Re: [OSL | CCIE_Voice] mva
hi Ragu, I also confused about this if CIsco want to see use 1 or not. However not to conflict it is very easy, u just need to use Translation and change your Remote destination# Other who got 100 score on this, can pls advice? K From: Ragulan Sathasivan s_s_ragu...@yahoo.com To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com Sent: Thursday, August 15, 2013 8:25:44 PM Subject: Re: [OSL | CCIE_Voice] mva Hi Guys, What should be the busy trigger set for the MVA IP Phone ? If I set 1 for the voicemail/Unity Connection requirement then if i call from PSNT phone line which is Remote Destination number then call is not successful. If the busy trigger changed to 2 then the call from the Remote Destination PSTN line to the MVA IP Phone is success. Regards Ragu ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] IPExpert Servers Down?
Anybody else having issues opening IPExpert lab PDF files? It seems that the authentication servers are down. --Todd ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] RSVP Max Sessions
I believe each session is a call leg, but it doesnt really matter because the software sessions don't use any dsp resources so you don't need to be frugal. Many people use max sessions software 500 because that is the highest supported number and it doesn't cost any dsp. When verifying rsvp with show ip rsvp reservation command you will see two rows of info (one for each call leg). With g729 this command will show you 40k if you run the command while ringing or 24k if you run the command once the call is connected. Also, you should take out codec pass-through as that allows endpoints to negotiate codec and you want the mtp locked at g729r8 as listed. Hope this helps... -Justin On Aug 15, 2013 11:09 PM, Josh Petro josh.pe...@gmail.com wrote: Hi All, Can anyone explain the Maximum Sessions command to me, please? Google and Cisco have not helped me tonight.:) If I have the below config in two gateways registered to the CUCM, then I should be allowed two calls max, right? Is a Session considered a call, or just a call leg? dspfarm profile 5 mtp codec g729r8 codec pass-through rsvp maximum sessions software 2 associate application SCCP ! interface Serial0/0/1:0.2 point-to-point ip address 10.10.112.1 255.255.255.0 ip rsvp bandwidth 64 ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Fwd: RSVP Max Sessions
That is something even i am not clear with One call = two call leg Practically if we configure maximum session software 1 the call works? some where i read that two sessions will be used pre call ?? Any comments ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
