[OSL | CCIE_Voice] IP DHCP failed assigning IP's
Hi all, I configured a DCHP pool , ip phones failed to get IP's when debug the IP hdcp server event and packets I got the following error *DHCPD: Allocate an address without class information (177.3.11.0)* *DHCPD: subnet [177.3.11.1,177.3.11.254] in address pool sitec is empty.* *DHCPD: Sending notification of ASSIGNMENT FAILURE:* * DHCPD: htype 1 chaddr 001d.45e8.a5e6* * DHCPD: remote id 020ab1030b01000b* * DHCPD: circuit id * *DHCPD: Sending notification of ASSIGNMENT_FAILURE:* * DHCPD: due to: POOL EXHAUSTED* * DHCPD: htype 1 chaddr 001d.45e8.a5e6* * DHCPD: remote id 020ab1030b01000b* * DHCPD: circuit id * Here is my configuration : *ip dhcp excluded-address 177.3.11.1 177.3.11.25* *ip dhcp excluded-address 177.3.11.26 177.3.11.254* *!* *ip dhcp pool sitec* * network 177.3.11.0 255.255.255.0* * default-router 177.3.11.1 * * option 150 ip 177.1.10.20 177.1.10.10* * * Any Idea Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] IP DHCP failed assigning IP's
OH what a mistake !!! I updated my config to the correct one *ip dhcp excluded-address 177.3.11.1 177.3.11.25* *ip dhcp excluded-address 177.3.11.28 177.3.11.254* * * * * *:)* On Sat, Mar 30, 2013 at 2:22 PM, CCIEing aboaz...@gmail.com wrote: Hi all, I configured a DCHP pool , ip phones failed to get IP's when debug the IP hdcp server event and packets I got the following error *DHCPD: Allocate an address without class information (177.3.11.0)* *DHCPD: subnet [177.3.11.1,177.3.11.254] in address pool sitec is empty.* *DHCPD: Sending notification of ASSIGNMENT FAILURE:* * DHCPD: htype 1 chaddr 001d.45e8.a5e6* * DHCPD: remote id 020ab1030b01000b* * DHCPD: circuit id * *DHCPD: Sending notification of ASSIGNMENT_FAILURE:* * DHCPD: due to: POOL EXHAUSTED* * DHCPD: htype 1 chaddr 001d.45e8.a5e6* * DHCPD: remote id 020ab1030b01000b* * DHCPD: circuit id * Here is my configuration : *ip dhcp excluded-address 177.3.11.1 177.3.11.25* *ip dhcp excluded-address 177.3.11.26 177.3.11.254* *!* *ip dhcp pool sitec* * network 177.3.11.0 255.255.255.0* * default-router 177.3.11.1 * * option 150 ip 177.1.10.20 177.1.10.10* * * Any Idea Thanks ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] CUCM Call Routing
Hi again for all, I have question regarding the exam, in the CUCM call routing section : If the question does not clearly mention that the Called Party Type and plan is required in some parts of the call routing points.. Is it better to configure the them (call type and plan) or to leave them on the default configuration ? Your input is appreciated ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUCM Call Routing
I don't know how the lab is graded, but I first answer the requirements of the question, which sometimes states to set proper plan/type and sometimes unknown, then for all other call flows that don't specify I set the proper plan/type for those. I do this for both ani and dnis. There are two reasons why I do this - first, I type all the CLI in notepad and configure all the routers at the beginning of the lab (after taking basic notes on gw type, # of channels, etc) and then I go through the gw and call routing sections and modify as needed. Second, it can make reading debugs a little easier as I am used to verifying plan/type for all calls and I only need to make a note of which calls require unknown as the exceptions. Hope this helps... -Justin On Mar 30, 2013 2:04 PM, CCIEing aboaz...@gmail.com wrote: Hi again for all, I have question regarding the exam, in the CUCM call routing section : If the question does not clearly mention that the Called Party Type and plan is required in some parts of the call routing points.. Is it better to configure the them (call type and plan) or to leave them on the default configuration ? Your input is appreciated ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CUCM Call Routing
Thanks Justin, I will adopt your strategy On Sat, Mar 30, 2013 at 9:15 PM, Justin Carney justin.s.car...@gmail.comwrote: I don't know how the lab is graded, but I first answer the requirements of the question, which sometimes states to set proper plan/type and sometimes unknown, then for all other call flows that don't specify I set the proper plan/type for those. I do this for both ani and dnis. There are two reasons why I do this - first, I type all the CLI in notepad and configure all the routers at the beginning of the lab (after taking basic notes on gw type, # of channels, etc) and then I go through the gw and call routing sections and modify as needed. Second, it can make reading debugs a little easier as I am used to verifying plan/type for all calls and I only need to make a note of which calls require unknown as the exceptions. Hope this helps... -Justin On Mar 30, 2013 2:04 PM, CCIEing aboaz...@gmail.com wrote: Hi again for all, I have question regarding the exam, in the CUCM call routing section : If the question does not clearly mention that the Called Party Type and plan is required in some parts of the call routing points.. Is it better to configure the them (call type and plan) or to leave them on the default configuration ? Your input is appreciated ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] BACD embedded scripts
hi Guys, What if we are required to use Embedded Call-Queue and AA Tcl Scriptsnbsp; in the lab. Currently I am practicing by using tcl scripts in the flash (3.0.0.2.tcl) Questions: =nbsp; 1) Do all 12.4 IOS versions support Embedded scripts? 2) How do I check if my IOS supports embedded bacd scripts or not? 3) My IOS version is c2800nm-spservicesk9-mz.124-24.T3.binnbsp; . Does this support embedded tcl scripts? Thanks Guys for your help. -Vir ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] BACD embedded scripts
I believe your IOS has embedded required tcl script. Just run application service app-b-acd-aa Check if your router accepts the second command. If yes (and I believe it will), then you have IOS with embedded B-ACD tcl support. HTH On Sun, Mar 31, 2013 at 9:14 AM, virajith vir...@rediffmail.com wrote: hi Guys, What if we are required to use Embedded Call-Queue and AA Tcl Scripts in the lab. Currently I am practicing by using tcl scripts in the flash (3.0.0.2.tcl) Questions: = 1) Do all 12.4 IOS versions support Embedded scripts? 2) How do I check if my IOS supports embedded bacd scripts or not? 3) My IOS version is c2800nm-spservicesk9-mz.124-24.T3.bin . Does this support embedded tcl scripts? Thanks Guys for your help. -Vir http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle? Get your own *FREE* website and domain with business email solutions, click herehttp://track.rediff.com/click?url=___http://hosting.rediff.com/rediffmailpro/business-email?sc_cid=sig___cmp=siglnk=signsrv1=host ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com -- Suresh Bhandari ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
