anks,
Viki
From: vignesh sethuraman
To: "ccie_voice@onlinestudylist.com"
Sent: Wednesday, 6 February 2013 10:51 AM
Subject: Re: [OSL | CCIE_Voice] CCIE Voice - IPX Vol1 - Lab 4A - Task 4.7
Hello All,
The solution for my issue was both the H323 trunk and Gatekeeper cont
raman
Cc: "ccie_voice@onlinestudylist.com"
Sent: Tuesday, 5 February 2013 8:25 PM
Subject: Re: [OSL | CCIE_Voice] CCIE Voice - IPX Vol1 - Lab 4A - Task 4.7
I ran into this same problem. if you check "Enable Inbound FastStart" on you
H323 gateway that should correct the proble
Do you have CUBE on gatekeeper as well? Try resetting "Wait for incoming
H.245 TCS" checkbox on the Trunk configuration in CUCM.
Sergey
On Tue, Feb 5, 2013 at 1:34 PM, vignesh sethuraman wrote:
> Hello,
>
> In the task 4.7 of IPX Vol1 Lab 4A, am able to call and answer the calls
> to BR2 from
I ran into this same problem. if you check "Enable Inbound FastStart" on
you H323 gateway that should correct the problem. Its caused because you
are communicating between a SIP trunk and an H323 trunk.
On Tuesday, February 5, 2013, vignesh sethuraman wrote:
> Hello,
>
> In the task 4.7 of IPX
Hello,
In the task 4.7 of IPX Vol1 Lab 4A, am able to call and answer the calls to BR2
from HQ and BR1.
But when I dial HQ phones or BR1 phones from BR2, am getting a ring back tone
but I could not answer the calls. Even after picking the handset, I could hear
the ringback on the BR2 phones.