--
From: Miron Kobelski findko...@gmail.com findko...@gmail.com
Sent: Fri, Jun 03, 2011 11:51:03 Am
To: Friderich Claude cfrider...@netcore.lu cfrider...@netcore.lu
CC: CCIE VOICE
ccie_voice@onlinestudylist.comccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] DHCP Debug in CUCM
Utils network capture
On Jun 3, 2011 1:55 AM, Cristobal Priego cristobalpri...@gmail.com
wrote:
how do you do the packet capture from the cucm cli ?
2011/6/2 Miron Kobelski findko...@gmail.com
Hi,
I was unable to find anything better then packet capture on CUCM CLI - it
allows you to see
***
*From:* ccie_voice-boun...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Miron Kobelski
*Sent:* vendredi 3 juin 2011 08:03
*To:* Cristobal Priego
*Cc:* CCIE VOICE
*Subject:* Re: [OSL | CCIE_Voice] DHCP Debug in CUCM
Utils network capture
Kobelski findko...@gmail.com
Sent: Fri, Jun 03, 2011 11:51:03 Am
To: Friderich Claude cfrider...@netcore.lu
CC: CCIE VOICE ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] DHCP Debug in CUCM
Much better solution, thanks! :)
On Fri
Sent: Fri, Jun 03, 2011 11:51:03 Am
To: Friderich Claude cfrider...@netcore.lu cfrider...@netcore.lu
CC: CCIE VOICE
ccie_voice@onlinestudylist.comccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] DHCP Debug in CUCM
Much better solution, thanks! :)
On Fri, Jun 3, 2011 at 11:52
Hi Guys
I have a very basic question about DHCP. most of the time this works with out
any issue.
Is there anyway that we can DHCP debug in CUCM ?? Can we get the mac biind with
the IP form CUCM ?
Best RegardsJ anzar
John,
No debugs in CUCM for DHCP but you still have the Cisco DHCP Monitor Service
Traces and packet capture.
There is no way to bind the MAC of a device to an IP address as far as I can
tell; there is no option in GUI to accomplish this.
Regards,
Roger Carpio.
On Thu, Jun 2, 2011 at 8:45 AM,
how do you do the packet capture from the cucm cli ?
2011/6/2 Miron Kobelski findko...@gmail.com
Hi,
I was unable to find anything better then packet capture on CUCM CLI - it
allows you to see if the DHCP messages hit the CUCM and are sent back, but
not much more ;)
best regards
On
