Re: [OSL | CCIE_Voice] CCIE VOICE Written dum ps
You failed because you didn't work enough. If you use dump you are screwing 2 things : 1- your career because it is easy to find it that you are a brain dumper 2- our efforts to keep the value of the certifications are huge because we work very hard and dumbass like you are just brain dumping Idiot Sent from my iPhone On 21 mai 2012, at 09:55, jacob franklin jac.frank1...@gmail.com wrote: Hello I failed my CCIE VOICE written please if anyone has latest dum ps please share the same 80% was new and it cost me. tk ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Vol2 Lab5 2.6
Not looking at the question, but this is typically for 911 / Emergency calls. It usually means to use a single 911 RP for both HQ / Site A and for site B as well. You achieve this by 1. having the 911 RP point to a Route List that has only the Standard Local Route Group and 2. Setting the local route groups correctly at the device pools. DQ d...@cisco.com Sent from my iPhone On May 20, 2012, at 7:25 PM, chase mergenthal cm3_...@hotmail.com wrote: In 2.6 is reads You are not permitted to create any new route patterns to achieve this task So, I'm assuming there should be some RP's that should already exist, but there are none, does anyone should what should be there? -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] unity connection 8
can anyone help!! or a link where i can see how to hack and get UC8 install on VM ESXi 4.1 I have a dell 1950 quadcorewith 16g Ram and 1T of HDD, I installed vm esxi 4.1.0 on it when i used the cucm business EDition iso install uc8 ,, it say that product not supported on current hardware: cisco unity connection cisco unified business edition 5000___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Vol 2 Lab 2 Question 9.3 SRST Call Forwarding
How about forward noan to a CTI Route Point on UCM. Have that CTI RP CFA to voicemail. You can have the CTI RP use a different voicemail profile and mask the mailbox to whatever you need. DQ d...@cisco.com Sent from my iPhone On May 19, 2012, at 1:07 PM, Jason Murray murr...@usa.com wrote: Hello everyone, I searched the forums and found a question that I have but there is no answer to it. Was wondering if anyone had any solution to this. I am going to post the original question since it is the same as I have. Thanks I have been working on Vol2 Lab 2 Question 9.3 SRST section (as below), but I could not find any solution for this. The IPX PG PDF file solution does not work, since it configured with an 'old fashion' alias in call-manager-fallback (as below), which redirects the incoming call to 1001 VM box, not the UC call-handler 5234 as supposed, which is configured as an announcement 'the number you call is not available' and then drop the call. Question - ensure that during SRST mode, incoming calls to ext 1001 will ring on ext 1002. If 1002 does not answer the call, the caller must hear an announcement 'this number is not available' and then drop the call. Solution provided in IPX PG PDF file: call-manager-fallback alias 1 1001 to 1003 cfw 5234 timeout 12 The VOL2 VOD is missing this section as well; and I did a search but not see any solution or suggestion on this OSL neither. I have tried a couple ways which configured ephone-dn call-forwarding or voice hunt-group and then finally sending caller to UC, but it always redirect to 1001 VM. Is this question is still a valid for Vol2 Lab2 SRST, and is anyone has been able to come up with a working solution for it? Thanks, TN. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MVA
Check the external phone number mask on the line on the RDP (not the phone itself.). I think you'll find that it's blank. When you alter a DN for a shared line, you need to propagate the changes. DQ d...@cisco.com Sent from my iPhone On May 21, 2012, at 2:08 AM, Juan Lopez lopez.hernandez.j...@gmail.com wrote: Hi Steven, not sure this was a reply to my question. If so, i was talking about the ANI, not the CNAM :) As for your answer, are you able to show the CNAM when calling à PSTN phone? Can you confirm, as to my knowledge this is not supported - i can only show if for internal calls once answered. Cheers, Juan On 20 May 2012, at 19:23, steven moran smoran...@gmail.com wrote: is the call name missing in the rining or answered state? answer the call on thePSTN side and see if the name is there, if not make sure you have gone to the primary extension number and propagated the call line values to the RDP extension, the user is assocaited with both lines and that the owner ID for the primary phones is the user. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE VOICE Written dum ps
I haven't been replying to many of these email threads, but I have to say that the below email is really just cyber-bullying and should stop now. No excuse. Regards Sent from my iPhone On May 21, 2012, at 5:14 AM, Nicolas MICHEL mcl.nico...@gmail.com wrote: You failed because you didn't work enough. If you use dump you are screwing 2 things : 1- your career because it is easy to find it that you are a brain dumper 2- our efforts to keep the value of the certifications are huge because we work very hard and dumbass like you are just brain dumping Idiot Sent from my iPhone On 21 mai 2012, at 09:55, jacob franklin jac.frank1...@gmail.com wrote: Hello I failed my CCIE VOICE written please if anyone has latest dum ps please share the same 80% was new and it cost me. tk ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] unity connection 8
sounds like you need to give the vm more resources. it needs 4 gigs of ram and 160 gigs of disk space, I believe. On May 21, 2012 9:04 AM, Ray jonha...@yahoo.com wrote: can anyone help!! or a link where i can see how to hack and get UC8 install on VM ESXi 4.1 I have a dell 1950 quadcore with 16g Ram and 1T of HDD, I installed vm esxi 4.1.0 on it when i used the cucm business EDition iso install uc8 ,, it say that product not supported on current hardware: cisco unity connection cisco unified business edition 5000 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] unity connection 8
i did that and no good luck From: Brian Valentine bkvalent...@gmail.com To: Ray jonha...@yahoo.com Cc: ccie voice ccie_voice@onlinestudylist.com Sent: Monday, May 21, 2012 9:25 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 sounds like you need to give the vm more resources. it needs 4 gigs of ram and 160 gigs of disk space, I believe. On May 21, 2012 9:04 AM, Ray jonha...@yahoo.com wrote: can anyone help!! or a link where i can see how to hack and get UC8 install on VM ESXi 4.1 I have a dell 1950 quadcorewith 16g Ram and 1T of HDD, I installed vm esxi 4.1.0 on it when i used the cucm business EDition iso install uc8 ,, it say that product not supported on current hardware: cisco unity connection cisco unified business edition 5000 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Vol 2 Lab 2 Question 9.3 SRST Call Forwarding
Do you have ephone - DN configured as dual line or octo line? Also add Transfer pattern .T command. Assuming 5234 is an external number On May 19, 2012 10:37 PM, Jason Murray murr...@usa.com wrote: ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Vol 2 Lab 2 Question 9.3 SRST Call Forwarding
Do you have ephone - dn configured as dual line or octo line? Also add Transfer pattern .T command. Assuming 5234 is an external number configured on a dial-peer On Sat, May 19, 2012 at 9:17 PM, Jason Murray murr...@usa.com wrote: Hello everyone, I searched the forums and found a question that I have but there is no answer to it. Was wondering if anyone had any solution to this. I am going to post the original question since it is the same as I have. Thanks I have been working on Vol2 Lab 2 Question 9.3 SRST section (as below), but I could not find any solution for this. The IPX PG PDF file solution does not work, since it configured with an 'old fashion' alias in call-manager-fallback (as below), which redirects the incoming call to 1001 VM box, not the UC call-handler 5234 as supposed, which is configured as an announcement 'the number you call is not available' and then drop the call. Question - ensure that during SRST mode, incoming calls to ext 1001 will ring on ext 1002. If 1002 does not answer the call, the caller must hear an announcement 'this number is not available' and then drop the call. Solution provided in IPX PG PDF file: call-manager-fallback alias 1 1001 to 1003 cfw 5234 timeout 12 The VOL2 VOD is missing this section as well; and I did a search but not see any solution or suggestion on this OSL neither. I have tried a couple ways which configured ephone-dn call-forwarding or voice hunt-group and then finally sending caller to UC, but it always redirect to 1001 VM. Is this question is still a valid for Vol2 Lab2 SRST, and is anyone has been able to come up with a working solution for it? Thanks, TN. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] unity connection 8
You need to get the correct OVA template. It's not a hack, I think we need to put the right resources, otherwise the option Cisco Unity Connection won't show. *Emanuel Damasceno* CCNP Voice On Mon, May 21, 2012 at 9:09 AM, Ray jonha...@yahoo.com wrote: can anyone help!! or a link where i can see how to hack and get UC8 install on VM ESXi 4.1 I have a dell 1950 quadcore with 16g Ram and 1T of HDD, I installed vm esxi 4.1.0 on it when i used the cucm business EDition iso install uc8 ,, it say that product not supported on current hardware: cisco unity connection cisco unified business edition 5000 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Lab 7 Lan QOS
Is it something like SIP/SIMPLE SOAP towards Presence server and SIP/SIMPLE CTI/QBE towards CUCM ? 2 ACL - one to CUPS and other to CUCM. Together can we call it as 'signalling' from presence communicator? http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/presence.html -- Figure 22-1 Cisco Unified Presence Components http://docwiki.cisco.com/wiki/Cisco_Unified_Presence,_Release_7.x_--_About_the_Interfaces_with_Cisco_Unified_Communications_Manager#About_the_Interfaces_with_Cisco_Unified_Communications_Manager Figure: Cisco Unified Presence Basic Deployment On Mon, May 14, 2012 at 4:19 AM, Brian Turner brianstur...@gmail.comwrote: I think you guys are over thinking it maybe. Isn't all traffic from the CUPC server Signaling traffic? The CUPC server doesn't really do anything but Signaling Media traffic goes from enpoint to endpoint, or endpoint to MTP etc. All other voice traffic is typically considered signaling. So an ACL that just matched all traffic to / from the CUPC server IP address would include signaling traffic for the CUPC server and little else. I didn't see the earlier email concerning the wording of the question, so this is a stab in the dark. Brian S Turner CCIE 6145 On Sun, May 13, 2012 at 11:39 AM, san r luv...@gmail.com wrote: Release Notes for Cisco Unified Personal Communicator Release 7.0 https://mail.google.com/mail/html/compose/static_files/blank_quirks.html#wp85054has got all inbound outbound port usage for CUPC http://www.cisco.com/en/US/docs/voice_ip_comm/cupc/7_0/english/release/notes/ol15710.html On Sun, May 13, 2012 at 5:27 PM, san r luv...@gmail.com wrote: I think we will need to consider the citi port number too On May 13, 2012 2:57 PM, steven moran smoran...@gmail.com wrote: I've been doing some work on this topic and have moved away from my original thoughts which were along the same lines as originally posted by Nazeer and a few others . Here are some recent thoughts on the subject the question is not particularly well worded, we can't really influence the traffic from the CUPC client to the server by applying policy on the server port. What we can do is control what the switch port does with packets from the CUPS server to the clients by classifying and applying an input ploicy on the server port. I went back to the presence section in the CUCM srnd - the only traffic between CUPC and CUPS seems be 5060 for sip/simple and 443 for SOAP, this was sort of backed up by the information in the CUPC 7.1 release. The release notes also mention that ports 16384-16424 are used for TFTP - but this would not be classed as signalling. Since there are other servers on the port any access list would need to specifiy the server IP address. If you wanted to make it really specific you could also specify the destination address of the CUPC clients as well. Finally by putting bidirectional access lists (any any eq and any eq any) you may loose the points as it might appear you are hedging your bets and do not know how directional QoS works. Also we are asked to guarantee 32k for signalling traffic if we put non signalling traffic into this policy we are not achieving the requirements. These statements are not facts, just my current opinion based on the last bits of documentation read and I am happy to discuss. Best regards. Steve ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Lab 7 Lan QOS
If Cisco Unified Personal Communicator is configured for Desk Phone mode, a connection is established with the CTI Manager of Unified CM for phone control. Looks like CTI port needs to be consider only if the CUPC configured in deskphone mode. On Mon, May 21, 2012 at 8:05 PM, san r luv...@gmail.com wrote: Is it something like SIP/SIMPLE SOAP towards Presence server and SIP/SIMPLE CTI/QBE towards CUCM ? 2 ACL - one to CUPS and other to CUCM. Together can we call it as 'signalling' from presence communicator? http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/presence.html -- Figure 22-1 Cisco Unified Presence Components http://docwiki.cisco.com/wiki/Cisco_Unified_Presence,_Release_7.x_--_About_the_Interfaces_with_Cisco_Unified_Communications_Manager#About_the_Interfaces_with_Cisco_Unified_Communications_Manager Figure: Cisco Unified Presence Basic Deployment On Mon, May 14, 2012 at 4:19 AM, Brian Turner brianstur...@gmail.comwrote: I think you guys are over thinking it maybe. Isn't all traffic from the CUPC server Signaling traffic? The CUPC server doesn't really do anything but Signaling Media traffic goes from enpoint to endpoint, or endpoint to MTP etc. All other voice traffic is typically considered signaling. So an ACL that just matched all traffic to / from the CUPC server IP address would include signaling traffic for the CUPC server and little else. I didn't see the earlier email concerning the wording of the question, so this is a stab in the dark. Brian S Turner CCIE 6145 On Sun, May 13, 2012 at 11:39 AM, san r luv...@gmail.com wrote: Release Notes for Cisco Unified Personal Communicator Release 7.0 https://mail.google.com/mail/html/compose/static_files/blank_quirks.html#wp85054has got all inbound outbound port usage for CUPC http://www.cisco.com/en/US/docs/voice_ip_comm/cupc/7_0/english/release/notes/ol15710.html On Sun, May 13, 2012 at 5:27 PM, san r luv...@gmail.com wrote: I think we will need to consider the citi port number too On May 13, 2012 2:57 PM, steven moran smoran...@gmail.com wrote: I've been doing some work on this topic and have moved away from my original thoughts which were along the same lines as originally posted by Nazeer and a few others . Here are some recent thoughts on the subject the question is not particularly well worded, we can't really influence the traffic from the CUPC client to the server by applying policy on the server port. What we can do is control what the switch port does with packets from the CUPS server to the clients by classifying and applying an input ploicy on the server port. I went back to the presence section in the CUCM srnd - the only traffic between CUPC and CUPS seems be 5060 for sip/simple and 443 for SOAP, this was sort of backed up by the information in the CUPC 7.1 release. The release notes also mention that ports 16384-16424 are used for TFTP - but this would not be classed as signalling. Since there are other servers on the port any access list would need to specifiy the server IP address. If you wanted to make it really specific you could also specify the destination address of the CUPC clients as well. Finally by putting bidirectional access lists (any any eq and any eq any) you may loose the points as it might appear you are hedging your bets and do not know how directional QoS works. Also we are asked to guarantee 32k for signalling traffic if we put non signalling traffic into this policy we are not achieving the requirements. These statements are not facts, just my current opinion based on the last bits of documentation read and I am happy to discuss. Best regards. Steve ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] unity connection 8
What's the exact version number you are installing? CUC needs to be 8.0(2) or up for the 8.x train. @ 8.0(2) in Vmware you need 200 GB disk. 8.0(3) went back to 160 GB. DQ d...@cisco.com Sent from my iPhone On May 21, 2012, at 10:54 AM, Ray jonha...@yahoo.com wrote: i did that and no good luck From: Brian Valentine bkvalent...@gmail.com To: Ray jonha...@yahoo.com Cc: ccie voice ccie_voice@onlinestudylist.com Sent: Monday, May 21, 2012 9:25 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 sounds like you need to give the vm more resources. it needs 4 gigs of ram and 160 gigs of disk space, I believe. On May 21, 2012 9:04 AM, Ray jonha...@yahoo.com wrote: can anyone help!! or a link where i can see how to hack and get UC8 install on VM ESXi 4.1 I have a dell 1950 quadcore with 16g Ram and 1T of HDD, I installed vm esxi 4.1.0 on it when i used the cucm business EDition iso install uc8 ,, it say that product not supported on current hardware: cisco unity connection cisco unified business edition 5000 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] unity connection 8
Oh and give it two vCPUs for 8.0(2) as well. DQ d...@cisco.com Sent from my iPhone On May 21, 2012, at 11:12 AM, Dan Quinlan (daquinla) daqui...@cisco.com wrote: What's the exact version number you are installing? CUC needs to be 8.0(2) or up for the 8.x train. @ 8.0(2) in Vmware you need 200 GB disk. 8.0(3) went back to 160 GB. DQ d...@cisco.com Sent from my iPhone On May 21, 2012, at 10:54 AM, Ray jonha...@yahoo.com wrote: i did that and no good luck From: Brian Valentine bkvalent...@gmail.com To: Ray jonha...@yahoo.com Cc: ccie voice ccie_voice@onlinestudylist.com Sent: Monday, May 21, 2012 9:25 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 sounds like you need to give the vm more resources. it needs 4 gigs of ram and 160 gigs of disk space, I believe. On May 21, 2012 9:04 AM, Ray jonha...@yahoo.com wrote: can anyone help!! or a link where i can see how to hack and get UC8 install on VM ESXi 4.1 I have a dell 1950 quadcore with 16g Ram and 1T of HDD, I installed vm esxi 4.1.0 on it when i used the cucm business EDition iso install uc8 ,, it say that product not supported on current hardware: cisco unity connection cisco unified business edition 5000 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] unity connection 8
the version is 8.6 From: Dan Quinlan (daquinla) daqui...@cisco.com To: Ray jonha...@yahoo.com Cc: Brian Valentine bkvalent...@gmail.com; ccie voice ccie_voice@onlinestudylist.com Sent: Monday, May 21, 2012 11:11 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 What's the exact version number you are installing? CUC needs to be 8.0(2) or up for the 8.x train. @ 8.0(2) in Vmware you need 200 GB disk. 8.0(3) went back to 160 GB. DQ d...@cisco.com Sent from my iPhone On May 21, 2012, at 10:54 AM, Ray jonha...@yahoo.com wrote: i did that and no good luck From: Brian Valentine bkvalent...@gmail.com To: Ray jonha...@yahoo.com Cc: ccie voice ccie_voice@onlinestudylist.com Sent: Monday, May 21, 2012 9:25 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 sounds like you need to give the vm more resources. it needs 4 gigs of ram and 160 gigs of disk space, I believe. On May 21, 2012 9:04 AM, Ray jonha...@yahoo.com wrote: can anyone help!! or a link where i can see how to hack and get UC8 install on VM ESXi 4.1 I have a dell 1950 quadcorewith 16g Ram and 1T of HDD, I installed vm esxi 4.1.0 on it when i used the cucm business EDition iso install uc8 ,, it say that product not supported on current hardware: cisco unity connection cisco unified business edition 5000 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] unity connection 8
I don't know if i am using the correct OVA, i but the DVD on Ebay from a guy that had used the same DVD to install it on a dell 1950.. I guess it should work for my own server becasue they are the same, it is a quad core though. From: Emanuel Damasceno aedamasc...@gmail.com To: Ray jonha...@yahoo.com Cc: ccie voice ccie_voice@onlinestudylist.com Sent: Monday, May 21, 2012 10:34 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 You need to get the correct OVA template. It's not a hack, I think we need to put the right resources, otherwise the option Cisco Unity Connection won't show. Emanuel Damasceno CCNP Voice On Mon, May 21, 2012 at 9:09 AM, Ray jonha...@yahoo.com wrote: can anyone help!! or a link where i can see how to hack and get UC8 install on VM ESXi 4.1 I have a dell 1950 quadcorewith 16g Ram and 1T of HDD, I installed vm esxi 4.1.0 on it when i used the cucm business EDition iso install uc8 ,, it say that product not supported on current hardware: cisco unity connection cisco unified business edition 5000 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] unity connection 8
Try using the OVA template to create the VM: http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_(including_OVA/OVF_Templates)#Cisco_Unity_Connection DQ d...@cisco.com On May 21, 2012, at 11:23 AM, Ray jonha...@yahoo.com wrote: the version is 8.6 From: Dan Quinlan (daquinla) daqui...@cisco.com To: Ray jonha...@yahoo.com Cc: Brian Valentine bkvalent...@gmail.com; ccie voice ccie_voice@onlinestudylist.com Sent: Monday, May 21, 2012 11:11 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 What's the exact version number you are installing? CUC needs to be 8.0(2) or up for the 8.x train. @ 8.0(2) in Vmware you need 200 GB disk. 8.0(3) went back to 160 GB. DQ d...@cisco.com Sent from my iPhone On May 21, 2012, at 10:54 AM, Ray jonha...@yahoo.com wrote: i did that and no good luck From: Brian Valentine bkvalent...@gmail.com To: Ray jonha...@yahoo.com Cc: ccie voice ccie_voice@onlinestudylist.com Sent: Monday, May 21, 2012 9:25 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 sounds like you need to give the vm more resources. it needs 4 gigs of ram and 160 gigs of disk space, I believe. On May 21, 2012 9:04 AM, Ray jonha...@yahoo.com wrote: can anyone help!! or a link where i can see how to hack and get UC8 install on VM ESXi 4.1 I have a dell 1950 quadcore with 16g Ram and 1T of HDD, I installed vm esxi 4.1.0 on it when i used the cucm business EDition iso install uc8 ,, it say that product not supported on current hardware: cisco unity connection cisco unified business edition 5000 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] unity connection 8
I have it installed and resources was my issue. The first thing I would do is look for the OVA/OVF for UCxn 8.x on Cisco's website. Look at the resources required and match your VM settings accordingly. I know that Unity Connection requires an additional VCPU to be taken up to allocate for scheduling so It may be that they get you to utilize it by assigning an extra one to the VM. Personally the first thing I would do it create a VM with 2 VCPU, 8 gig of ram and 250 gig drive(this is overkill but if it works you can scale it back from there). If it still doesn't allow you to install it then I'd go from there but I'm almost 90% positive this is the issue your facing. When you install the application, the installer runs a check to see if your system (VM) can support the applications available on that disk. At the time of application selection only those apps that can be supported by your currently setup VM are shown. Bump the resources up a bit more and see what happen s from there. Then only other thing that may be getting you would possibly be CPU power, but I doubt it. If you have a Dell 1950 II then I'd think you're doing ok, especially if you have the Dual Quad core model, but even still it should work. Thanks, Justin McIntyre This email and any files transmitted with it are confidential and are intended for the sole use of the individual to whom they are addressed. Black Box Corporation reserves the right to scan all e-mail traffic for restricted content and to monitor all e-mail in general. If you are not the intended recipient or you have received this email in error, any use, dissemination or forwarding of this email is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE VOICE Written dum ps
Here is a link to the latest PS: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/uc8x.html -Chase -- If winners never quit and quitters never win, then who coined the phrase, Quit while you’re still ahead.? From: dwar...@epochuniversal.com To: mcl.nico...@gmail.com Date: Mon, 21 May 2012 09:17:12 -0400 CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] CCIE VOICE Written dum ps I haven't been replying to many of these email threads, but I have to say that the below email is really just cyber-bullying and should stop now. No excuse. Regards Sent from my iPhone On May 21, 2012, at 5:14 AM, Nicolas MICHEL mcl.nico...@gmail.com wrote: You failed because you didn't work enough. If you use dump you are screwing 2 things : 1- your career because it is easy to find it that you are a brain dumper 2- our efforts to keep the value of the certifications are huge because we work very hard and dumbass like you are just brain dumping Idiot Sent from my iPhone On 21 mai 2012, at 09:55, jacob franklin jac.frank1...@gmail.com wrote: Hello I failed my CCIE VOICE written please if anyone has latest dum ps please share the same 80% was new and it cost me. tk ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] unity connection 8
I have UC8.5.1 running on ESX 4.1. It has 256g HDD and 2g RAM but I can't recall if that was the minimum requirement. I do recall that it took a few shots to install before I up'd it enough. HTH Marty From: Emanuel Damasceno aedamasc...@gmail.com To: Ray jonha...@yahoo.com Cc: ccie voice ccie_voice@onlinestudylist.com Sent: Monday, May 21, 2012 10:34 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 You need to get the correct OVA template. It's not a hack, I think we need to put the right resources, otherwise the option Cisco Unity Connection won't show. Emanuel Damasceno CCNP Voice On Mon, May 21, 2012 at 9:09 AM, Ray jonha...@yahoo.com wrote: can anyone help!! or a link where i can see how to hack and get UC8 install on VM ESXi 4.1 I have a dell 1950 quadcorewith 16g Ram and 1T of HDD, I installed vm esxi 4.1.0 on it when i used the cucm business EDition iso install uc8 ,, it say that product not supported on current hardware: cisco unity connection cisco unified business edition 5000 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] unity connection 8
that trick works,, i bypassed that stage now.. i am installing uc8.. thanks a million times Dan. From: Dan Quinlan (daquinla) daqui...@cisco.com To: Ray jonha...@yahoo.com Sent: Monday, May 21, 2012 11:23 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 It's correct. In vsphere client, select Deploy ova / ovf to create a new VM - think it's on the File Menu. All it does it create a new VM with the proper settings. Then try to load CUC in the new vm that the ova template creates. DQ d...@cisco.com Sent from my iPhone On May 21, 2012, at 12:19 PM, Ray jonha...@yahoo.com wrote: i have downloaded the template,,but dont know what to do next,, is there a doc that u know can show me how to proceed from here.. the ova template is on .88mb too small.. It seems like i have to use it with something big in size..not sure what to use it with.. From: Dan Quinlan (daquinla) daqui...@cisco.com To: Ray jonha...@yahoo.com Cc: Brian Valentine bkvalent...@gmail.com; ccie voice ccie_voice@onlinestudylist.com Sent: Monday, May 21, 2012 10:30 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 Try using the OVA template to create the VM: http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_(including_OVA/OVF_Templates)#Cisco_Unity_Connection DQ d...@cisco.com On May 21, 2012, at 11:23 AM, Ray jonha...@yahoo.com wrote: the version is 8.6 From: Dan Quinlan (daquinla) daqui...@cisco.com To: Ray jonha...@yahoo.com Cc: Brian Valentine bkvalent...@gmail.com; ccie voice ccie_voice@onlinestudylist.com Sent: Monday, May 21, 2012 11:11 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 What's the exact version number you are installing? CUC needs to be 8.0(2) or up for the 8.x train. @ 8.0(2) in Vmware you need 200 GB disk. 8.0(3) went back to 160 GB. DQ d...@cisco.com Sent from my iPhone On May 21, 2012, at 10:54 AM, Ray jonha...@yahoo.com wrote: i did that and no good luck From: Brian Valentine bkvalent...@gmail.com To: Ray jonha...@yahoo.com Cc: ccie voice ccie_voice@onlinestudylist.com Sent: Monday, May 21, 2012 9:25 AM Subject: Re: [OSL | CCIE_Voice] unity connection 8 sounds like you need to give the vm more resources. it needs 4 gigs of ram and 160 gigs of disk space, I believe. On May 21, 2012 9:04 AM, Ray jonha...@yahoo.com wrote: can anyone help!! or a link where i can see how to hack and get UC8 install on VM ESXi 4.1 I have a dell 1950 quadcorewith 16g Ram and 1T of HDD, I installed vm esxi 4.1.0 on it when i used the cucm business EDition iso install uc8 ,, it say that product not supported on current hardware: cisco unity connection cisco unified business edition 5000 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] when i m trying to login with my ICD extension getting an error specified id already in use
What is the CCX version? Can you attach a screenshot of the error? The error you see usually comes when CCX believes that the agent is already logged in. Do you always logout the Agent from CAD when you close your sessions? Make sure the same id/extension is not used anywhere else to login. - Gurpreet On Mon, May 21, 2012 at 10:35 AM, Alpesh Bhakta bhakta.alp...@gmail.comwrote: Hi , when i trying to login with cisco Desktop Agent i m getting an error The Specified id already in use. choose ok will log the current agent out and you will be logged in. choosing 'cancel will close the application.. when i hit ok it gives me error unable to log the agent in. Can any one helpe me please. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] MVA
Thx Dan - will check it out once back in my lab - but from memory, indeed, I think that the EPNM was left empty @RDP Thx a lot for the tip! Juan On 21 May 2012, at 13:21, Dan Quinlan (daquinla) daqui...@cisco.com wrote: Check the external phone number mask on the line on the RDP (not the phone itself.). I think you'll find that it's blank. When you alter a DN for a shared line, you need to propagate the changes. DQ d...@cisco.com Sent from my iPhone On May 21, 2012, at 2:08 AM, Juan Lopez lopez.hernandez.j...@gmail.com wrote: Hi Steven, not sure this was a reply to my question. If so, i was talking about the ANI, not the CNAM :) As for your answer, are you able to show the CNAM when calling à PSTN phone? Can you confirm, as to my knowledge this is not supported - i can only show if for internal calls once answered. Cheers, Juan On 20 May 2012, at 19:23, steven moran smoran...@gmail.com wrote: is the call name missing in the rining or answered state? answer the call on thePSTN side and see if the name is there, if not make sure you have gone to the primary extension number and propagated the call line values to the RDP extension, the user is assocaited with both lines and that the owner ID for the primary phones is the user. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Issue with proctorlabs site
Hey Gents, I updated my IE and java today and now the proctorlabs site won't load the login prompt or show the images of the different lab options. Also, an update on my MAC did the same thing. Has anyone fixed this yet or ran into the same problem? Any help would be greatly appreciated. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Directed Call Park Range + BLF Question
Ok, If i create a DPark number (say 5100) then i have no problem assigning it to a BLF DPark Softkey. However if i create a range of DPark numbers (say 510[0-3] or 510[0123] ) then the numbers do not show up in the drop down while assigning them to a BLF DPark Softkey. Also there is no box to enter a freeform number. Any trick to get this to work ? -- - Pavan ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com