KB9k2=w5efs8yoww6ghsyojnt0+yiatitjouqjrwso...@mail.gmail.com
Content-Type: text/plain; charset=iso-8859-1
Hi,
I have the following route patterns on CUCM
http://fatloss.acaiberrysupplementsite.com/wp-content/uploads/fgallery/tokare.html?cl=unydqk
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or
http://mimi-knoop.com/wp-content/themes/organic_portfolio_white/work.php?wonder53.jpg___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
Hey, dude! Look at this! You will be really surprised!...
http://www.cercasa.it/comp.link.php?rjwgoogleId=08e0
___
For more information regarding industry leading CCIE Lab training, please visit
Please unsubscribe me from this list.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Did you enable it in Service Parameters?
HTH
From: Ray jonha...@yahoo.com
Reply-To: Ray jonha...@yahoo.com
Date: Fri, 26 Aug 2011 08:32:19 -0700 (PDT)
To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] (no subject)
when i dial 3033300 from 525
)
To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] (no subject)
when i dial 3033300 from 525 pstn 2nd and put the pin 12345, MVA IVR
ask me to press 2 to turn on the remote dest or press 3 to turn it off.. it
doesnt let me dial any extension
@onlinestudylist.com
Sent: Saturday, August 27, 2011 8:50 PM
Subject: Re: [OSL | CCIE_Voice] (no subject)
check also did the mva was enable for the user under end user page.
On Sat, Aug 27, 2011 at 1:00 AM, Mini Me cciev.min...@gmail.com wrote:
Did you enable it in Service Parameters?
HTH
when i dial 3033300 from 525 pstn 2nd and put the pin 12345, MVA IVR ask me
to
press 2 to turn on the remote dest or press 3 to turn it off.. it doesnt let me
dial any extension.. help
SB#sho run
Building configuration...
Current configuration : 5001 bytes
!
! Last configuration change
Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm
the status reject, I am sure the MAC and phone type in the cucm is add
correctly.
Thanks.
La informaci?n incluida en este mensaje y sus anexos es CONFIDENCIAL y para USO
If the phone is added as SCCP in but is running SIP firmware that can cause the
problem, also make sure you have a non-secure profile set on the phone too.
On Jun 19, 2011, at 11:49 AM, Santiago Figueroa wrote:
Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm
the
db replication problems?
On Sun, Jun 19, 2011 at 4:49 PM, Santiago Figueroa sfigue...@mnet.com.mxwrote:
Hello I have a doubt what is reason the ip phone 7941 do not registered
to cucm the status reject, I am sure the MAC and phone type in the cucm is
add correctly.
** **
Thanks.
, 19 de Junio de 2011 12:20 p.m.
Para: Santiago Figueroa
CC: ccie_voice@onlinestudylist.com
Asunto: Re: [OSL | CCIE_Voice] (no subject)
If the phone is added as SCCP in but is running SIP firmware that can cause the
problem, also make sure you have a non-secure profile set on the phone too
just make sure that the phone model is *7941 *or *7941G*..
check, try and update :)
On Sun, Jun 19, 2011 at 7:49 PM, Santiago Figueroa sfigue...@mnet.com.mxwrote:
Hello I have a doubt what is reason the ip phone 7941 do not registered
to cucm the status reject, I am sure the MAC and phone
| CCIE_Voice] (no subject)
just make sure that the phone model is 7941 or 7941G..
check, try and update :)
On Sun, Jun 19, 2011 at 7:49 PM, Santiago Figueroa
sfigue...@mnet.com.mxmailto:sfigue...@mnet.com.mx wrote:
Hello I have a doubt what is reason the ip phone 7941 do not registered to cucm
Santiago,
This is a question I would expect from an end user; not someone who's
preparing for the CCIE Lab. Please do your homework; get detailed sdi/sdl
traces, app logs, packet captures and if those don't give you the answer;
forward them to me and I'll take a look at them.
Please don't take
it could be a replication problem
if it says reject reset the phone quite a few times and it will register
eventually
2011/6/19 Santiago Figueroa sfigue...@mnet.com.mx
Hello I have a doubt what is reason the ip phone 7941 do not registered
to cucm the status reject, I am sure the MAC and
| CCIE_Voice] (no subject)
just make sure that the phone model is 7941 or 7941G..
check, try and update :)
On Sun, Jun 19, 2011 at 7:49 PM, Santiago Figueroa
mailto:sfigue...@mnet.com.mxsfigue...@mnet.com.mxmailto:sfigue...@mnet.com.mx
wrote:
Hello I have a doubt what is reason the ip phone 7941
-7941G
My ip phone in cucm
image002.jpg
Thanks.
De: shabeeb mohammed [mailto:shabeebc...@gmail.com]
Enviado el: Domingo, 19 de Junio de 2011 12:29 p.m.
Para: Santiago Figueroa
CC: ccie_voice@onlinestudylist.com
Asunto: Re: [OSL | CCIE_Voice] (no subject)
just make sure
http://infoj.org/indexz36X.php
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://classic-clay.com/indexz35X.php
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://www.apartmentsindowntowndallas.com/inside.html
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Hello,
Ap per Ipexpert's voice topology, I purchased 5 IP Phones which I use to
practice. Do I need to get 2 additional IP Phones to practice all the
scenarios? For example, Calls from SIP to SIP , from SCCP to SIP, SIP to SCCP,
and SCCP to SCCP. I want each location to have 2 IP Phones (SIP
To replicate the lab scenario you should have 3 phones at hq, 2 at sites
br1/br2
and 1 pstn phone. Pstn phone can be 7960. Others should be 7965 or 7962 for
most accuracy.
--
On Apr 2, 2011, at 2:36, Mohamed Gazzaz mgaz...@hotmail.com wrote:
Hello,
Ap per Ipexpert's voice
You can use IP Blue soft phone for some applications, especially the PSTN
phone.
You can use X-Lite for SIP phone and you can also share phones between
sites.
Be sure to get the lab version of IP blue so you can run 5 instances at
once. This lets you receive calls very easily so you could take
I had the same problem, maybe 3 weeks ago. The solution was uncheck the
restriction pattern * inside of RESTRICTION TABLES àDEFAULT SYSTEM TRANSFER.
GREETINGS
image001.png___
For more information regarding
Under Restriction Table Default System Transfer Uncheck the Blocked
checkbox for pattern *
It works for me
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
:09 +0800
From: vcc...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] (no subject)
Under Restriction Table Default System Transfer Uncheck the Blocked
checkbox for pattern *
It works for me
___ For more information
to choose from (eg. 1 for new
messages, 2 to send messages,etc).
Thanks in advance
Regards,
Waleed
--
Date: Thu, 28 Oct 2010 18:43:09 +0800
From: vcc...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] (no subject)
Under
might be missing something.
Thanks alot.
Regards,
Waleed
Date: Thu, 28 Oct 2010 18:35:46 -0400
Subject: Re: [OSL | CCIE_Voice] (no subject)
From: david.a...@gmail.com
To: walid...@hotmail.com
CC: vcc...@gmail.com; ccie_voice@onlinestudylist.com
Hi Waleed,
The question says - Users
Hello Everyone,
Iam asked to configure unity connection to allow phones with mailbox to press
message button and then can be transferred to any number during opening
greeting. This can be done by callers with no mailbox but not ones with
mailboxes. The solution guide solves this by checking
Hi,
you also need to adjust the default restriction table and configure proper
CSS for the voicemail ports / SIP trunk (+contact line)
regards
kobel
2010/10/27 Waleed Elhadidy walid...@hotmail.com
Hello Everyone,
Iam asked to configure unity connection to allow phones with mailbox to
,
Waleed
From: findko...@gmail.com
Date: Wed, 27 Oct 2010 12:43:14 +0200
Subject: Re: [OSL | CCIE_Voice] (no subject)
To: walid...@hotmail.com
CC: ccie_voice@onlinestudylist.com
Hi,
you also need to adjust the default restriction table and configure proper CSS
for the voicemail ports / SIP
: Wed, 27 Oct 2010 12:43:14 +0200
Subject: Re: [OSL | CCIE_Voice] (no subject)
To: walid...@hotmail.com
CC: ccie_voice@onlinestudylist.com
Hi,
you also need to adjust the default restriction table and configure proper
CSS for the voicemail ports / SIP trunk (+contact line)
regards
kobel
?
Regards,
Waleed
Date: Wed, 27 Oct 2010 08:26:17 -0400
Subject: Re: [OSL | CCIE_Voice] (no subject)
From: prashantpatel...@gmail.com
To: walid...@hotmail.com
CC: findko...@gmail.com; ccie_voice@onlinestudylist.com
Hi Waleed,
What is the pt and css you are using for the VM ports. They should
Conversation.
Regards,
Waleed
From: clmar...@bryantx.gov
To: walid...@hotmail.com
CC: ccie_voice@onlinestudylist.com
Date: Wed, 27 Oct 2010 08:33:30 -0500
Subject: RE: [OSL | CCIE_Voice] (no subject)
Waleed,
Do not enter your password when prompted, just press # that should transfer you
...@bryantx.gov
CC: ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] (no subject)
Date: Wed, 27 Oct 2010 16:05:30 +0200
I skipped pin when logging and tried pressing # then extension, but still
didn't work. The phone menu of the user is what Iam transferred to after login,
not opening
Hi,
In PL WB 1 Lab 6 and onwards in the config tasks -prerequisites I see a NOTE:
If you are using your own hw cisco 7961 phones instead of 7962 phones, please
perform the following: first delete all 7962 phones and then run the BAT tool
for phone install. We have laready preprovisioned a file
What type of phones are you using for this scenario? the anormally you have
just mentioned is what i get when using softphones for IPMA.
Pithog oil
___
For more information regarding industry leading CCIE Lab training, please visit
http://www.divittoeditore.com/und9.html
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Can anyone get to http://proctorlabs.com? I'm in the middle of my lab... and
its down :-(
-Chase
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
I face the same for about 45 minutes
On Thu, Sep 9, 2010 at 7:03 PM, chase mergenthal cm3_...@hotmail.comwrote:
Can anyone get to http://proctorlabs.com? I'm in the middle of my lab...
and its down :-(
-Chase
___
For more information
http://ogizujyny.freecities.com/sulygupe.html
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
: ccie_voice@onlinestudylist.com
Sent: Thu, 2 September, 2010 2:32:30
Subject: Re: [OSL | CCIE_Voice] (no subject)
I think I'm going to go to the doctor and just yell, Ouch!. Hahaha
naa all joking aside, I know what you mean.
Quoting Sam Park upperlevelpark...@gmail.com:
This is like one of those
ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] (no subject)
help
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
___
For more information regarding
Group ccie_voice@onlinestudylist.com
*Subject: *[OSL | CCIE_Voice] (no subject)
help
--
___
For more information regarding industry leading CCIE Lab training, please
visit www.ipexpert.com
Dear Friends
I want to Edit IP Address of my Cisco IP Phone Model 7911, when I go to Setting
and and press **# to unlock phone setting, It do unlocl phone setting but when
I go to IP Address section, The Edit Soft key appears but it is disabled.
Any Idea how edit IP address in this
Go to DHCP settings and make it Manual First.
From: asif raza [mailto:asifraz...@hotmail.com]
Sent: Friday, April 02, 2010 9:18 AM
To: CCIE-Voice
Subject: [OSL | CCIE_Voice] (no subject)
Dear Friends
I want to Edit IP Address of my Cisco IP Phone Model 7911, when I go to
Setting
U mean DHCP Server Option on IP Phone Setting??
Best Regards
Asif Raza
From: esa...@sigma-it.net
To: asifraz...@hotmail.com; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] (no subject)
Date: Fri, 2 Apr 2010 10:36:16 +0200
Go to DHCP settings and make it Manual
*
From: esa...@sigma-it.net
To: asifraz...@hotmail.com; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] (no subject)
Date: Fri, 2 Apr 2010 10:36:16 +0200
Go to DHCP settings and make it Manual First.
*From:* asif raza
what you need.
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jean M.
Thewissen
Sent: March-18-10 10:07 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] (no subject)
Anyone can point me
...@onlinestudylist.com] On Behalf Of Jean M.
Thewissen
Sent: March-18-10 10:07 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] (no subject)
Anyone can point me to the best way to monitor unity connection ports?
I need to see info like dnis, rdnis and the like when a call
...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jean M.
Thewissen
Sent: March-18-10 10:07 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] (no subject)
Anyone can point me to the best way to monitor unity connection ports
Anyone can point me to the best way to monitor unity connection ports?
I need to see info like dnis, rdnis and the like when a call comes in.
Is RTMT the right tool for this?
Thx!
___
For more information regarding industry leading CCIE Lab
Hi Jean,
Yes, the RTMT is definitely what you need.
-Original Message-
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jean M.
Thewissen
Sent: March-18-10 10:07 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice
I am up on pod 14 and things are ok. Try just reloading the turning on
and off the equipment that won't load for you. Also on of the Volume 2
labs was mislabaled. Try loading the Final config and see what
results you get.
Jefferson
___
For more
Hi,
With regards to SRST teting on remote lab, please advice me how to test it by
remote ip phones connected via Ezvpn.
Regards,
Nish Tarpara
_
Tell us your greatest, weirdest
just simply stop ccm service.
On Thu, Feb 11, 2010 at 4:16 PM, Nish Tarpara nishi...@hotmail.com wrote:
Hi,
With regards to SRST teting on remote lab, please advice me how to test it
by remote ip phones connected via Ezvpn.
Regards,
Nish Tarpara
--
We
You can use acl to test SRST.
Regards,
Aman
On Thu, Feb 11, 2010 at 8:26 AM, Arun Kumar arunv...@gmail.com wrote:
just simply stop ccm service.
On Thu, Feb 11, 2010 at 4:16 PM, Nish Tarpara nishi...@hotmail.comwrote:
Hi,
With regards to SRST teting on remote lab, please advice me
Ämne: Re: [OSL | CCIE_Voice] (no subject)
Hi,
Just wanted to confirm with my last email that on my last session, i did tried
to use Simulate SRST WAN Failure link but i was't able to test SRST properly,
I will try to check it again today.
Regards,
Nish Tarpara
...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Roger Källberg
Sent: Thursday, February 11, 2010 11:03 AM
To: Nish Tarpara; ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Subject: Re: [OSL | CCIE_Voice] (no subject)
You can put in two host routes that points
]
Skickat: den 11 februari 2010 18:23
Till: Roger Källberg; Nish Tarpara; ccie_voice@onlinestudylist.com;
dle...@ipexpert.com
Ämne: RE: [OSL | CCIE_Voice] (no subject)
Will this place the gateway in fallback? I am assuming if the gateway is
registered as any interface other than the WAN interface
; ccie_voice@onlinestudylist.com; dle...@ipexpert.com
Subject: SV: [OSL | CCIE_Voice] (no subject)
That's the way that I usually do it anyway, for example I did it last week for
a client that has a MGCP VGW in Dublin and wanted to try and verify the SRST
functionality. I was sitting at home, helped
...@cygate.semailto:roger.kallb...@cygate.se
Från: Mark Nigh [mn...@netelligent.com]
Skickat: den 11 februari 2010 19:22
Till: Roger Källberg; Nish Tarpara; ccie_voice@onlinestudylist.com;
dle...@ipexpert.com
Ämne: RE: [OSL | CCIE_Voice] (no subject)
Good idea. One gotcha, if you
Phil,
Good morning. I would look at the settings in UCM on the line on the
device. All the way at the bottom there are some check boxes for
called, Calling and redirected number. Then once the call gets to
Unity use the Port Viewer (??) in RTMT to see what Unity is seeing.
From there you
---
Amy Ryan -- CCIE #24677
Senior Technical Instructor - IPexpert, Inc.
Mailto: mailto:ar...@ipexpert.com ar...@ipexpert.com
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Live Assistance, Please visit: http://www.ipexpert.com/chat
www.ipexpert.com/chat
IPexpert is a premier
Hi Kevin
Thanks for your info. It seems that we will have enough time to complete V3 lab
compared to V2 if OEQ is not a big problem
cheers,
Jerry
From: Kevin Damisch
Sent: Wednesday, October 28, 2009 4:56 PM
To: Jerry Bai ; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice
OEQ = 21 points
Lab = 79 points
2 out 4 correct = 0 points
3 or 4/4 correct = 21 points.
bottomline, you cannot pass the lab unless you answer at least 3 out of
4 questions correctly, since passing score is 80.
HTH
Jerry Bai wrote:
Dear Folks,
I have questions on Open End Questions for
Dear Folks,
I have questions on Open End Questions for CCIE Voice. I know cisco introduce
30 mins core knowledge questions before lab. Will 4 OEQ questions be scored
and carry to your total lab points?
Cheers
Jerry
___
For more information
concentration on the remaining lab sections.
Thanks,
Kevin
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jerry Bai
Sent: Wednesday, October 28, 2009 12:29 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] (no subject
Hi Folkas!
I need some clarifications on the Voice written exm.
1) Any change in the Voice written exam
2) UCM which version we have to foucus on ? [ For SRND]
___
For more information regarding industry leading CCIE Lab training, please
I just retook the test a few weeks ago as it had been nearly three
years since I passed it the first time.
It's basically a cross sampling of everything required for the ccvp.
In terms of knowledge base it is closer to a v2 lab than v3. It still
has alot of the older technolgies on there.
wmcallis...@vccs.edu
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
How srst license differ from ccme license ?
how to upgade the srst licese to ccme llicense or vice-versa ?
Thanks to all
[cid:image001.jpg@01C9AD5C.BCF24400]
[cid:image002.gif@01C9AD5C.BCF24400]
With best regards,
inline: image001.jpginline: image002.gif
Hi guys,
Is there anyone can help me?
I am wondering which Cisco Unity Express version I need to use for prepare the
voice lab? Thanks.
Jeffrey
Its 2.3.4 for version 2
- Basant
On Sun, Mar 1, 2009 at 8:08 AM, jeffrey liujian
jeffrey_liuj...@yahoo.comwrote:
Hi guys,
Is there anyone can help me?
I am wondering which Cisco Unity Express version I need to use for prepare
the voice lab? Thanks.
Jeffrey
alex.arsen...@gmail.com
Subject: Re: [OSL | CCIE_Voice] IPCC Agent Logged In But Not in Ready
State
To: kamal yousaf lovingprin...@gmail.com,
ccie_voice@onlinestudylist.com
Message-ID: db9a0601e14d4d60b36e4d04125b4...@jnpr.net
Content-Type: text/plain; charset=iso-8859-1
I found
Narinder, thanks for your reply. The DB was corrupted.
During the IPCC installation, the system says to do not restart CRS Engine
at any node for 10 minutes.
But, after few minutes I've alredy configured the jtapi and I did restart
the CRS. So...
Cheers, Sergio.
You cannot configure a zone prefix when you have e.164 numbers registered to the gatekeeper, so you can configure them to not register themselves, however, if you configure an ATA as a gateway, is there a way to also not register the extensions.
C7200-GK(config-gk)#zone prefix local
This is correct - but a simple - shut, configure, no shut - will do
the trick :)
IOS allows this as of 12.4.15T btw.
Mark Snow
Sr Technical Instructor
IPexpert, Inc.
Sent from my iPhone
On Mar 5, 2008, at 6:48 AM, Mike Reid [EMAIL PROTECTED] wrote:
You cannot configure a zone prefix when
I need to provision some trunks going into CME and using scripting done in CME.
Can someone please give me some guidance on this request?
Negotiate with telco to point existing 800# lines into the CME trunks.
Conduct appropriate scripting activiteis to make 800#s functional
What do you mean scripting?
To the first point, you'll have to deal with your telco to have them
point 800 numbers inbound. Will they just be routing an 800 number to
your existing DID's (like remote call-forward) or will the 800 numbers
be assigned directly to your circuits and they'll
95 matches
Mail list logo