[mailto:justin.s.car...@gmail.com]
*Sent:* 05 October 2013 20:31
*To:* Anthony Nwachukwu
*Cc:* Anthony Nwachukwu; ccie_voice@onlinestudylist.com, (
ccie_voice@onlinestudylist.com)
*Subject:* RE: [OSL | CCIE_Voice] TEI_ASSIGNED
** **
You will not be able to bring up the pri until your mgcp
I need help to reslove the problem with TEI_ASSIGNED on the T1 Link ISDN Serial0/0/0:23 interface dsl 0, interface ISDN Switchtype = primary-ni L2 Protocol = Q.921 0x L3 Protocol(s) = CCM MANAGER 0x0003 Layer 1 Status: ACTIVE Layer 2 Status: TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
CorpHQ#CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 Q921: S4_SABME: BACKHAULED vsc_wants_L2_up = FALSEISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 Q921: S4_SABME: BACKHAULED vsc_wants_L2_up = FALSECorpHQ#CorpHQ#ISDN Se0/0/0:23 Q921: User RX -
Did you try the steps I outlined earlier?
Does show ccm indicate your mgcp gw is regisyered to cucm? If not check
your hostname and domain name (if set) on gw and double check the cucm
config.
If so it is registered you could take it a step further and remove the
pri-group from the controller
@onlinestudylist.com)
*Subject:* Re: [OSL | CCIE_Voice] TEI_ASSIGNED
** **
Did you try the steps I outlined earlier?
Does show ccm indicate your mgcp gw is regisyered to cucm? If not check
your hostname and domain name (if set) on gw and double check the cucm
config.
If so
Hi,I need help I am setting up MGCP on a 2811 router I am getting TE1-ASSIGNED.CorpHQ#debug isdn q921debug isdn q921 is ON.CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt
Hi,I need help I am setting up MGCP on a 2811 router I am getting TE1-ASSIGNED.CorpHQ#debug isdn q921debug isdn q921 is ON.CorpHQ#ISDN Se0/0/0:23 Q921: User RX - SABMEp sapi=0 tei=0ISDN Se0/0/0:23 **ERROR**: L2IF_SendPkt: idb is NULLISDN Se0/0/0:23 **ERROR**: process_rxdata:L2IF_SendPkt
Thanks
Original Message
Subject: Re: [OSL | CCIE_Voice] TEI_ASSIGNED
From: Justin Carney justin.s.car...@gmail.com
Date: Tue, October 01, 2013 5:37 pm
To: Anthony Nwachukwu anwachu...@apafrica.com
Cc: "ccie_voice@onlinestudylist.com (ccie_voice@onlinestudylist.com)"
I'll start by assuming your config is correct. Then, the first thing I try
is as follows:
no mgcp
mgcp bind media source lo0 or whatever interface you are using
mgcp bind control source lo0
mgcp bind media source lo0
mgcp bind control source lo0
mgcp
This *usually* clears it up, assuming