Kevin - I've never seen or experienced either of these issues.
On your last point, I've just tested on CM6.1.2 and it does auto update
the partition in the line group. Maybe it's a bug in the version you're
running?
Kind regards
Neil O'Brien
From:
Brother even before the very first attempt of the Lab, SIP Trunk, AAR and
CAC must be a piece of cake or else it wouldn't be a surprise even if you had
to appear for a 99th attempt.
Bro, there is no shortcut for practice and patience, and then soon success
will marry you :)
From:
Hi ShinGei,
I see you have already changed the CUCM Service Parameter Inbound
Calling Search Space for Remote Destination from its default to RDP +
Line CSS, which is good.
Have you tried restarting the mobility services (and the CUCM service as
a last resort)?
cheers, sd
From:
As I go through the vol 2 labs, I find myself getting wrapped around the
axle with device (phone) css'es in UCM. I'm trying to make a least number
of repeat touches to the same item and with some of the requirements of the
labs (translations, etc.) I find myself sometimes struggling with COR.
Gregg,
I'm kind of in the same boat as you. To me it seems like it would be easier
to use the line/device approach. I was assigning internal css to the line
and all other to the device. That seems to have sped up my time in working
with CSSs, but I would also like to hear some other opinions.
Hi Gregg,
Here's my approach, which doesn't mean it's the best, but it works for me
the best.
I create PT-INTERNAL
and create the following CSS's:
CSS-INTERNALthis will be for incoming calls, gw.
CSS-HQ-FULL
CSS-HQ-LD
CSS-BR1-FULL
CSS-BR1-LD
CSS-BR2-FULL
CSS-BR2-LD
All these initially will
Hi,
My solution is to configure each phone with dedicated css in the beginning,
e.g.:
css hqp1 international
css hqp2 ld
css br1p1 local
css br1p2 ld
Later, I assign partitions to these css as needed.
regards
kobel
On Wed, Mar 23, 2011 at 17:27, Gregg Malcolm gregg.malc...@gmail.comwrote:
As
I had the same problem last time, and I wasn't able to resolve this without
having an internal partition in the CSS that I applied on RDP.
but then obviously it breaks task 3.1 requierement to show the number:
+447976852817
If you find out what the problem is, let us know mate,
On Mon, Mar 21,
As a practice even if I don't use them I go ahead and make the following
partitions and css, one for each site:
hqlcl pt
Hqoffice pt
Hqld pt
Hqinternational pt
Pstn pt
Hq css
Add all the above partitions.
This does not take very long. as you build your phones for hq just throw the
css on
Mates,
I believe quite a number of us hitting this funny issue(if you search thru
entire list since early last year)
No sure it was caused of softbug or the question itself,unable to get
further explanation or solution after all posts.
Maybe as Steve suggested, just give it (mobility/ucm
I've tried CCM Service restart... didn't work...
On Wed, Mar 23, 2011 at 6:01 PM, ShinGei Yong shingei.y...@gmail.comwrote:
Mates,
I believe quite a number of us hitting this funny issue(if you search thru
entire list since early last year)
No sure it was caused of softbug or the question
Hi Wael,
This is what I got from some notes on how I usually do it:
1.
Define router as DNS Server
ip dns server
1.
Define the server HQ-RTR.hq.local as primary server for the DNS zones
hq.local and uk.local, and admin contact as
admin@hq.localadmin@ccie.local.
Can add
The images should be provided on the lab. Still if you want to do them on
your own for your practice or fun, you can use this doc as reference:
https://supportforums.cisco.com/docs/DOC-11493
On Tue, Mar 22, 2011 at 10:25 AM, Wael Agina waelag...@gmail.com wrote:
Thanks :)
On Tue, Mar 22,
I'm using external calling number mask with full e164 number. When I call
from an extension out a MGCP gateway, the call goes as expected with the +.
If I dial out of an H323 gateway, the external number shows with no plus.
Anybody ran into this before? I can add the plus with a
Well, I might have found my answer:
http://www.voiceie.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=8;t=002862
Poster says that h323 gateways can't process the plus. Can anyone confirm?
Adam Compton
On Wed, Mar 23, 2011 at 8:15 PM, adam compton com...@gmail.com wrote:
I'm using external
Adam,
This is correct. If you have a requirement to send the + you'll have to add
at voice-port using a translation-rule.
Jeff
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of adam compton
Sent: Wednesday, March 23, 2011 5:19
The + gets stripped by the voip dial-peer. You will always have to add the +
back when sending to a H323 or SIP gateway.
-Adam
On Wed, Mar 23, 2011 at 8:19 PM, adam compton com...@gmail.com wrote:
Well, I might have found my answer:
Yes ,,,h323 cant process the +you need use translations to add the + on
inbound calls
Marcelo Alexandria
#27021
De: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] Em nome de adam compton
Enviada em: quarta-feira, 23 de março de 2011 21:19
18 matches
Mail list logo
