Re: [OSL | CCIE_Voice] vouchers to let go
Hi, We can buy directly from IPExpert at around $20. Please don't use this forum for such things. Thanks, Wyan On Sun, Aug 21, 2011 at 7:35 AM, T K Lim lim.t...@gmail.com wrote: Lots of vouchers to let go, selling at $22 each, only accept payment via paypal. Contact me direct at lim.t...@gmail.com to deal. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Unable to access Proctorlabs.com
yep - its down From: nishi...@hotmail.com To: ccie_voice@onlinestudylist.com; supp...@ipexpert.com Date: Sun, 21 Aug 2011 04:24:30 + Subject: [OSL | CCIE_Voice] Unable to access Proctorlabs.com Hi, I am unable to access or open proctorlabs.com site. getting below error. Server ErrorThe server encountered an internal error and was unable to complete your request.JRun closed connection. Regards, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Route Plan questions
Hi Experts This is not exactly a specific question but rather hoping you can share your experience. I am going through the topic of route plan. From various lab exercises, I can see that there are quite a few different approach or way to achieve the route plan requirements. Then I have to ask, how do you analyse the route plan requirement or how do you decide which way to achieve the requirements? For example, I can see some people use transformation CSS at device pool or some use them at the gateway. Or in terms of translation pattern, some will use one partiton for all sites, or one per each site. I suppose the end result is to make sure it works according to the requirement, I just want to see how everyone tackle this, especially when you only have less than 8 hours to do this. Cheers ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Unable to access Proctorlabs.com
Hi Ron, Same here, booked 2 sessions. Regards, Nish CC: ccie_voice@onlinestudylist.com; supp...@ipexpert.com From: ron...@solcon.nl Subject: Re: [OSL | CCIE_Voice] Unable to access Proctorlabs.com Date: Sun, 21 Aug 2011 09:11:06 +0200 To: nishi...@hotmail.com Also down hereProctorlabs down!!!Also website downI have two sessions today and one is already halfway Send from my mobile Op 21 aug. 2011 om 06:24 heeft Nish Tarpara nishi...@hotmail.com het volgende geschreven: Hi, I am unable to access or open proctorlabs.com site. getting below error. Server ErrorThe server encountered an internal error and was unable to complete your request.JRun closed connection. Regards, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Disabling Conference on SCCP CME Phones.
Hello jorge , the only difference between these 2 ways in that when you used the feature block , you will see the CONF softkey but when its grad out and when you click on it , you will see the key is not active here , however using the soft key in the ephone template will not show you the CONF soft key at all , so if no special requirement mentioned in the exam , i will go with option 2 Ash On Sat, Aug 20, 2011 at 10:19 PM, Jorge Brenes study2c...@gmail.com wrote: Hello All, When asked to remove the Conference softkey from a CME SCCP phone, I can do this in two different ways as illustrated below. I would like to know the correct way of doing this if asked in the Lab exam. Wondering if they would be looking for the features blocked or softkey keyword. BR2-RTR(config)#ephone-template 1 BR2-RTR(config-ephone-template)#features blocked Confrn BR2-RTR(config-ephone-template)#ephone 1 BR2-RTR(config-ephone)#ephone-template 1 BR2-RTR(config-ephone)#reset BR2-RTR(config)#ephone-template 1 BR2-RTR(config-ephone-template)#softkeys connected hold endcall trnsfer acct flash park BR2-RTR(config-ephone-template)#ephone 1 BR2-RTR(config-ephone)#ephone-template 1 BR2-RTR(config-ephone)#reset Thank you. -Jorge ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] vouchers to let go
Wyan Did the price drop? When I got mine it was like $30 and $45 if you went direct thru proctorlabs or something. -Original Message- From: Ken Wyan Sent: Sunday, August 21, 2011 2:29 AM To: T K Lim Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] vouchers to let go Hi, We can buy directly from IPExpert at around $20. Please don't use this forum for such things. Thanks, Wyan On Sun, Aug 21, 2011 at 7:35 AM, T K Lim lim.t...@gmail.com wrote: Lots of vouchers to let go, selling at $22 each, only accept payment via paypal. Contact me direct at lim.t...@gmail.com to deal. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] vouchers to let go
If you go through proctorlabs price is that. But if you buy through ipexpert price is around $20 (different selling agents have different prices for the same ; this is as usual) Wyan On Sun, Aug 21, 2011 at 3:22 PM, Jon H jon1...@hotmail.com wrote: Wyan Did the price drop? When I got mine it was like $30 and $45 if you went direct thru proctorlabs or something. -Original Message- From: Ken Wyan Sent: Sunday, August 21, 2011 2:29 AM To: T K Lim Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] vouchers to let go Hi, We can buy directly from IPExpert at around $20. Please don't use this forum for such things. Thanks, Wyan On Sun, Aug 21, 2011 at 7:35 AM, T K Lim lim.t...@gmail.com wrote: Lots of vouchers to let go, selling at $22 each, only accept payment via paypal. Contact me direct at lim.t...@gmail.com to deal. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] vouchers to let go
Hi Jon Look at this link http://www.imakenews.com/ipexpert/e_article002169716.cfm?x=bjL6jD3,bk51Gqp5,w For a limited time only, any CCIE candidate that purchases a workbook will receive 10 FREE ($225 value) virtual rack timeslots Virtual rack timeslot price is $22.50 ; but we will get 10 free with a workbook. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Unable to access Proctorlabs.com
I can't access it from my iPhone either Sent from my iPhone On Aug 20, 2011, at 9:24 PM, Nish Tarpara nishi...@hotmail.com wrote: Hi, I am unable to access or open proctorlabs.com site. getting below error. Server Error The server encountered an internal error and was unable to complete your request.JRun closed connection. Regards, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] - Call from Remote destination (SNR) not showing calling name
I have same issue and not solved, any ideas ? On Sun, Aug 21, 2011 at 2:25 AM, Alejandra G Romero alexg...@gmail.comwrote: Hello I have a problem with the MVA, SNR. I make a call from the Remote destination to the MVA script, the number is recognized and I only enter my PIN number. I press 1 to make a call to an internal phone. The problem is that when the internal phone is receiving the call the calling name is not displayed. I can only see the caller name that is the extension. I have added the Display name on the Remote Destination Profile, I also have the display name on the line but still can't see the calling name Have you ever seen the same problem and do you know how it can be fixed? Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Thanks and Best Regards, Wael Agina ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Unable to access Proctorlabs.com
Did you open a support ticket Rc Sent from my iPhone On Aug 20, 2011, at 9:24 PM, Nish Tarpara nishi...@hotmail.com wrote: Hi, I am unable to access or open proctorlabs.com site. getting below error. Server Error The server encountered an internal error and was unable to complete your request.JRun closed connection. Regards, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED]
I cannot complete calls from BR2 CME to BR1 or HQ using gatekeeper on HQ-RTR. I've verified the Gateway in CUCM and the Gatekeeper in CUCM and the Trunk and still calls will not complete from CME to either BR1 or HQ Phones. I've double checked everything. I've reset the gateway, trunk and CUCM service on Sub and Pub. When I dial from CME 3001 to BR1 or HQ - I get the message your call cannot be completed as dialed. Any assistance or suggestions would be appreciated. I match the tech prefix and the zone prefix but still nothing happens. I must be missing something. Gatekeeper is giving me brain damage! GATEKEEPER CONFIGURATION gatekeeper; zone local PL ipexpert.com; zone prefix PL 1... gw-priority 10 gk-trunk_2; zone prefix PL 1... gw-priority 9 gk-trunk_1; zone prefix PL 1... gw-priority 0 BR2-RTR; zone prefix PL 5... gw-priority 10 gk-trunk_2; zone prefix PL 5... gw-priority 9 gk-trunk_1; zone prefix PL 5... gw-priority 0 BR2-RTR; gw-type-prefix 1#*; no shutdown; !; BR2 BR2-RTR#show gateway H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1 H.323 service is up Gateway BR2-RTR is registered to Gatekeeper PL Alias list (CLI configured) E164-ID 3001 H323-ID BR2-RTR Alias list (last RCF) E164-ID 3001 H323-ID BR2-RTR H323 resource thresholding is Disabled ! _ BR2 Dialpeer dial-peer voice 15 voip destination-pattern [15]... voice-class codec 1 session target ras tech-prefix 1# no vad ! __ HQ-RTR#show gatek gw GATEWAY TYPE PREFIX TABLE = Prefix: 1#* Zone PL master gateway list: 10.10.210.10:1720 gk-trunk_1 10.10.210.11:1720 gk-trunk_2 Zone PL prefix 5... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Zone PL prefix 1... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Prefix: 3* Zone PL master gateway list: 10.10.110.3:1820 BR2-RTR Zone PL prefix 5... priority gateway list(s): Zone PL prefix 1... priority gateway list(s): ___ HQ-RTR#show gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.10.110.3 1820 10.10.110.3 61503 PLH323-GW E164-ID: 3001 H323-ID: BR2-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.210.101720 10.10.210.1032816 PLVOIP-GW H323-ID: gk-trunk_1 Voice Capacity Max.= Avail.= Current.= 0 10.10.210.111720 10.10.210.1133215 PLVOIP-GW H323-ID: gk-trunk_2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 3 ON BR2-RTR-DEBUG VOIP DIALPEER; 02:08:41: //-1//DPM/dpMatchPeers:; Result=SUCCESS(0) ; List of Matched Outgoing Dial-peer(s):; 1: Dial-peer Tag=15; __ ON HQ-RTR-DEBUG GATEK MAIN 10; ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC; //701F5FE8804E/701F5FE88050/GK/gk_dns_query: No Name servers; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched tech-prefix 1#; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched zone prefix 1 and remainder 002; ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: matched zone is PL, and z_invianamelen=0; \//701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: matched zone is PL, and z_outvianamelen=0; ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1; ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup; ////GK/gk_rassrv_brq: state = 0xF; ////GK/gk_rassrv_brq: brqp=0x49F7CF84, crv=0xF, bandWidth=160gk)#; __ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] SIP Dial Rules and +Dialing
Do SIP Rules support +Dialing? For example if I have the following SIP Dial Rule: Pattern - \+1212... Timeout - 0 On a SIP phone missed calls shows +12123945001. If I try to dial this number I have to wait for the interdigit timeout. It seems to ignore the \+1212... pattern I created. All my other non +Dial patterns work just fine (i.e. 5...). Is this normal or have I got something mis-configured? John ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED]
Hi Mike, Have you stripped off the tech prefix on CUCM? If not, add a Translation Pattern in the none partition: 1#.[23]XXX with a DDI of Pre-dot (assuming your extensions at HQ and BR1 are 2XXX and 3XXX respectively - modify as set up in your lab). On Sun, Aug 21, 2011 at 11:59 PM, ccie_voice-requ...@onlinestudylist.comwrote: Send CCIE_Voice mailing list submissions to ccie_voice@onlinestudylist.com To subscribe or unsubscribe via the World Wide Web, visit http://onlinestudylist.com/mailman/listinfo/ccie_voice or, via email, send a message with subject or body 'help' to ccie_voice-requ...@onlinestudylist.com You can reach the person managing the list at ccie_voice-ow...@onlinestudylist.com When replying, please edit your Subject line so it is more specific than Re: Contents of CCIE_Voice digest... Today's Topics: 1. Re: Unable to access Proctorlabs.com (Rrcrumm) 2. Re: Unable to access Proctorlabs.com (Marko Milivojevic) 3. [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED] (michael.se...@compucom.com) -- Message: 1 Date: Sun, 21 Aug 2011 09:41:00 -0700 From: Rrcrumm rrcr...@yahoo.com To: Nish Tarpara nishi...@hotmail.com Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com, supp...@ipexpert.com supp...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] Unable to access Proctorlabs.com Message-ID: fc56a4bc-a260-4bb7-b244-14b74965c...@yahoo.com Content-Type: text/plain; charset=us-ascii Did you open a support ticket Rc Sent from my iPhone On Aug 20, 2011, at 9:24 PM, Nish Tarpara nishi...@hotmail.com wrote: Hi, I am unable to access or open proctorlabs.com site. getting below error. Server Error The server encountered an internal error and was unable to complete your request.JRun closed connection. Regards, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: /archives/ccie_voice/attachments/20110821/f9ca4717/attachment-0001.html -- Message: 2 Date: Sun, 21 Aug 2011 10:11:46 -0700 From: Marko Milivojevic mar...@ipexpert.com To: Nish Tarpara nishi...@hotmail.com Cc: ccie_voice@onlinestudylist.com, supp...@ipexpert.com Subject: Re: [OSL | CCIE_Voice] Unable to access Proctorlabs.com Message-ID: CAGDYm0xp5VUqwBWKOmH=zw7bt1d_bogrvq1cgmgwy3iwyty...@mail.gmail.com Content-Type: text/plain; charset=UTF-8 Hi, there was a downtime this morning. Whenever this happens, please get in touch with support at supp...@ipexpert.com and supp...@proctorlabs.com. That way, our support guys can work on the problem immediately, unless they're working on it already. Is everything OK now? -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert FREE CCIE training: http://bit.ly/vLecture Mailto: mar...@ipexpert.com Telephone: +1.810.326.1444 Web: http://www.ipexpert.com/ On Sat, Aug 20, 2011 at 21:24, Nish Tarpara nishi...@hotmail.com wrote: Hi, I am unable to access or open proctorlabs.com site. getting below error. Server Error The server encountered an internal error and was unable to complete your request.JRun closed connection. Regards, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Message: 3 Date: Sun, 21 Aug 2011 14:29:29 -0400 From: michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED] Message-ID: 426D14439C8C604B90E332DD4696917301AD2D2BD9@SP049EXC32.compucom.local Content-Type: text/plain; charset=us-ascii I cannot complete calls from BR2 CME to BR1 or HQ using gatekeeper on HQ-RTR. I've verified the Gateway in CUCM and the Gatekeeper in CUCM and the Trunk and still calls will not complete from CME to either BR1 or HQ Phones. I've double checked everything. I've reset the gateway, trunk and CUCM service on Sub and Pub. When I dial from CME 3001 to BR1 or HQ - I get the message your call cannot be completed as dialed. Any assistance or suggestions would be appreciated. I match the tech prefix and the zone prefix but still nothing happens. I must be missing something. Gatekeeper is giving me brain damage! GATEKEEPER CONFIGURATION gatekeeper; zone local PL ipexpert.com; zone prefix PL 1... gw
Re: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED]
Hi Michael - is your gkp trunk set to 4 digits in cucm? b On Sun, Aug 21, 2011 at 7:29 PM, michael.se...@compucom.com wrote: I cannot complete calls from BR2 CME to BR1 or HQ using gatekeeper on HQ-RTR. I’ve verified the Gateway in CUCM and the Gatekeeper in CUCM and the Trunk and still calls will not complete from CME to either BR1 or HQ Phones. I’ve double checked everything. I’ve reset the gateway, trunk and CUCM service on Sub and Pub. When I dial from CME 3001 to BR1 or HQ – I get the message your call cannot be completed as dialed. Any assistance or suggestions would be appreciated. I match the tech prefix and the zone prefix but still nothing happens. I must be missing something. Gatekeeper is giving me brain damage! ** ** GATEKEEPER CONFIGURATION gatekeeper; zone local PL ipexpert.com; zone prefix PL 1... gw-priority 10 gk-trunk_2; zone prefix PL 1... gw-priority 9 gk-trunk_1; zone prefix PL 1... gw-priority 0 BR2-RTR; zone prefix PL 5... gw-priority 10 gk-trunk_2; zone prefix PL 5... gw-priority 9 gk-trunk_1; zone prefix PL 5... gw-priority 0 BR2-RTR; gw-type-prefix 1#*; no shutdown; !; BR2 BR2-RTR#show gateway H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1 ** ** H.323 service is up Gateway BR2-RTR is registered to Gatekeeper PL ** ** Alias list (CLI configured) E164-ID 3001 H323-ID BR2-RTR Alias list (last RCF) E164-ID 3001 H323-ID BR2-RTR ** ** H323 resource thresholding is Disabled ! _ BR2 Dialpeer dial-peer voice 15 voip destination-pattern [15]... voice-class codec 1 session target ras tech-prefix 1# no vad ! ** ** __ HQ-RTR#show gatek gw GATEWAY TYPE PREFIX TABLE = Prefix: 1#* Zone PL master gateway list: 10.10.210.10:1720 gk-trunk_1 10.10.210.11:1720 gk-trunk_2 Zone PL prefix 5... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Zone PL prefix 1... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 ** ** Prefix: 3* Zone PL master gateway list: 10.10.110.3:1820 BR2-RTR Zone PL prefix 5... priority gateway list(s): Zone PL prefix 1... priority gateway list(s): ___ HQ-RTR#show gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.10.110.3 1820 10.10.110.3 61503 PLH323-GW E164-ID: 3001 H323-ID: BR2-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.210.101720 10.10.210.1032816 PLVOIP-GW H323-ID: gk-trunk_1 Voice Capacity Max.= Avail.= Current.= 0 10.10.210.111720 10.10.210.1133215 PLVOIP-GW H323-ID: gk-trunk_2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 3 ON BR2-RTR-DEBUG VOIP DIALPEER; 02:08:41: //-1//DPM/dpMatchPeers:; Result=SUCCESS(0) ; List of Matched Outgoing Dial-peer(s):; 1: Dial-peer Tag=15; __ ON HQ-RTR-DEBUG GATEK MAIN 10; ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC; //701F5FE8804E/701F5FE88050/GK/gk_dns_query: No Name servers; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched tech-prefix 1#; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched zone prefix 1 and remainder 002; ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: matched zone is PL, and z_invianamelen=0; \//701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone:
Re: [OSL | CCIE_Voice] Unable to access Proctorlabs.com
I had booked session from 12 midnight Eastern Time when the outage was in full swing. From the past experience, when i send email to supp...@proctorlabs.com in mid-night session, i do not get response until next working day. However, i do get very quick response when i log fault through After Hours support link on the webpage. I think, Richard wrote me that when the issue is logged through After Hours support link, a page goes out to the support enginer. This make sense why i do not get response when i log fault through 'supp...@proctorlabs.com' in mid-night session but do get response when i log fault throgh After Hours support link. Since, last night's situation was catch 22 situation, that is it was happening in midnight session and also can't access 'After Hours Link', even an email to supp...@proctorlabs.com would not have been attended to. That's my 2c comment on last night situation. -adil On Mon, Aug 22, 2011 at 3:11 AM, Marko Milivojevic mar...@ipexpert.comwrote: Hi, there was a downtime this morning. Whenever this happens, please get in touch with support at supp...@ipexpert.com and supp...@proctorlabs.com. That way, our support guys can work on the problem immediately, unless they're working on it already. Is everything OK now? -- Marko Milivojevic - CCIE #18427 Senior Technical Instructor - IPexpert FREE CCIE training: http://bit.ly/vLecture Mailto: mar...@ipexpert.com Telephone: +1.810.326.1444 Web: http://www.ipexpert.com/ On Sat, Aug 20, 2011 at 21:24, Nish Tarpara nishi...@hotmail.com wrote: Hi, I am unable to access or open proctorlabs.com site. getting below error. Server Error The server encountered an internal error and was unable to complete your request.JRun closed connection. Regards, Nish ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] - Call from Remote destination (SNR) not showing calling name
Hi Alejandra, Actually it is working with me. You only see the calling name when answer the call, not in rining state. Try to call from PSTN to MVA #, Authenticate and then call internally, you should see only calling Number ANI , when answer you see the calling name as per your name on the rdp line. Regards, Wael Agina On Sun, Aug 21, 2011 at 6:32 PM, Wael Agina waelag...@gmail.com wrote: I have same issue and not solved, any ideas ? On Sun, Aug 21, 2011 at 2:25 AM, Alejandra G Romero alexg...@gmail.comwrote: Hello I have a problem with the MVA, SNR. I make a call from the Remote destination to the MVA script, the number is recognized and I only enter my PIN number. I press 1 to make a call to an internal phone. The problem is that when the internal phone is receiving the call the calling name is not displayed. I can only see the caller name that is the extension. I have added the Display name on the Remote Destination Profile, I also have the display name on the line but still can't see the calling name Have you ever seen the same problem and do you know how it can be fixed? Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Thanks and Best Regards, Wael Agina -- Thanks and Best Regards, Wael Agina ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] - Call from Remote destination (SNR) not showing calling name
Working as designed folks,, dont worry It shows calling name once connected,, there is a defect filed on the same as well -Shikhar On Sun, Aug 21, 2011 at 8:32 AM, Wael Agina waelag...@gmail.com wrote: I have same issue and not solved, any ideas ? On Sun, Aug 21, 2011 at 2:25 AM, Alejandra G Romero alexg...@gmail.comwrote: Hello I have a problem with the MVA, SNR. I make a call from the Remote destination to the MVA script, the number is recognized and I only enter my PIN number. I press 1 to make a call to an internal phone. The problem is that when the internal phone is receiving the call the calling name is not displayed. I can only see the caller name that is the extension. I have added the Display name on the Remote Destination Profile, I also have the display name on the line but still can't see the calling name Have you ever seen the same problem and do you know how it can be fixed? Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Thanks and Best Regards, Wael Agina ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] - Call from Remote destination (SNR) not showing calling name
Yes, You wont see calling name till call is answered and connected. On Sun, Aug 21, 2011 at 11:45 PM, Alejandra G Romero alexg...@gmail.comwrote: Hey Wael That is exactly what is doing. I call the MVA number, use my pin and press 1 to make a call. I dial an internal DN. While the call is ringing I can only see the calling number, not the name. It is until the call is answered that I see both the calling name and number. So it is working fine? You are not able to see the calling name until the call is answered? Regards On Sun, Aug 21, 2011 at 3:20 PM, Wael Agina waelag...@gmail.com wrote: Hi Alejandra, Actually it is working with me. You only see the calling name when answer the call, not in rining state. Try to call from PSTN to MVA #, Authenticate and then call internally, you should see only calling Number ANI , when answer you see the calling name as per your name on the rdp line. Regards, Wael Agina On Sun, Aug 21, 2011 at 6:32 PM, Wael Agina waelag...@gmail.com wrote: I have same issue and not solved, any ideas ? On Sun, Aug 21, 2011 at 2:25 AM, Alejandra G Romero alexg...@gmail.comwrote: Hello I have a problem with the MVA, SNR. I make a call from the Remote destination to the MVA script, the number is recognized and I only enter my PIN number. I press 1 to make a call to an internal phone. The problem is that when the internal phone is receiving the call the calling name is not displayed. I can only see the caller name that is the extension. I have added the Display name on the Remote Destination Profile, I also have the display name on the line but still can't see the calling name Have you ever seen the same problem and do you know how it can be fixed? Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Thanks and Best Regards, Wael Agina -- Thanks and Best Regards, Wael Agina -- Thanks and Best Regards, Wael Agina ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED]
Hi Mike, A few suggestions. CUCM Trunk have a CSS assigned to it that can see the partition that the phones are in? Add dtmf-relay h245-alphanumeric h245-signal to your dial-peer 15. Since the destination phone isn't ringing, turn up 'debug ras' on BR2 and the gatekeeper. Check that for any errors. Hope that helps, Jeff - Original Message - From: michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Sent: Sunday, August 21, 2011 11:29 AM Subject: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED] I cannot complete calls from BR2 CME to BR1 or HQ using gatekeeper on HQ-RTR. I've verified the Gateway in CUCM and the Gatekeeper in CUCM and the Trunk and still calls will not complete from CME to either BR1 or HQ Phones. I've double checked everything. I've reset the gateway, trunk and CUCM service on Sub and Pub. When I dial from CME 3001 to BR1 or HQ - I get the message your call cannot be completed as dialed. Any assistance or suggestions would be appreciated. I match the tech prefix and the zone prefix but still nothing happens. I must be missing something. Gatekeeper is giving me brain damage! GATEKEEPER CONFIGURATION gatekeeper; zone local PL ipexpert.com; zone prefix PL 1... gw-priority 10 gk-trunk_2; zone prefix PL 1... gw-priority 9 gk-trunk_1; zone prefix PL 1... gw-priority 0 BR2-RTR; zone prefix PL 5... gw-priority 10 gk-trunk_2; zone prefix PL 5... gw-priority 9 gk-trunk_1; zone prefix PL 5... gw-priority 0 BR2-RTR; gw-type-prefix 1#*; no shutdown; !; BR2 BR2-RTR#show gateway H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1 H.323 service is up Gateway BR2-RTR is registered to Gatekeeper PL Alias list (CLI configured) E164-ID 3001 H323-ID BR2-RTR Alias list (last RCF) E164-ID 3001 H323-ID BR2-RTR H323 resource thresholding is Disabled ! _ BR2 Dialpeer dial-peer voice 15 voip destination-pattern [15]... voice-class codec 1 session target ras tech-prefix 1# no vad ! __ HQ-RTR#show gatek gw GATEWAY TYPE PREFIX TABLE = Prefix: 1#* Zone PL master gateway list: 10.10.210.10:1720 gk-trunk_1 10.10.210.11:1720 gk-trunk_2 Zone PL prefix 5... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Zone PL prefix 1... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Prefix: 3* Zone PL master gateway list: 10.10.110.3:1820 BR2-RTR Zone PL prefix 5... priority gateway list(s): Zone PL prefix 1... priority gateway list(s): ___ HQ-RTR#show gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.10.110.3 1820 10.10.110.3 61503 PLH323-GW E164-ID: 3001 H323-ID: BR2-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.210.101720 10.10.210.1032816 PLVOIP-GW H323-ID: gk-trunk_1 Voice Capacity Max.= Avail.= Current.= 0 10.10.210.111720 10.10.210.1133215 PLVOIP-GW H323-ID: gk-trunk_2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 3 ON BR2-RTR-DEBUG VOIP DIALPEER; 02:08:41: //-1//DPM/dpMatchPeers:; Result=SUCCESS(0) ; List of Matched Outgoing Dial-peer(s):; 1: Dial-peer Tag=15; __ ON HQ-RTR-DEBUG GATEK MAIN 10; ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC; //701F5FE8804E/701F5FE88050/GK/gk_dns_query: No Name servers; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched tech-prefix 1#; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched zone prefix 1 and remainder 002; ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: matched zone is PL, and z_invianamelen=0;
Re: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED]
I guess it's codec and region mismatch between CM trunk and CME dialpeer. Regards. Khaled From: michael.se...@compucom.com To: ccie_voice@onlinestudylist.com Date: Sun, 21 Aug 2011 14:29:29 -0400 Subject: [OSL | CCIE_Voice] [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED] I cannot complete calls from BR2 CME to BR1 or HQ using gatekeeper on HQ-RTR. I’ve verified the Gateway in CUCM and the Gatekeeper in CUCM and the Trunk and still calls will not complete from CME to either BR1 or HQ Phones. I’ve double checked everything. I’ve reset the gateway, trunk and CUCM service on Sub and Pub. When I dial from CME 3001 to BR1 or HQ – I get the message your call cannot be completed as dialed. Any assistance or suggestions would be appreciated. I match the tech prefix and the zone prefix but still nothing happens. I must be missing something. Gatekeeper is giving me brain damage! GATEKEEPER CONFIGURATION gatekeeper; zone local PL ipexpert.com; zone prefix PL 1... gw-priority 10 gk-trunk_2; zone prefix PL 1... gw-priority 9 gk-trunk_1; zone prefix PL 1... gw-priority 0 BR2-RTR; zone prefix PL 5... gw-priority 10 gk-trunk_2; zone prefix PL 5... gw-priority 9 gk-trunk_1; zone prefix PL 5... gw-priority 0 BR2-RTR; gw-type-prefix 1#*; no shutdown; !; BR2 BR2-RTR#show gateway H.323 ITU-T Version: 4.0 H323 Stack Version: 0.1 H.323 service is up Gateway BR2-RTR is registered to Gatekeeper PL Alias list (CLI configured) E164-ID 3001 H323-ID BR2-RTR Alias list (last RCF) E164-ID 3001 H323-ID BR2-RTR H323 resource thresholding is Disabled ! _ BR2 Dialpeer dial-peer voice 15 voip destination-pattern [15]... voice-class codec 1 session target ras tech-prefix 1# no vad ! __ HQ-RTR#show gatek gw GATEWAY TYPE PREFIX TABLE = Prefix: 1#* Zone PL master gateway list: 10.10.210.10:1720 gk-trunk_1 10.10.210.11:1720 gk-trunk_2 Zone PL prefix 5... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Zone PL prefix 1... priority gateway list(s): Priority 10: 10.10.210.11:1720 gk-trunk_2 Priority 9: 10.10.210.10:1720 gk-trunk_1 Prefix: 3* Zone PL master gateway list: 10.10.110.3:1820 BR2-RTR Zone PL prefix 5... priority gateway list(s): Zone PL prefix 1... priority gateway list(s): ___ HQ-RTR#show gatek end GATEKEEPER ENDPOINT REGISTRATION CallSignalAddr Port RASSignalAddr Port Zone Name TypeFlags --- - --- - - - 10.10.110.3 1820 10.10.110.3 61503 PLH323-GW E164-ID: 3001 H323-ID: BR2-RTR Voice Capacity Max.= Avail.= Current.= 0 10.10.210.101720 10.10.210.1032816 PLVOIP-GW H323-ID: gk-trunk_1 Voice Capacity Max.= Avail.= Current.= 0 10.10.210.111720 10.10.210.1133215 PLVOIP-GW H323-ID: gk-trunk_2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 3 ON BR2-RTR-DEBUG VOIP DIALPEER; 02:08:41: //-1//DPM/dpMatchPeers:; Result=SUCCESS(0) ; List of Matched Outgoing Dial-peer(s):; 1: Dial-peer Tag=15; __ ON HQ-RTR-DEBUG GATEK MAIN 10; ////GK/gk_rassrv_sep_arq: ARQ Didn't use GK_AAA_PROC; //701F5FE8804E/701F5FE88050/GK/gk_dns_query: No Name servers; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched tech-prefix 1#; //701F5FE8804E/701F5FE88050/GK/rassrv_get_addrinfo: (1#1002) Matched zone prefix 1 and remainder 002; ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: matched zone is PL, and z_invianamelen=0; \//701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x49D60364; //701F5FE8804E/701F5FE88050/GK/rassrv_arq_select_viazone: matched zone is PL, and z_outvianamelen=0; ////GK/gk_rassrv_get_ingress_network: ARQ non-std ingress network = 1; ////GK/gk_process: QUEUE_EVENT (minor 0) wakeup; ////GK/gk_rassrv_brq: state = 0xF; ////GK/gk_rassrv_brq: brqp=0x49F7CF84, crv=0xF, bandWidth=160gk)#;
[OSL | CCIE_Voice] RESOLVED: [GATEKEEPER DIAL FROM BR23001 TO BR11002 GET YOU'RE CALL CANNOT BE COMPLETED AS DIALED]
I didn't have the gateway set to four digits. Thanks for all your suggesions. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] [Phoneview Question.]
I've got all my phones in phoneview working for BR1 (2-7960's), HQ (1-7962/2-7940) and one phone on BR2 (7940). My SIP phone on BR2 a 7960 gets discovered by phoneview without an IP address and I manually add it, but I get response timeout when trying to perform any functions. I can ping the IP address of the phone from my server that phoneview is loaded on. Would appreciate any suggestions I think I've tried just about everything to get it going. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] - Call from Remote destination (SNR) not showing calling name
For me, SNR works with Phone name display while ringing and connected. However, in case of MVA, while phone is ringing I get number only and once connected i get name and number. In both case, i fill out External number mask and Name for Remote Destination Device. -adil On Mon, Aug 22, 2011 at 6:38 AM, |\___sHiKHar___/| shikhar...@gmail.comwrote: Working as designed folks,, dont worry It shows calling name once connected,, there is a defect filed on the same as well -Shikhar On Sun, Aug 21, 2011 at 8:32 AM, Wael Agina waelag...@gmail.com wrote: I have same issue and not solved, any ideas ? On Sun, Aug 21, 2011 at 2:25 AM, Alejandra G Romero alexg...@gmail.comwrote: Hello I have a problem with the MVA, SNR. I make a call from the Remote destination to the MVA script, the number is recognized and I only enter my PIN number. I press 1 to make a call to an internal phone. The problem is that when the internal phone is receiving the call the calling name is not displayed. I can only see the caller name that is the extension. I have added the Display name on the Remote Destination Profile, I also have the display name on the line but still can't see the calling name Have you ever seen the same problem and do you know how it can be fixed? Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Thanks and Best Regards, Wael Agina ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- .. . . _7___|___|_|_|adil.sha...@gmail.com . . ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] SIP Dial Rules and +Dialing
John, I can't find the plus sign as a valid character; what if you just use * as a wildcard? http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmcfg/b03sdial.html#wp1052731 Regards, Roger Carpio. On Sun, Aug 21, 2011 at 2:19 PM, John McGaughey (jomcgaug) jomcg...@cisco.com wrote: Do SIP Rules support +Dialing? For example if I have the following SIP Dial Rule: ** ** Pattern - \+1212……. Timeout – 0 ** ** On a SIP phone missed calls shows +12123945001. If I try to dial this number I have to wait for the interdigit timeout. It seems to ignore the \+1212……. pattern I created. ** ** All my other non +Dial patterns work just fine (i.e. 5…). ** ** Is this normal or have I got something mis-configured? ** ** John ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
