then it will download the configuration
from call manager.. Call manager always create full PRI (i.e. 31 channels). I
believe thats the reason you are facing this issue..
Thanks and Regards,
Piyush Jain
Message: 2
Date: Sat, 18 May 2013 16:01:55 -0700
From
configuration and the check box at Gateway (on CUCM) to send
display ie information. See the example below.
int serial 0/0/0:15
isdn out display-ie
Try this, it will solve your problem.
Thanks and Regards,
Piyush Jain
and under
outbound FS enable drop down option. Then in that case it is working for all
the calls.
Any other solution anybody can think of for this FS issue..??
Regards,
Piyush Jain
From: ccie_voice-requ...@onlinestudylist.com
ccie_voice-requ
didn't work for me.
Thanks and Regards,
Piyush Jain
Message: 3
Date: Sun, 19 May 2013 19:53:15 +0530
From: Drake J jdrake...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] UCCX questions / G729 / ringback
Message-ID
didn't work for me.
Thanks and Regards,
Piyush Jain
Message: 3
Date: Sun, 19 May 2013 19:53:15 +0530
From: Drake J jdrake...@gmail.com
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] UCCX questions / G729 / ringback
Message-ID
Hello ccie2k12,
I don't understand what do you mean by SipPublishTrunk in CUCM service
parameter?
Could you please clarify?
Thanks,
Piyush
Message: 1
Date: Fri, 24 May 2013 19:31:59 +0500
From: ccie2k12 ccie2...@gmail.com
To: 'William Bell'
on
switch port connected to CUCM, so the source port number (of CUCM) can be
anything but destination port number (i.e for CUE) should be 2748 (JTAPI port).
Any advice or inputs are most welcome.
Cheers !!
Piyush Jain
___
For more information
Upload Ringlist to SUB CUCM also because your phones are registered to Sub and
will fetch the file from Sub if its active.
Regards,
Piyush Jain
From: Karen Johnson karen.johnson...@yahoo.ca
To: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
